Re: [PATCH 3/3] arm64: dts: qcom: qcs8300: Add clocks for QoS configuration

[Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>]

On 11/29/2025 3:04 PM, Krzysztof Kozlowski wrote:
> On 28/11/2025 16:01, Odelu Kukatla wrote:
>> Add clocks which need to be enabled for configuring QoS on
>> qcs8300 SoC.
>>
>> Signed-off-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
>> ---
>>  arch/arm64/boot/dts/qcom/monaco.dtsi | 6 ++++++
>>  1 file changed, 6 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/monaco.dtsi b/arch/arm64/boot/dts/qcom/monaco.dtsi
>> index 816fa2af8a9a..6139511ea525 100644
>> --- a/arch/arm64/boot/dts/qcom/monaco.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/monaco.dtsi
>> @@ -2226,6 +2226,10 @@
>>  			reg = <0x0 0x016c0000 0x0 0x17080>;
>>  			#interconnect-cells = <2>;
>>  			qcom,bcm-voters = <&apps_bcm_voter>;
>> +			clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
>> +				 <&gcc GCC_AGGRE_NOC_QUPV3_AXI_CLK>,
>> +				 <&gcc GCC_AGGRE_USB2_PRIM_AXI_CLK>,
>> +				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
> 
> Your binding said all interconnects have clocks, so please update all of
> them. Not only three out of 10-or-whatever-in-total-you-have.
> 

Thanks Krzysztof!
Not all interconnects have clocks/MMIO, I will update the bindings as
you suggested in the fix:
https://lore.kernel.org/all/20251129094612.16838-2-krzysztof.kozlowski@oss.qualcomm.com/


Thanks,
Odelu

> 
> Best regards,
> Krzysztof