devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: Quentin Schulz <quentin.schulz@free-electrons.com>,
	dmitry.torokhov@gmail.com, robh+dt@kernel.org,
	mark.rutland@arm.com, maxime.ripard@free-electrons.com,
	wens@csie.org, lee.jones@linaro.org, linux@armlinux.org.uk,
	knaack.h@gmx.de, lars@metafoo.de, pmeerw@pmeerw.net
Cc: thomas.petazzoni@free-electrons.com, devicetree@vger.kernel.org,
	linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-sunxi@googlegroups.com, icenowy@aosc.xyz,
	linux-input@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v4 3/8] iio: adc: sun4i-gpadc-iio: move code used in MFD probing to new function
Date: Sat, 8 Apr 2017 18:26:20 +0100	[thread overview]
Message-ID: <696b29b8-da60-1ac1-047e-204c6ce1efa7@kernel.org> (raw)
In-Reply-To: <20170405090634.4649-4-quentin.schulz@free-electrons.com>

On 05/04/17 10:06, Quentin Schulz wrote:
> This moves code used in MFD probing to a new sun4i_gpadc_probe_mfd
> function.
> 
> This driver was initially written for A10, A13 and A31 SoCs which
> already had a DT binding for this IP, thus we needed to use an MFD to
> probe the different drivers without changing the DT binding of these
> SoCs.
> 
> For SoCs that will require to create a DT binding for this IP, we can
> avoid using an MFD, thus we need two separate functions: one for probing
> via MFD and one for probing without MFD.
> 
> This split the code specific to MFD probing in a function separated from
> the driver probe function.
> 
> Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
> Acked-by: Jonathan Cameron <jic23@kernel.org>
Clearly the series is getting split up and going via different trees
which is fine. I'll drop my Ack and apply it to the togreg branch of iio.git
with a signed-off.

Thanks,

Jonathan
> ---
> 
> v3:
>   - updated commit log,
> 
> added in v2
> 
>  drivers/iio/adc/sun4i-gpadc-iio.c | 78 ++++++++++++++++++++++-----------------
>  1 file changed, 45 insertions(+), 33 deletions(-)
> 
> diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
> index a8e134f..7cb997a 100644
> --- a/drivers/iio/adc/sun4i-gpadc-iio.c
> +++ b/drivers/iio/adc/sun4i-gpadc-iio.c
> @@ -454,31 +454,16 @@ static int sun4i_irq_init(struct platform_device *pdev, const char *name,
>  	return 0;
>  }
>  
> -static int sun4i_gpadc_probe(struct platform_device *pdev)
> +static int sun4i_gpadc_probe_mfd(struct platform_device *pdev,
> +				 struct iio_dev *indio_dev)
>  {
> -	struct sun4i_gpadc_iio *info;
> -	struct iio_dev *indio_dev;
> +	struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
> +	struct sun4i_gpadc_dev *sun4i_gpadc_dev =
> +		dev_get_drvdata(pdev->dev.parent);
>  	int ret;
> -	struct sun4i_gpadc_dev *sun4i_gpadc_dev;
> -
> -	sun4i_gpadc_dev = dev_get_drvdata(pdev->dev.parent);
> -
> -	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
> -	if (!indio_dev)
> -		return -ENOMEM;
>  
> -	info = iio_priv(indio_dev);
> -	platform_set_drvdata(pdev, indio_dev);
> -
> -	mutex_init(&info->mutex);
>  	info->regmap = sun4i_gpadc_dev->regmap;
> -	info->indio_dev = indio_dev;
> -	init_completion(&info->completion);
> -	indio_dev->name = dev_name(&pdev->dev);
> -	indio_dev->dev.parent = &pdev->dev;
> -	indio_dev->dev.of_node = pdev->dev.of_node;
> -	indio_dev->info = &sun4i_gpadc_iio_info;
> -	indio_dev->modes = INDIO_DIRECT_MODE;
> +
>  	indio_dev->num_channels = ARRAY_SIZE(sun4i_gpadc_channels);
>  	indio_dev->channels = sun4i_gpadc_channels;
>  
> @@ -519,8 +504,7 @@ static int sun4i_gpadc_probe(struct platform_device *pdev)
>  			dev_err(&pdev->dev,
>  				"could not register thermal sensor: %ld\n",
>  				PTR_ERR(tzd));
> -			ret = PTR_ERR(tzd);
> -			goto err;
> +			return PTR_ERR(tzd);
>  		}
>  	} else {
>  		indio_dev->num_channels =
> @@ -528,36 +512,65 @@ static int sun4i_gpadc_probe(struct platform_device *pdev)
>  		indio_dev->channels = sun4i_gpadc_channels_no_temp;
>  	}
>  
> -	pm_runtime_set_autosuspend_delay(&pdev->dev,
> -					 SUN4I_GPADC_AUTOSUSPEND_DELAY);
> -	pm_runtime_use_autosuspend(&pdev->dev);
> -	pm_runtime_set_suspended(&pdev->dev);
> -	pm_runtime_enable(&pdev->dev);
> -
>  	if (IS_ENABLED(CONFIG_THERMAL_OF)) {
>  		ret = sun4i_irq_init(pdev, "TEMP_DATA_PENDING",
>  				     sun4i_gpadc_temp_data_irq_handler,
>  				     "temp_data", &info->temp_data_irq,
>  				     &info->ignore_temp_data_irq);
>  		if (ret < 0)
> -			goto err;
> +			return ret;
>  	}
>  
>  	ret = sun4i_irq_init(pdev, "FIFO_DATA_PENDING",
>  			     sun4i_gpadc_fifo_data_irq_handler, "fifo_data",
>  			     &info->fifo_data_irq, &info->ignore_fifo_data_irq);
>  	if (ret < 0)
> -		goto err;
> +		return ret;
>  
>  	if (IS_ENABLED(CONFIG_THERMAL_OF)) {
>  		ret = iio_map_array_register(indio_dev, sun4i_gpadc_hwmon_maps);
>  		if (ret < 0) {
>  			dev_err(&pdev->dev,
>  				"failed to register iio map array\n");
> -			goto err;
> +			return ret;
>  		}
>  	}
>  
> +	return 0;
> +}
> +
> +static int sun4i_gpadc_probe(struct platform_device *pdev)
> +{
> +	struct sun4i_gpadc_iio *info;
> +	struct iio_dev *indio_dev;
> +	int ret;
> +
> +	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
> +	if (!indio_dev)
> +		return -ENOMEM;
> +
> +	info = iio_priv(indio_dev);
> +	platform_set_drvdata(pdev, indio_dev);
> +
> +	mutex_init(&info->mutex);
> +	info->indio_dev = indio_dev;
> +	init_completion(&info->completion);
> +	indio_dev->name = dev_name(&pdev->dev);
> +	indio_dev->dev.parent = &pdev->dev;
> +	indio_dev->dev.of_node = pdev->dev.of_node;
> +	indio_dev->info = &sun4i_gpadc_iio_info;
> +	indio_dev->modes = INDIO_DIRECT_MODE;
> +
> +	ret = sun4i_gpadc_probe_mfd(pdev, indio_dev);
> +	if (ret)
> +		return ret;
> +
> +	pm_runtime_set_autosuspend_delay(&pdev->dev,
> +					 SUN4I_GPADC_AUTOSUSPEND_DELAY);
> +	pm_runtime_use_autosuspend(&pdev->dev);
> +	pm_runtime_set_suspended(&pdev->dev);
> +	pm_runtime_enable(&pdev->dev);
> +
>  	ret = devm_iio_device_register(&pdev->dev, indio_dev);
>  	if (ret < 0) {
>  		dev_err(&pdev->dev, "could not register the device\n");
> @@ -570,7 +583,6 @@ static int sun4i_gpadc_probe(struct platform_device *pdev)
>  	if (IS_ENABLED(CONFIG_THERMAL_OF))
>  		iio_map_array_unregister(indio_dev);
>  
> -err:
>  	pm_runtime_put(&pdev->dev);
>  	pm_runtime_disable(&pdev->dev);
>  
> 

  reply	other threads:[~2017-04-08 17:26 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-05  9:06 [PATCH v4 0/8] add thermal throttling to Allwinner A33 SoC Quentin Schulz
     [not found] ` <20170405090634.4649-1-quentin.schulz-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2017-04-05  9:06   ` [PATCH v4 1/8] dt-bindings: mfd: add A33 GPADC binding Quentin Schulz
     [not found]     ` <20170405090634.4649-2-quentin.schulz-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2017-04-05 12:11       ` Lee Jones
2017-04-05  9:06   ` [PATCH v4 2/8] dt-bindings: input: touschcreen: remove sun4i documentation Quentin Schulz
     [not found]     ` <20170405090634.4649-3-quentin.schulz-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2017-04-05 12:11       ` Lee Jones
2017-04-05  9:06   ` [PATCH v4 3/8] iio: adc: sun4i-gpadc-iio: move code used in MFD probing to new function Quentin Schulz
2017-04-08 17:26     ` Jonathan Cameron [this message]
2017-04-05  9:06   ` [PATCH v4 4/8] iio: adc: sun4i-gpadc-iio: add support for A33 thermal sensor Quentin Schulz
2017-04-08 16:36     ` Jonathan Cameron
2017-04-05  9:06   ` [PATCH v4 5/8] ARM: sun8i: a33: add " Quentin Schulz
     [not found]     ` <20170405090634.4649-6-quentin.schulz-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2017-04-05 12:12       ` Maxime Ripard
2017-04-05  9:06   ` [PATCH v4 6/8] ARM: sun8i: a33: add CPU thermal throttling Quentin Schulz
     [not found]     ` <20170405090634.4649-7-quentin.schulz-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2017-04-05 12:13       ` Maxime Ripard
2017-04-05  9:06   ` [PATCH v4 7/8] ARM: sun8i: a33: Add devfreq-based GPU cooling Quentin Schulz
     [not found]     ` <20170405090634.4649-8-quentin.schulz-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2017-04-05 12:16       ` Maxime Ripard
2017-04-05  9:06   ` [PATCH v4 8/8] ARM: sun8i: sina33: add highest OPP of CPUs Quentin Schulz
     [not found]     ` <20170405090634.4649-9-quentin.schulz-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2017-04-05 12:17       ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=696b29b8-da60-1ac1-047e-204c6ce1efa7@kernel.org \
    --to=jic23@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=icenowy@aosc.xyz \
    --cc=knaack.h@gmx.de \
    --cc=lars@metafoo.de \
    --cc=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=linux@armlinux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=maxime.ripard@free-electrons.com \
    --cc=pmeerw@pmeerw.net \
    --cc=quentin.schulz@free-electrons.com \
    --cc=robh+dt@kernel.org \
    --cc=thomas.petazzoni@free-electrons.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).