devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Icenowy Zheng <uwu@icenowy.me>
To: Drew Fustini <fustini@kernel.org>
Cc: Guo Ren <guoren@kernel.org>, Fu Wei <wefu@redhat.com>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Han Gao <rabenda.cn@gmail.com>, Yao Zi <ziyao@disroot.org>,
	 linux-riscv@lists.infradead.org, devicetree@vger.kernel.org,
	 linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/3] riscv: dts: thead: th1520: add coefficients to the PVT node
Date: Sat, 23 Aug 2025 22:37:13 +0800	[thread overview]
Message-ID: <6ac480db63aff3c59603db16e00b9c7b6580b663.camel@icenowy.me> (raw)
In-Reply-To: <aKjhOuqlQyuLCVEK@x1>

在 2025-08-22星期五的 14:29 -0700,Drew Fustini写道:
> On Sat, Aug 16, 2025 at 05:32:07PM +0800, Icenowy Zheng wrote:
> > The manual of TH1520 contains a set of coefficients a little
> > different
> > to the driver default ones.
> > 
> > Add them to the device tree node of PVT.
> > 
> > Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
> > ---
> >  arch/riscv/boot/dts/thead/th1520.dtsi | 4 ++++
> >  1 file changed, 4 insertions(+)
> > 
> > diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi
> > b/arch/riscv/boot/dts/thead/th1520.dtsi
> > index 03f1d73190499..e9c81bdabed8a 100644
> > --- a/arch/riscv/boot/dts/thead/th1520.dtsi
> > +++ b/arch/riscv/boot/dts/thead/th1520.dtsi
> > @@ -676,6 +676,10 @@ pvt: pvt@fffff4e000 {
> >                         reg-names = "common", "ts", "pd", "vm";
> >                         clocks = <&aonsys_clk>;
> >                         #thermal-sensor-cells = <1>;
> > +                       moortec,ts-coeff-g = <42740>;
> > +                       moortec,ts-coeff-h = <220500>;
> > +                       moortec,ts-coeff-j = <(-160)>;
> > +                       moortec,ts-coeff-cal5 = <4094>;
> >                 };
> >  
> >                 gpio@fffff52000 {
> > -- 
> > 2.50.1
> > 
> 
> I think moortec,ts-coeff-XXX will need to be rounded to nearest
> multiple
> of 100 as dtbs_check warns that:
> 
> pvt@fffff4e000: moortec,ts-coeff-g: 42740 is not a multiple of 100
>         from schema $id:
> http://devicetree.org/schemas/hwmon/moortec,mr75203.yaml#
> pvt@fffff4e000: moortec,ts-coeff-j: -160 is not a multiple of 100
>         from schema $id:
> http://devicetree.org/schemas/hwmon/moortec,mr75203.yaml#
> pvt@fffff4e000: moortec,ts-coeff-g: 42740 is not a multiple of 100
>         from schema $id:
> http://devicetree.org/schemas/hwmon/moortec,mr75203.yaml#
> pvt@fffff4e000: moortec,ts-coeff-j: -160 is not a multiple of 100
>         from schema $id:
> http://devicetree.org/schemas/hwmon/moortec,mr75203.yaml#

Then it looks like the binding is to be blamed for not allowing fine
tweak.

> 
> Thanks,
> Drew


  reply	other threads:[~2025-08-23 14:37 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-08-16  9:32 [PATCH 0/3] Initial thermal management for Lichee Pi 4A board Icenowy Zheng
2025-08-16  9:32 ` [PATCH 1/3] riscv: dts: thead: th1520: add coefficients to the PVT node Icenowy Zheng
2025-08-22 21:29   ` Drew Fustini
2025-08-23 14:37     ` Icenowy Zheng [this message]
2025-08-16  9:32 ` [PATCH 2/3] riscv: dts: thead: th1520: add initial thermal zones Icenowy Zheng
2025-08-16  9:32 ` [PATCH 3/3] riscv: dts: thead: th1520: add soft PWM fan for Lichee Pi 4A Icenowy Zheng
2025-08-16 23:27   ` Drew Fustini
2025-08-22 21:32   ` Drew Fustini
2025-08-23  5:45     ` Icenowy Zheng
2025-08-16 23:40 ` [PATCH 0/3] Initial thermal management for Lichee Pi 4A board Drew Fustini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6ac480db63aff3c59603db16e00b9c7b6580b663.camel@icenowy.me \
    --to=uwu@icenowy.me \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=fustini@kernel.org \
    --cc=guoren@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=rabenda.cn@gmail.com \
    --cc=robh@kernel.org \
    --cc=wefu@redhat.com \
    --cc=ziyao@disroot.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).