Re: [PATCH 2/3] arm64: dts: qcom: x1e80100-crd: Add pmic-glink node with all 3 connectors

[Konrad Dybcio <konrad.dybcio@linaro.org>]

On 5/27/24 10:07, Abel Vesa wrote:
> Add the pmic-glink node and describe all 3 USB Type-C connectors. Do this
> for USB only, for now. The DP port will come at a later stage since it
> uses a retimer.
> 
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
>   arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 143 ++++++++++++++++++++++++++++++
>   1 file changed, 143 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
> index c5c2895b37c7..2fcc994cbb89 100644
> --- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
> +++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
> @@ -49,6 +49,101 @@ chosen {
>   		stdout-path = "serial0:115200n8";
>   	};
>   
> +	pmic-glink {
> +		compatible = "qcom,x1e80100-pmic-glink",
> +			     "qcom,sm8550-pmic-glink",
> +			     "qcom,pmic-glink";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
> +				    <&tlmm 123 GPIO_ACTIVE_HIGH>,
> +				    <&tlmm 125 GPIO_ACTIVE_HIGH>;
> +
> +		connector@0 {

Could you describe them somehow? e.g.


/* Left rear port */
connector @0 {


There is probably some better terminology to describe the one closer and
farther away from the user, do as you will..

For the QCP, they're numbered on the chassis

Konrad