Re: [PATCH v7 2/8] dt-bindings: iio: dac: adi-axi-dac: add ad3552r axi variant

["Nuno Sá" <noname.nuno@gmail.com>]

On Thu, 2024-10-24 at 11:28 +0200, Angelo Dureghello wrote:
> Hi Conor,
> 
> On 22.10.2024 18:22, Conor Dooley wrote:
> > On Mon, Oct 21, 2024 at 02:40:12PM +0200, Angelo Dureghello wrote:
> > > From: Angelo Dureghello <adureghello@baylibre.com>
> > > 
> > > Add a new compatible and related bindigns for the fpga-based
> > > "ad3552r" AXI IP core, a variant of the generic AXI DAC IP.
> > > 
> > > The AXI "ad3552r" IP is a very similar HDL (fpga) variant of the
> > > generic AXI "DAC" IP, intended to control ad3552r and similar chips,
> > > mainly to reach high speed transfer rates using a QSPI DDR
> > > (dobule-data-rate) interface.
> > > 
> > > The ad3552r device is defined as a child of the AXI DAC, that in
> > > this case is acting as an SPI controller.
> > > 
> > > Note, #io-backend is present because it is possible (in theory anyway)
> > > to use a separate controller for the control path than that used
> > > for the datapath.
> > > 
> > > Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
> > > ---
> > >  .../devicetree/bindings/iio/dac/adi,axi-dac.yaml   | 69 +++++++++++++++++++++-
> > >  1 file changed, 66 insertions(+), 3 deletions(-)
> > > 
> > > diff --git a/Documentation/devicetree/bindings/iio/dac/adi,axi-dac.yaml
> > > b/Documentation/devicetree/bindings/iio/dac/adi,axi-dac.yaml
> > > index a55e9bfc66d7..0aabb210f26d 100644
> > > --- a/Documentation/devicetree/bindings/iio/dac/adi,axi-dac.yaml
> > > +++ b/Documentation/devicetree/bindings/iio/dac/adi,axi-dac.yaml
> > > @@ -19,11 +19,13 @@ description: |
> > >    memory via DMA into the DAC.
> > >  
> > >    https://wiki.analog.com/resources/fpga/docs/axi_dac_ip
> > > +  https://analogdevicesinc.github.io/hdl/library/axi_ad3552r/index.html
> > >  
> > >  properties:
> > >    compatible:
> > >      enum:
> > >        - adi,axi-dac-9.1.b
> > > +      - adi,axi-ad3552r
> > >  
> > >    reg:
> > >      maxItems: 1
> > > @@ -36,7 +38,12 @@ properties:
> > >        - const: tx
> > >  
> > >    clocks:
> > > -    maxItems: 1
> > > +    minItems: 1
> > > +    maxItems: 2
> > > +
> > > +  clock-names:
> > > +    minItems: 1
> > > +    maxItems: 2
> > >  
> > >    '#io-backend-cells':
> > >      const: 0
> > > @@ -47,7 +54,31 @@ required:
> > >    - reg
> > >    - clocks
> > >  
> > > -additionalProperties: false
> > > +allOf:
> > > +  - if:
> > > +      properties:
> > > +        compatible:
> > > +          contains:
> > > +            const: adi,axi-ad3552r
> > > +    then:
> > > +      $ref: /schemas/spi/spi-controller.yaml#
> > > +      properties:
> > > +        clocks:
> > > +          minItems: 2
> > > +          maxItems: 2
> > 
> > Is this maxItems required? It matches the outer maximum.
> > 
> > > +        clock-names:
> > > +          items:
> > > +            - const: s_axi_aclk
> > > +            - const: dac_clk
> > 
> > The names are the same in both cases, you can move the definitions
> > outside of the if/then/else stuff and only constrain it here.
> > 
> thanks, could you maybe have a look if it's ok now ?
> (maxItems not needed for a const list)
> 
>   clocks:
>     minItems: 1
>     maxItems: 2
> 
>   clock-names:
>     items:
>       - const: s_axi_aclk
>       - const: dac_clk
>     minItems: 1
> 
>   '#io-backend-cells':
>     const: 0
> 
> required:
>   - compatible
>   - dmas
>   - reg
>   - clocks
> 
> allOf:
>   - if:
>       properties:
>         compatible:
>           contains:
>             const: adi,axi-ad3552r
>     then:
>       $ref: /schemas/spi/spi-controller.yaml#
>       properties:
>         clocks:
>           minItems: 2
>         clock-names:
>           minItems: 2
>     else:
>       properties:
>         clocks:
>           maxItems: 1
>         clock-names:
>           maxItems: 1

I guess in this case it could even be clock-names: false. One does not make much
sense.

- Nuno Sá