From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Wu, Songjun" Subject: Re: [PATCH v4 2/2] [media] atmel-isc: DT binding for Image Sensor Controller driver Date: Sun, 12 Jun 2016 11:04:27 +0800 Message-ID: <6a878440-042f-c447-19cb-aa05b5dc535d@atmel.com> References: <1465283513-30224-1-git-send-email-songjun.wu@atmel.com> <1465283513-30224-3-git-send-email-songjun.wu@atmel.com> <20160608235753.46e73078@bbrezillon> Mime-Version: 1.0 Content-Type: text/plain; charset="windows-1252"; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20160608235753.46e73078@bbrezillon> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Boris Brezillon Cc: laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org, nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org, alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org, robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Kumar Gala , linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Ian Campbell , Rob Herring , Pawel Moll , Mark Rutland List-Id: devicetree@vger.kernel.org On 6/9/2016 05:57, Boris Brezillon wrote: > On Tue, 7 Jun 2016 15:11:53 +0800 > Songjun Wu wrote: > >> DT binding documentation for ISC driver. >> >> Signed-off-by: Songjun Wu >> --- >> >> Changes in v4: >> - Remove the isc clock nodes. >> >> Changes in v3: >> - Remove the 'atmel,sensor-preferred'. >> - Modify the isc clock node according to the Rob's remarks. >> >> Changes in v2: >> - Remove the unit address of the endpoint. >> - Add the unit address to the clock node. >> - Avoid using underscores in node names. >> - Drop the "0x" in the unit address of the i2c node. >> - Modify the description of 'atmel,sensor-preferred'. >> - Add the description for the ISC internal clock. >> >> .../devicetree/bindings/media/atmel-isc.txt | 69 ++++++++++++++++++++++ >> 1 file changed, 69 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/media/atmel-isc.txt >> >> diff --git a/Documentation/devicetree/bindings/media/atmel-isc.txt b/Documentation/devicetree/bindings/media/atmel-isc.txt >> new file mode 100644 >> index 0000000..3f83524 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/media/atmel-isc.txt >> @@ -0,0 +1,69 @@ >> +Atmel Image Sensor Controller (ISC) >> +---------------------------------------------- >> + >> +Required properties for ISC: >> +- compatible >> + Must be "atmel,sama5d2-isc". >> +- reg >> + Physical base address and length of the registers set for the device. >> +- interrupts >> + Should contain IRQ line for the ISC. >> +- clocks >> + List of clock specifiers, corresponding to entries in >> + the clock-names property; >> + Please refer to clock-bindings.txt. >> +- clock-names >> + Required elements: "hclock". >> +- #clock-cells >> + Should be 0. >> +- clock-output-names >> + Should contain the name of the clock driving the sensor master clock. >> +- pinctrl-names, pinctrl-0 >> + Please refer to pinctrl-bindings.txt. >> + >> + >> +ISC supports a single port node with parallel bus. It should contain one >> +'port' child node with child 'endpoint' node. Please refer to the bindings >> +defined in Documentation/devicetree/bindings/media/video-interfaces.txt. >> + >> +Example: >> +isc: isc@f0008000 { >> + compatible = "atmel,sama5d2-isc"; >> + reg = <0xf0008000 0x4000>; >> + interrupts = <46 IRQ_TYPE_LEVEL_HIGH 5>; >> + clocks = <&isc_clk>, <&iscck>, <&isc_gclk>; >> + clock-names = "hclock"; > > You have 3 clocks here and only one name. Are you sure this example is > actually working? > The isc_clk is mandatory, but the other two clocks are optional, so I did not give their name. This example is tested. Should I add the name for the other two clocks? >> + #clock-cells = <0>; >> + clock-output-names = "isc-mck"; >> + >> + port { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + isc_0: endpoint { >> + remote-endpoint = <&ov7740_0>; >> + hsync-active = <1>; >> + vsync-active = <0>; >> + pclk-sample = <1>; >> + }; >> + }; >> + >> + >> +}; >> + >> +i2c1: i2c@fc028000 { >> + ov7740: camera@21 { >> + compatible = "ovti,ov7740"; >> + reg = <0x21>; >> + >> + clocks = <&isc>; >> + clock-names = "xvclk"; >> + assigned-clocks = <&isc>; >> + assigned-clock-rates = <24000000>; >> + >> + port { >> + ov7740_0: endpoint { >> + remote-endpoint = <&isc_0>; >> + }; >> + }; >> +}; > > > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html