* [PATCH V9 3/4] of: unittest: Create overlay_common.dtsi and testcases_common.dtsi
2021-03-03 4:36 [PATCH V9 0/4] dt: Add fdtoverlay rule and statically build unittest Viresh Kumar
@ 2021-03-03 4:36 ` Viresh Kumar
2021-03-03 4:36 ` [PATCH V9 4/4] of: unittest: Statically apply overlays using fdtoverlay Viresh Kumar
1 sibling, 0 replies; 3+ messages in thread
From: Viresh Kumar @ 2021-03-03 4:36 UTC (permalink / raw)
To: Masahiro Yamada, Rob Herring, Frank Rowand
Cc: Viresh Kumar, Vincent Guittot, David Gibson, Michal Simek,
Geert Uytterhoeven, anmar.oueja, Bill Mills, Michal Marek,
linux-kernel, devicetree
In order to build-test the same unit-test files using fdtoverlay tool,
move the device nodes from the existing overlay_base.dts and
testcases_common.dts files to .dtsi counterparts. The .dts files now
include the new .dtsi files, resulting in exactly the same behavior as
earlier.
The .dtsi files can now be reused for compile time tests using
fdtoverlay (will be done by a later commit).
This is required because the base files passed to fdtoverlay tool
shouldn't be overlays themselves (i.e. shouldn't have the /plugin/;
tag).
Note that this commit also moves "testcase-device2" node to
testcases.dts from tests-interrupts.dtsi, as this node has a deliberate
error in it and is only relevant for runtime testing done with
unittest.c.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
drivers/of/unittest-data/overlay_base.dts | 90 +-----------------
drivers/of/unittest-data/overlay_common.dtsi | 91 +++++++++++++++++++
drivers/of/unittest-data/testcases.dts | 23 ++---
.../of/unittest-data/testcases_common.dtsi | 19 ++++
.../of/unittest-data/tests-interrupts.dtsi | 11 +--
5 files changed, 128 insertions(+), 106 deletions(-)
create mode 100644 drivers/of/unittest-data/overlay_common.dtsi
create mode 100644 drivers/of/unittest-data/testcases_common.dtsi
diff --git a/drivers/of/unittest-data/overlay_base.dts b/drivers/of/unittest-data/overlay_base.dts
index 99ab9d12d00b..ab9014589c5d 100644
--- a/drivers/of/unittest-data/overlay_base.dts
+++ b/drivers/of/unittest-data/overlay_base.dts
@@ -2,92 +2,4 @@
/dts-v1/;
/plugin/;
-/*
- * Base device tree that overlays will be applied against.
- *
- * Do not add any properties in node "/".
- * Do not add any nodes other than "/testcase-data-2" in node "/".
- * Do not add anything that would result in dtc creating node "/__fixups__".
- * dtc will create nodes "/__symbols__" and "/__local_fixups__".
- */
-
-/ {
- testcase-data-2 {
- #address-cells = <1>;
- #size-cells = <1>;
-
- electric_1: substation@100 {
- compatible = "ot,big-volts-control";
- reg = < 0x00000100 0x100 >;
- status = "disabled";
-
- hvac_1: hvac-medium-1 {
- compatible = "ot,hvac-medium";
- heat-range = < 50 75 >;
- cool-range = < 60 80 >;
- };
-
- spin_ctrl_1: motor-1 {
- compatible = "ot,ferris-wheel-motor";
- spin = "clockwise";
- rpm_avail = < 50 >;
- };
-
- spin_ctrl_2: motor-8 {
- compatible = "ot,roller-coaster-motor";
- };
- };
-
- rides_1: fairway-1 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "ot,rides";
- status = "disabled";
- orientation = < 127 >;
-
- ride@100 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "ot,roller-coaster";
- reg = < 0x00000100 0x100 >;
- hvac-provider = < &hvac_1 >;
- hvac-thermostat = < 29 > ;
- hvac-zones = < 14 >;
- hvac-zone-names = "operator";
- spin-controller = < &spin_ctrl_2 5 &spin_ctrl_2 7 >;
- spin-controller-names = "track_1", "track_2";
- queues = < 2 >;
-
- track@30 {
- reg = < 0x00000030 0x10 >;
- };
-
- track@40 {
- reg = < 0x00000040 0x10 >;
- };
-
- };
- };
-
- lights_1: lights@30000 {
- compatible = "ot,work-lights";
- reg = < 0x00030000 0x1000 >;
- status = "disabled";
- };
-
- lights_2: lights@40000 {
- compatible = "ot,show-lights";
- reg = < 0x00040000 0x1000 >;
- status = "disabled";
- rate = < 13 138 >;
- };
-
- retail_1: vending@50000 {
- reg = < 0x00050000 0x1000 >;
- compatible = "ot,tickets";
- status = "disabled";
- };
-
- };
-};
-
+#include "overlay_common.dtsi"
diff --git a/drivers/of/unittest-data/overlay_common.dtsi b/drivers/of/unittest-data/overlay_common.dtsi
new file mode 100644
index 000000000000..08874a72556e
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_common.dtsi
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * Base device tree that overlays will be applied against.
+ *
+ * Do not add any properties in node "/".
+ * Do not add any nodes other than "/testcase-data-2" in node "/".
+ * Do not add anything that would result in dtc creating node "/__fixups__".
+ * dtc will create nodes "/__symbols__" and "/__local_fixups__".
+ */
+
+/ {
+ testcase-data-2 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ electric_1: substation@100 {
+ compatible = "ot,big-volts-control";
+ reg = < 0x00000100 0x100 >;
+ status = "disabled";
+
+ hvac_1: hvac-medium-1 {
+ compatible = "ot,hvac-medium";
+ heat-range = < 50 75 >;
+ cool-range = < 60 80 >;
+ };
+
+ spin_ctrl_1: motor-1 {
+ compatible = "ot,ferris-wheel-motor";
+ spin = "clockwise";
+ rpm_avail = < 50 >;
+ };
+
+ spin_ctrl_2: motor-8 {
+ compatible = "ot,roller-coaster-motor";
+ };
+ };
+
+ rides_1: fairway-1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ot,rides";
+ status = "disabled";
+ orientation = < 127 >;
+
+ ride@100 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ot,roller-coaster";
+ reg = < 0x00000100 0x100 >;
+ hvac-provider = < &hvac_1 >;
+ hvac-thermostat = < 29 > ;
+ hvac-zones = < 14 >;
+ hvac-zone-names = "operator";
+ spin-controller = < &spin_ctrl_2 5 &spin_ctrl_2 7 >;
+ spin-controller-names = "track_1", "track_2";
+ queues = < 2 >;
+
+ track@30 {
+ reg = < 0x00000030 0x10 >;
+ };
+
+ track@40 {
+ reg = < 0x00000040 0x10 >;
+ };
+
+ };
+ };
+
+ lights_1: lights@30000 {
+ compatible = "ot,work-lights";
+ reg = < 0x00030000 0x1000 >;
+ status = "disabled";
+ };
+
+ lights_2: lights@40000 {
+ compatible = "ot,show-lights";
+ reg = < 0x00040000 0x1000 >;
+ status = "disabled";
+ rate = < 13 138 >;
+ };
+
+ retail_1: vending@50000 {
+ reg = < 0x00050000 0x1000 >;
+ compatible = "ot,tickets";
+ status = "disabled";
+ };
+
+ };
+};
+
diff --git a/drivers/of/unittest-data/testcases.dts b/drivers/of/unittest-data/testcases.dts
index a85b5e1c381a..b80d6009ad7a 100644
--- a/drivers/of/unittest-data/testcases.dts
+++ b/drivers/of/unittest-data/testcases.dts
@@ -2,19 +2,20 @@
/dts-v1/;
/plugin/;
+#include "testcases_common.dtsi"
+
/ {
+ /*
+ * testcase data that intentionally results in an error is located here
+ * instead of in testcases_common.dtsi so that the static overlay apply
+ * tests will not include the error.
+ */
testcase-data {
- changeset {
- prop-update = "hello";
- prop-remove = "world";
- node-remove {
- };
+ testcase-device2 {
+ compatible = "testcase-device";
+ interrupt-parent = <&test_intc2>;
+ interrupts = <1>; /* invalid specifier - too short */
};
};
+
};
-#include "tests-phandle.dtsi"
-#include "tests-interrupts.dtsi"
-#include "tests-match.dtsi"
-#include "tests-address.dtsi"
-#include "tests-platform.dtsi"
-#include "tests-overlay.dtsi"
diff --git a/drivers/of/unittest-data/testcases_common.dtsi b/drivers/of/unittest-data/testcases_common.dtsi
new file mode 100644
index 000000000000..19292bbb4cbb
--- /dev/null
+++ b/drivers/of/unittest-data/testcases_common.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+ testcase-data {
+ changeset {
+ prop-update = "hello";
+ prop-remove = "world";
+ node-remove {
+ };
+ };
+ };
+};
+
+#include "tests-phandle.dtsi"
+#include "tests-interrupts.dtsi"
+#include "tests-match.dtsi"
+#include "tests-address.dtsi"
+#include "tests-platform.dtsi"
+#include "tests-overlay.dtsi"
diff --git a/drivers/of/unittest-data/tests-interrupts.dtsi b/drivers/of/unittest-data/tests-interrupts.dtsi
index ec175e800725..6c58fd61585c 100644
--- a/drivers/of/unittest-data/tests-interrupts.dtsi
+++ b/drivers/of/unittest-data/tests-interrupts.dtsi
@@ -62,11 +62,10 @@ testcase-device1 {
interrupts = <1>;
};
- testcase-device2 {
- compatible = "testcase-device";
- interrupt-parent = <&test_intc2>;
- interrupts = <1>; /* invalid specifier - too short */
- };
+ /*
+ * testcase data that intentionally results in an error is
+ * located in testcases.dts instead of in this file so that the
+ * static overlay apply tests will not include the error.
+ */
};
-
};
--
2.25.0.rc1.19.g042ed3e048af
^ permalink raw reply related [flat|nested] 3+ messages in thread* [PATCH V9 4/4] of: unittest: Statically apply overlays using fdtoverlay
2021-03-03 4:36 [PATCH V9 0/4] dt: Add fdtoverlay rule and statically build unittest Viresh Kumar
2021-03-03 4:36 ` [PATCH V9 3/4] of: unittest: Create overlay_common.dtsi and testcases_common.dtsi Viresh Kumar
@ 2021-03-03 4:36 ` Viresh Kumar
1 sibling, 0 replies; 3+ messages in thread
From: Viresh Kumar @ 2021-03-03 4:36 UTC (permalink / raw)
To: Masahiro Yamada, Rob Herring, Frank Rowand
Cc: Viresh Kumar, Vincent Guittot, David Gibson, Michal Simek,
Geert Uytterhoeven, anmar.oueja, Bill Mills, Michal Marek,
linux-kernel, devicetree
Now that fdtoverlay is part of the kernel build, start using it to test
the unitest overlays we have by applying them statically. Create two new
base files static_base_1.dts and static_base_2.dts which includes other
.dtsi files.
Some unittest overlays deliberately contain errors that unittest checks
for. These overlays will cause fdtoverlay to fail, and are thus not
included for static builds.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
drivers/of/unittest-data/Makefile | 50 ++++++++++++++++++++++
drivers/of/unittest-data/static_base_1.dts | 4 ++
drivers/of/unittest-data/static_base_2.dts | 4 ++
3 files changed, 58 insertions(+)
create mode 100644 drivers/of/unittest-data/static_base_1.dts
create mode 100644 drivers/of/unittest-data/static_base_2.dts
diff --git a/drivers/of/unittest-data/Makefile b/drivers/of/unittest-data/Makefile
index 009f4045c8e4..f88b2f48f172 100644
--- a/drivers/of/unittest-data/Makefile
+++ b/drivers/of/unittest-data/Makefile
@@ -34,7 +34,57 @@ DTC_FLAGS_overlay += -@
DTC_FLAGS_overlay_bad_phandle += -@
DTC_FLAGS_overlay_bad_symbol += -@
DTC_FLAGS_overlay_base += -@
+DTC_FLAGS_static_base_1 += -@
+DTC_FLAGS_static_base_2 += -@
DTC_FLAGS_testcases += -@
# suppress warnings about intentional errors
DTC_FLAGS_testcases += -Wno-interrupts_property
+
+# Apply overlays statically with fdtoverlay. This is a build time test that
+# the overlays can be applied successfully by fdtoverlay. This does not
+# guarantee that the overlays can be applied successfully at run time by
+# unittest, but it provides a bit of build time test coverage for those
+# who do not execute unittest.
+#
+# The overlays are applied on top of static_base_1.dtb and static_base_2.dtb to
+# create static_test_1.dtb and static_test_2.dtb. If fdtoverlay detects an
+# error than the kernel build will fail. static_test_1.dtb and
+# static_test_2.dtb are not consumed by unittest.
+#
+# Some unittest overlays deliberately contain errors that unittest checks for.
+# These overlays will cause fdtoverlay to fail, and are thus not included
+# in the static test:
+# overlay_bad_add_dup_node.dtbo \
+# overlay_bad_add_dup_prop.dtbo \
+# overlay_bad_phandle.dtbo \
+# overlay_bad_symbol.dtbo \
+
+apply_static_overlay_1 := overlay_0.dtbo \
+ overlay_1.dtbo \
+ overlay_2.dtbo \
+ overlay_3.dtbo \
+ overlay_4.dtbo \
+ overlay_5.dtbo \
+ overlay_6.dtbo \
+ overlay_7.dtbo \
+ overlay_8.dtbo \
+ overlay_9.dtbo \
+ overlay_10.dtbo \
+ overlay_11.dtbo \
+ overlay_12.dtbo \
+ overlay_13.dtbo \
+ overlay_15.dtbo \
+ overlay_gpio_01.dtbo \
+ overlay_gpio_02a.dtbo \
+ overlay_gpio_02b.dtbo \
+ overlay_gpio_03.dtbo \
+ overlay_gpio_04a.dtbo \
+ overlay_gpio_04b.dtbo
+
+apply_static_overlay_2 := overlay.dtbo
+
+static_test_1-dtbs := static_base_1.dtb $(apply_static_overlay_1)
+static_test_2-dtbs := static_base_2.dtb $(apply_static_overlay_2)
+
+dtb-$(CONFIG_OF_OVERLAY) += static_test_1.dtb static_test_2.dtb
diff --git a/drivers/of/unittest-data/static_base_1.dts b/drivers/of/unittest-data/static_base_1.dts
new file mode 100644
index 000000000000..10556cb3f01f
--- /dev/null
+++ b/drivers/of/unittest-data/static_base_1.dts
@@ -0,0 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "testcases_common.dtsi"
diff --git a/drivers/of/unittest-data/static_base_2.dts b/drivers/of/unittest-data/static_base_2.dts
new file mode 100644
index 000000000000..b0ea9504d6f3
--- /dev/null
+++ b/drivers/of/unittest-data/static_base_2.dts
@@ -0,0 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "overlay_common.dtsi"
--
2.25.0.rc1.19.g042ed3e048af
^ permalink raw reply related [flat|nested] 3+ messages in thread