Re: [PATCH v13 08/10] arm64: dts: qcom: sc8280xp: Add multiport controller node for SC8280

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 08/10/2023 13:21, Krishna Kurapati PSSNV wrote:
> 
> 
> On 10/8/2023 4:41 PM, Krzysztof Kozlowski wrote:
>> On 07/10/2023 17:48, Krishna Kurapati wrote:
>>> Add USB and DWC3 node for tertiary port of SC8280 along with multiport
>>> IRQ's and phy's. This will be used as a base for SA8295P and SA8295-Ride
>>> platforms.
>>>
>>> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
>>> ---
>>>   arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 84 ++++++++++++++++++++++++++
>>>   1 file changed, 84 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
>>> index cad59af7ccef..5f64f75b07db 100644
>>> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
>>> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
>>> @@ -3330,6 +3330,90 @@ system-cache-controller@9200000 {
>>>   			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
>>>   		};
>>>   
>>> +		usb_2: usb@a4f8800 {
>>> +			compatible = "qcom,sc8280xp-dwc3-mp", "qcom,dwc3";
>>
>> There is no such compatible. Scrolling through 3 pages of cover letter,
>> I did not find dependency listed. I did not scroll more - dependency is
>> the most important piece, so I would assume it is in the top-part.
>>
> Hi Krzysztof,
> 
>   I rebased the series on top of latest usb-next. I mentioned in cover 
> letter that the first 3 patches have been merged on usb-next and this 
> series has the remaining 10 patches. Apologies, I must have mentioned 
> commit number of the merged patches as well for better context. The 
> compatible was merged in the patch [1].

OK, I see it now in latest next.

Best regards,
Krzysztof