From: Marek Vasut <marex@denx.de>
To: "Rob Herring (Arm)" <robh@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>,
kernel@dh-electronics.com, linux-kernel@vger.kernel.org,
Fabio Estevam <festevam@gmail.com>,
devicetree@vger.kernel.org, imx@lists.linux.dev,
Pengutronix Kernel Team <kernel@pengutronix.de>,
linux-arm-kernel@lists.infradead.org,
Sascha Hauer <s.hauer@pengutronix.de>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Subject: Re: [PATCH] arm64: dts: imx8mp: Enable HDMI on i.MX8MP DHCOM PDK2 and PDK3
Date: Wed, 15 May 2024 00:18:05 +0200 [thread overview]
Message-ID: <68faa6d9-2053-4b7c-bf34-5b0132234fdb@denx.de> (raw)
In-Reply-To: <171569116690.1193972.14506684066492342240.robh@kernel.org>
On 5/14/24 2:53 PM, Rob Herring (Arm) wrote:
>
> On Tue, 14 May 2024 03:06:42 +0200, Marek Vasut wrote:
>> Enable HDMI output on i.MX8MP DHCOM PDK2 and PDK3. The I2C5 on PDK2 and
>> I2C mux port 1 on PDK3 respectively are used in regular I2C mode instead
>> of HDMI DDC mode to permit connection of other I2C devices on those buses.
>> The pinctrl_hdmi node is part of the SoM DTSI already.
>>
>> Signed-off-by: Marek Vasut <marex@denx.de>
>> ---
>> Cc: Conor Dooley <conor+dt@kernel.org>
>> Cc: Fabio Estevam <festevam@gmail.com>
>> Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
>> Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
>> Cc: Rob Herring <robh@kernel.org>
>> Cc: Sascha Hauer <s.hauer@pengutronix.de>
>> Cc: Shawn Guo <shawnguo@kernel.org>
>> Cc: devicetree@vger.kernel.org
>> Cc: imx@lists.linux.dev
>> Cc: kernel@dh-electronics.com
>> Cc: linux-arm-kernel@lists.infradead.org
>> Cc: linux-kernel@vger.kernel.org
>> ---
>> .../boot/dts/freescale/imx8mp-dhcom-pdk2.dts | 39 +++++++++++++++++++
>> .../boot/dts/freescale/imx8mp-dhcom-pdk3.dts | 39 +++++++++++++++++++
>> 2 files changed, 78 insertions(+)
>>
>
>
> My bot found new DTB warnings on the .dts files added or changed in this
> series.
>
> Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
> are fixed by another series. Ultimately, it is up to the platform
> maintainer whether these warnings are acceptable or not. No need to reply
> unless the platform maintainer has comments.
>
> If you already ran DT checks and didn't see these error(s), then
> make sure dt-schema is up to date:
>
> pip3 install dtschema --upgrade
>
>
> New warnings running 'make CHECK_DTBS=y freescale/imx8mp-dhcom-pdk2.dtb freescale/imx8mp-dhcom-pdk3.dtb' for 20240514010706.245874-1-marex@denx.de:
>
> arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dtb: hdmi@32fd8000: Unevaluated properties are not allowed ('ddc-i2c-bus' was unexpected)
> from schema $id: http://devicetree.org/schemas/display/bridge/fsl,imx8mp-hdmi-tx.yaml#
> arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dtb: hdmi@32fd8000: Unevaluated properties are not allowed ('ddc-i2c-bus' was unexpected)
> from schema $id: http://devicetree.org/schemas/display/bridge/fsl,imx8mp-hdmi-tx.yaml#
Should be fixed in:
[PATCH] dt-bindings: display: synopsys,dw-hdmi: Document ddc-i2c-bus in core
next prev parent reply other threads:[~2024-05-14 22:18 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-14 1:06 [PATCH] arm64: dts: imx8mp: Enable HDMI on i.MX8MP DHCOM PDK2 and PDK3 Marek Vasut
2024-05-14 12:53 ` Rob Herring (Arm)
2024-05-14 22:18 ` Marek Vasut [this message]
2024-05-16 8:00 ` Francesco Dolcini
2024-05-16 11:14 ` Marek Vasut
2024-05-16 11:36 ` Ahmad Fatoum
2024-05-16 11:44 ` Marek Vasut
2024-05-16 11:46 ` Ahmad Fatoum
2024-05-16 12:07 ` Alexander Stein
2024-05-16 11:57 ` Francesco Dolcini
2024-06-15 8:06 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=68faa6d9-2053-4b7c-bf34-5b0132234fdb@denx.de \
--to=marex@denx.de \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@dh-electronics.com \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).