From: Christian Marangi <ansuelsmth@gmail.com>
To: Lorenzo Bianconi <lorenzo@kernel.org>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Simon Horman <horms@kernel.org>, Jonathan Corbet <corbet@lwn.net>,
Shuah Khan <skhan@linuxfoundation.org>,
Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>,
Saravana Kannan <saravanak@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
Nathan Chancellor <nathan@kernel.org>,
Nick Desaulniers <nick.desaulniers+lkml@gmail.com>,
Bill Wendling <morbo@google.com>,
Justin Stitt <justinstitt@google.com>,
netdev@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, llvm@lists.linux.dev
Subject: Re: [PATCH net-next v6 12/12] net: airoha: add phylink support
Date: Wed, 10 Jun 2026 01:51:39 +0200 [thread overview]
Message-ID: <6a28a70f.3dabba3e.312002.39c0@mx.google.com> (raw)
In-Reply-To: <aigxaDtZDnI-RTwN@lore-desk>
On Tue, Jun 09, 2026 at 05:29:44PM +0200, Lorenzo Bianconi wrote:
> > Add phylink support for each GDM port. For GDM1 add the internal interface
> > mode as the only supported mode. For GDM2/3/4 add the required
> > configuration of the PCS to make the external PHY or attached SFP cage
> > work.
> >
> > These needs to be defined in the GDM port node using the pcs-handle
> > property.
> >
> > Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
>
> Hi Christian,
>
> some nits inline.
>
> Regards,
> Lorenzo
>
> > ---
> > drivers/net/ethernet/airoha/Kconfig | 1 +
> > drivers/net/ethernet/airoha/airoha_eth.c | 167 +++++++++++++++++++++-
> > drivers/net/ethernet/airoha/airoha_eth.h | 3 +
> > drivers/net/ethernet/airoha/airoha_regs.h | 12 ++
> > 4 files changed, 181 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/net/ethernet/airoha/Kconfig b/drivers/net/ethernet/airoha/Kconfig
> > index ad3ce501e7a5..38dcc76e5998 100644
> > --- a/drivers/net/ethernet/airoha/Kconfig
> > +++ b/drivers/net/ethernet/airoha/Kconfig
> > @@ -20,6 +20,7 @@ config NET_AIROHA
> > depends on NET_DSA || !NET_DSA
> > select NET_AIROHA_NPU
> > select PAGE_POOL
> > + select PHYLINK
> > help
> > This driver supports the gigabit ethernet MACs in the
> > Airoha SoC family.
> > diff --git a/drivers/net/ethernet/airoha/airoha_eth.c b/drivers/net/ethernet/airoha/airoha_eth.c
> > index 5a8e84fa9918..eabd7b058f82 100644
> > --- a/drivers/net/ethernet/airoha/airoha_eth.c
> > +++ b/drivers/net/ethernet/airoha/airoha_eth.c
> > @@ -8,6 +8,7 @@
> > #include <linux/of_reserved_mem.h>
> > #include <linux/platform_device.h>
> > #include <linux/tcp.h>
> > +#include <linux/pcs/pcs.h>
>
> Can you please respect the alphabetic order?
>
> > #include <linux/u64_stats_sync.h>
> > #include <net/dst_metadata.h>
> > #include <net/page_pool/helpers.h>
> > @@ -1779,6 +1780,15 @@ static int airoha_dev_open(struct net_device *netdev)
> > u32 cur_len, pse_port = FE_PSE_PORT_PPE1;
> > struct airoha_qdma *qdma = dev->qdma;
> >
> > + err = phylink_of_phy_connect(dev->phylink, netdev->dev.of_node, 0);
> > + if (err) {
> > + netdev_err(netdev, "%s: could not attach PHY: %d\n", __func__,
> > + err);
>
> Do we need specify the __func__ argument here?
>
I was following a pattern also used in other driver. Maybe we should stop
following it?
> > + return err;
> > + }
> > +
> > + phylink_start(dev->phylink);
> > +
> > netif_tx_start_all_queues(netdev);
> > err = airoha_set_vip_for_gdm_port(dev, true);
> > if (err)
> > @@ -1876,6 +1886,9 @@ static int airoha_dev_stop(struct net_device *netdev)
> > }
> > }
> >
> > + phylink_stop(dev->phylink);
> > + phylink_disconnect_phy(dev->phylink);
> > +
> > return 0;
> > }
> >
> > @@ -3148,6 +3161,153 @@ bool airoha_is_valid_gdm_dev(struct airoha_eth *eth,
> > return false;
> > }
> >
> > +/* Nothing to do in MAC, everything is handled in PCS */
> > +static void airoha_mac_config(struct phylink_config *config, unsigned int mode,
> > + const struct phylink_link_state *state)
> > +{
> > +}
> > +
> > +static void airoha_mac_link_up(struct phylink_config *config, struct phy_device *phy,
> > + unsigned int mode, phy_interface_t interface,
> > + int speed, int duplex, bool tx_pause, bool rx_pause)
> > +{
> > + struct airoha_gdm_dev *dev = container_of(config, struct airoha_gdm_dev,
> > + phylink_config);
> > + struct airoha_gdm_port *port = dev->port;
> > + struct airoha_eth *eth = dev->eth;
> > + u32 frag_size_tx, frag_size_rx;
> > + u32 mask, val;
> > +
> > + /* TX/RX frag is configured only for GDM4 */
> > + if (port->id != 4)
>
> if (port->id != AIROHA_GDM4_IDX)
> ...
>
> > + return;
> > +
> > + switch (speed) {
> > + case SPEED_10000:
> > + case SPEED_5000:
> > + frag_size_tx = 8;
> > + frag_size_rx = 8;
> > + break;
> > + case SPEED_2500:
> > + frag_size_tx = 2;
> > + frag_size_rx = 1;
> > + break;
> > + default:
> > + frag_size_tx = 1;
> > + frag_size_rx = 0;
> > + }
> > +
> > + /* Configure TX/RX frag based on speed */
> > + if (dev->nbq == 1) {
> > + mask = GDMA4_SGMII1_TX_FRAG_SIZE_MASK;
> > + val = FIELD_PREP(GDMA4_SGMII1_TX_FRAG_SIZE_MASK,
> > + frag_size_tx);
> > + } else {
> > + mask = GDMA4_SGMII0_TX_FRAG_SIZE_MASK;
> > + val = FIELD_PREP(GDMA4_SGMII0_TX_FRAG_SIZE_MASK,
> > + frag_size_tx);
> > + }
> > + airoha_fe_rmw(eth, REG_GDMA4_TMBI_FRAG, mask, val);
> > +
> > + if (dev->nbq == 1) {
> > + mask = GDMA4_SGMII1_RX_FRAG_SIZE_MASK;
> > + val = FIELD_PREP(GDMA4_SGMII1_RX_FRAG_SIZE_MASK,
> > + frag_size_tx);
> > + } else {
> > + mask = GDMA4_SGMII0_RX_FRAG_SIZE_MASK;
> > + val = FIELD_PREP(GDMA4_SGMII0_RX_FRAG_SIZE_MASK,
> > + frag_size_tx);
> > + }
> > + airoha_fe_rmw(eth, REG_GDMA4_RMBI_FRAG, mask, val);
> > +}
> > +
> > +/* Nothing to do in MAC, everything is handled in PCS */
> > +static void airoha_mac_link_down(struct phylink_config *config, unsigned int mode,
> > + phy_interface_t interface)
> > +{
> > +}
> > +
> > +static const struct phylink_mac_ops airoha_phylink_ops = {
> > + .mac_config = airoha_mac_config,
> > + .mac_link_up = airoha_mac_link_up,
> > + .mac_link_down = airoha_mac_link_down,
> > +};
> > +
> > +static int airoha_fill_available_pcs(struct phylink_config *config,
> > + struct phylink_pcs **available_pcs,
> > + unsigned int num_available_pcs)
> > +{
> > + struct device *dev = config->dev;
> > +
> > + return fwnode_phylink_pcs_parse(dev_fwnode(dev), available_pcs,
> > + &num_available_pcs);
> > +}
> > +
> > +static int airoha_setup_phylink(struct net_device *netdev)
> > +{
> > + struct airoha_gdm_dev *dev = netdev_priv(netdev);
> > + struct device_node *np = netdev->dev.of_node;
> > + struct airoha_gdm_port *port = dev->port;
> > + struct phylink_config *config;
> > + phy_interface_t phy_mode;
> > + struct phylink *phylink;
> > + int err;
> > +
> > + err = of_get_phy_mode(np, &phy_mode);
> > + if (err) {
> > + dev_err(&netdev->dev, "incorrect phy-mode\n");
> > + return err;
> > + }
> > +
> > + config = &dev->phylink_config;
>
> remove new-line here.
>
> > +
> > + config->dev = &netdev->dev;
> > + config->type = PHYLINK_NETDEV;
> > + config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | MAC_10000FD;
> > + if (port->id > AIROHA_GDM1_IDX)
>
> maybe
> if (port->id != AIROHA_GDM1_IDX)
> ...
>
> > + config->mac_capabilities |= MAC_10 | MAC_100 | MAC_1000 |
> > + MAC_2500FD | MAC_5000FD;
> > +
> > + err = fwnode_phylink_pcs_parse(dev_fwnode(&netdev->dev), NULL,
> > + &config->num_available_pcs);
> > + if (err)
> > + return err;
> > +
> > + config->fill_available_pcs = airoha_fill_available_pcs;
> > +
> > + /*
> > + * GDM1 only supports internal for Embedded Switch
> > + * and doesn't require a PCS.
> > + */
> > + if (port->id == AIROHA_GDM1_IDX) {
> > + __set_bit(PHY_INTERFACE_MODE_INTERNAL,
> > + config->supported_interfaces);
> > + } else {
> > + __set_bit(PHY_INTERFACE_MODE_SGMII,
> > + config->supported_interfaces);
> > + __set_bit(PHY_INTERFACE_MODE_1000BASEX,
> > + config->supported_interfaces);
> > + __set_bit(PHY_INTERFACE_MODE_2500BASEX,
> > + config->supported_interfaces);
> > + __set_bit(PHY_INTERFACE_MODE_10GBASER,
> > + config->supported_interfaces);
> > + __set_bit(PHY_INTERFACE_MODE_USXGMII,
> > + config->supported_interfaces);
> > +
> > + phy_interface_copy(config->pcs_interfaces,
> > + config->supported_interfaces);
> > + }
> > +
> > + phylink = phylink_create(config, of_fwnode_handle(np),
> > + phy_mode, &airoha_phylink_ops);
> > + if (IS_ERR(phylink))
> > + return PTR_ERR(phylink);
> > +
> > + dev->phylink = phylink;
> > +
> > + return 0;
> > +}
> > +
> > static int airoha_alloc_gdm_device(struct airoha_eth *eth,
> > struct airoha_gdm_port *port,
> > int nbq, struct device_node *np)
> > @@ -3210,7 +3370,7 @@ static int airoha_alloc_gdm_device(struct airoha_eth *eth,
> > dev->nbq = nbq;
> > port->devs[index] = dev;
> >
> > - return 0;
> > + return airoha_setup_phylink(netdev);
> > }
> >
> > static int airoha_alloc_gdm_port(struct airoha_eth *eth,
> > @@ -3435,8 +3595,10 @@ static int airoha_probe(struct platform_device *pdev)
> > continue;
> >
> > netdev = netdev_from_priv(dev);
> > - if (netdev->reg_state == NETREG_REGISTERED)
> > + if (netdev->reg_state == NETREG_REGISTERED) {
> > + phylink_destroy(dev->phylink);
> > unregister_netdev(netdev);
> > + }
> > of_node_put(netdev->dev.of_node);
> > }
> > airoha_metadata_dst_free(port);
> > @@ -3472,6 +3634,7 @@ static void airoha_remove(struct platform_device *pdev)
> > continue;
> >
> > netdev = netdev_from_priv(dev);
> > + phylink_destroy(dev->phylink);
> > unregister_netdev(netdev);
> > of_node_put(netdev->dev.of_node);
> > }
> > diff --git a/drivers/net/ethernet/airoha/airoha_eth.h b/drivers/net/ethernet/airoha/airoha_eth.h
> > index 8f42973f9cf5..1b25603dc64d 100644
> > --- a/drivers/net/ethernet/airoha/airoha_eth.h
> > +++ b/drivers/net/ethernet/airoha/airoha_eth.h
> > @@ -554,6 +554,9 @@ struct airoha_gdm_dev {
> >
> > u32 flags;
> > int nbq;
> > +
> > + struct phylink *phylink;
> > + struct phylink_config phylink_config;
> > };
> >
> > struct airoha_gdm_port {
> > diff --git a/drivers/net/ethernet/airoha/airoha_regs.h b/drivers/net/ethernet/airoha/airoha_regs.h
> > index 436f3c8779c1..27f2583e143a 100644
> > --- a/drivers/net/ethernet/airoha/airoha_regs.h
> > +++ b/drivers/net/ethernet/airoha/airoha_regs.h
> > @@ -358,6 +358,18 @@
> > #define IP_FRAGMENT_PORT_MASK GENMASK(8, 5)
> > #define IP_FRAGMENT_NBQ_MASK GENMASK(4, 0)
> >
> > +#define REG_GDMA4_TMBI_FRAG 0x2028
> > +#define GDMA4_SGMII1_TX_WEIGHT_MASK GENMASK(31, 26)
> > +#define GDMA4_SGMII1_TX_FRAG_SIZE_MASK GENMASK(25, 16)
> > +#define GDMA4_SGMII0_TX_WEIGHT_MASK GENMASK(15, 10)
> > +#define GDMA4_SGMII0_TX_FRAG_SIZE_MASK GENMASK(9, 0)
> > +
> > +#define REG_GDMA4_RMBI_FRAG 0x202c
> > +#define GDMA4_SGMII1_RX_WEIGHT_MASK GENMASK(31, 26)
> > +#define GDMA4_SGMII1_RX_FRAG_SIZE_MASK GENMASK(25, 16)
> > +#define GDMA4_SGMII0_RX_WEIGHT_MASK GENMASK(15, 10)
> > +#define GDMA4_SGMII0_RX_FRAG_SIZE_MASK GENMASK(9, 0)
> > +
> > #define REG_MC_VLAN_EN 0x2100
> > #define MC_VLAN_EN_MASK BIT(0)
> >
> > --
> > 2.53.0
> >
--
Ansuel
prev parent reply other threads:[~2026-06-09 23:51 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-09 15:11 [PATCH net-next v6 00/12] net: pcs: Introduce support for fwnode PCS Christian Marangi
2026-06-09 15:11 ` [PATCH net-next v6 01/12] net: phylink: keep and use MAC supported_interfaces in phylink struct Christian Marangi
2026-06-09 15:11 ` [PATCH net-next v6 02/12] net: phylink: introduce internal phylink PCS handling Christian Marangi
2026-06-09 15:11 ` [PATCH net-next v6 03/12] net: phylink: add phylink_release_pcs() to externally release a PCS Christian Marangi
2026-06-09 15:12 ` [PATCH net-next v6 04/12] net: pcs: implement Firmware node support for PCS driver Christian Marangi
2026-06-09 15:12 ` [PATCH net-next v6 05/12] net: phylink: support late PCS provider attach Christian Marangi
2026-06-09 15:12 ` [PATCH net-next v6 06/12] net: Document PCS subsystem Christian Marangi
2026-06-09 15:12 ` [PATCH net-next v6 07/12] MAINTAINERS: add myself as PCS subsystem maintainer Christian Marangi
2026-06-09 15:12 ` [PATCH net-next v6 08/12] of: property: fw_devlink: Add support for "pcs-handle" Christian Marangi
2026-06-09 15:12 ` [PATCH net-next v6 09/12] net: phylink: add .pcs_link_down PCS OP Christian Marangi
2026-06-09 15:12 ` [PATCH net-next v6 10/12] dt-bindings: net: pcs: Document support for Airoha Ethernet PCS Christian Marangi
2026-06-09 15:12 ` [PATCH net-next v6 11/12] net: pcs: airoha: add PCS driver for Airoha AN7581 SoC Christian Marangi
2026-06-09 15:12 ` [PATCH net-next v6 12/12] net: airoha: add phylink support Christian Marangi
2026-06-09 15:29 ` Lorenzo Bianconi
2026-06-09 23:51 ` Christian Marangi [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6a28a70f.3dabba3e.312002.39c0@mx.google.com \
--to=ansuelsmth@gmail.com \
--cc=andrew+netdev@lunn.ch \
--cc=conor+dt@kernel.org \
--cc=corbet@lwn.net \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=hkallweit1@gmail.com \
--cc=horms@kernel.org \
--cc=justinstitt@google.com \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux@armlinux.org.uk \
--cc=llvm@lists.linux.dev \
--cc=lorenzo@kernel.org \
--cc=morbo@google.com \
--cc=nathan@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=nick.desaulniers+lkml@gmail.com \
--cc=p.zabel@pengutronix.de \
--cc=pabeni@redhat.com \
--cc=robh@kernel.org \
--cc=saravanak@kernel.org \
--cc=skhan@linuxfoundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox