Re: [PATCH v7 9/9] iio: adc: ad7173: Add support for AD411x devices

["Ceclan, Dumitru" <mitrutzceclan@gmail.com>]

On 13/07/2024 11:12, Krzysztof Kozlowski wrote:
> On 07/06/2024 16:53, Dumitru Ceclan via B4 Relay wrote:
>> From: Dumitru Ceclan <dumitru.ceclan@analog.com>
>>
>> Add support for AD4111/AD4112/AD4114/AD4115/AD4116.
>>
>> The AD411X family encompasses a series of low power, low noise, 24-bit,
>> sigma-delta analog-to-digital converters that offer a versatile range of
>> specifications.
>>
>> This family of ADCs integrates an analog front end suitable for processing
>> both fully differential and single-ended, bipolar voltage inputs
>> addressing a wide array of industrial and instrumentation requirements.
>>
>> - All ADCs have inputs with a precision voltage divider with a division
>>   ratio of 10.
>> - AD4116 has 5 low level inputs without a voltage divider.
>> - AD4111 and AD4112 support current inputs (0 mA to 20 mA) using a 50ohm
>>   shunt resistor.
> 
> Please run scripts/checkpatch.pl and fix reported warnings. Then please
> run `scripts/checkpatch.pl --strict` and (probably) fix more warnings.
> Some warnings can be ignored, especially from --strict run, but the code
> here looks like it needs a fix. Feel free to get in touch if the warning
> is not clear.
> 
> Best regards,
> Krzysztof
> 

I do not get any warnings, only checks

If you meant the checks:
- for the alignment check, i would only argue for struct_group(config_props that looks good
- for unnecessary parentheses the compiler warning appears without the parentheses:
      warning: suggest parentheses around comparison in operand of ‘!=’ [-Wparentheses]