From mboxrd@z Thu Jan 1 00:00:00 1970 From: Viresh Kumar Subject: [PATCH 05/10] ARM64: dts: hi6220: Remove "cooling-{min|max}-level" for CPU nodes Date: Fri, 9 Feb 2018 14:28:05 +0530 Message-ID: <68740229a7397336ae92bad65f69a58c91819c37.1518166039.git.viresh.kumar@linaro.org> References: Return-path: In-Reply-To: In-Reply-To: References: Sender: linux-kernel-owner@vger.kernel.org To: Rafael Wysocki , Wei Xu Cc: Viresh Kumar , linux-pm@vger.kernel.org, Vincent Guittot , Eduardo Valentin , Mark Rutland , Rob Herring , Zhang Rui , linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, daniel.lezcano@linaro.org, linux-kernel@vger.kernel.org List-Id: devicetree@vger.kernel.org The "cooling-min-level" and "cooling-max-level" properties are not parsed by any part of the kernel currently and the max cooling state of a CPU cooling device is found by referring to the cpufreq table instead. Moreover, the entries are incorrect here as min level is 4 and the max level is 0. Remove the unused properties from the CPU nodes. Signed-off-by: Viresh Kumar --- arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index 6a180d1926e8..fca8e4ee98e7 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -88,8 +88,6 @@ next-level-cache = <&CLUSTER0_L2>; clocks = <&stub_clock 0>; operating-points-v2 = <&cpu_opp_table>; - cooling-min-level = <4>; - cooling-max-level = <0>; #cooling-cells = <2>; /* min followed by max */ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; dynamic-power-coefficient = <311>; -- 2.15.0.194.g9af6a3dea062