From mboxrd@z Thu Jan  1 00:00:00 1970
From: Dmitry Osipenko <digetx@gmail.com>
Subject: Re: [PATCH v1 05/11] dt-bindings: regulator: Change
 regulator-coupled-max-spread property
Date: Wed, 17 Oct 2018 16:32:01 +0300
Message-ID: <6e9e90a1-0580-cc20-f7f9-69fefae0b3dd@gmail.com>
References: <20181005153638.1886-1-digetx@gmail.com>
 <20181005153638.1886-6-digetx@gmail.com> <20181017132501.GA19385@bogus>
Mime-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: 7bit
Return-path: <linux-kernel-owner@vger.kernel.org>
In-Reply-To: <20181017132501.GA19385@bogus>
Content-Language: en-US
Sender: linux-kernel-owner@vger.kernel.org
To: Rob Herring <robh@kernel.org>
Cc: Mark Brown <broonie@kernel.org>, Maciej Purski <m.purski@samsung.com>, Thierry Reding <thierry.reding@gmail.com>, Jonathan Hunter <jonathanh@nvidia.com>, Peter De Schrijver <pdeschrijver@nvidia.com>, Lucas Stach <l.stach@pengutronix.de>, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-tegra@vger.kernel.org, linux-omap@vger.kernel.org
List-Id: devicetree@vger.kernel.org

On 10/17/18 4:25 PM, Rob Herring wrote:
> On Fri, Oct 05, 2018 at 06:36:32PM +0300, Dmitry Osipenko wrote:
>> Redefine binding for regulator-coupled-max-spread property in a way that
>> max-spread values are defined per regulator couple instead of defining
>> single max-spread for the whole group of coupled regulators.
>>
>> With that change the following regulators coupling configuration will be
>> possible:
>>
>> regA: regulatorA {
>> 	regulator-coupled-with = <&regB &regC>;
>> 	regulator-coupled-max-spread = <100000 300000>;
>> };
>>
>> regB: regulatorB {
>> 	regulator-coupled-with = <&regA &regC>;
>> 	regulator-coupled-max-spread = <100000 200000>;
>> };
>>
>> regC: regulatorC {
>> 	regulator-coupled-with = <&regA &regB>;
>> 	regulator-coupled-max-spread = <300000 200000>;
>> };
>>
>> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
>> ---
>>  Documentation/devicetree/bindings/regulator/regulator.txt | 5 +++--
>>  1 file changed, 3 insertions(+), 2 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt
>> index a7cd36877bfe..9b525b657fca 100644
>> --- a/Documentation/devicetree/bindings/regulator/regulator.txt
>> +++ b/Documentation/devicetree/bindings/regulator/regulator.txt
>> @@ -76,8 +76,9 @@ Optional properties:
>>  - regulator-coupled-with: Regulators with which the regulator
>>    is coupled. The linkage is 2-way - all coupled regulators should be linked
>>    with each other. A regulator should not be coupled with its supplier.
>> -- regulator-coupled-max-spread: Max spread between voltages of coupled regulators
>> -  in microvolts.
>> +- regulator-coupled-max-spread: Array of maximum spread between voltages of
>> +  coupled regulators in microvolts, each value in the array relates to the
>> +  corresponding couple specified by the regulator-coupled-with property.
> 
> Is this in use already? How is a single entry handled?

No, it is not in use yet. Only some of the prerequisite patches were applied. 

Initially single entry was supposed to be re-used by all of regulator couples. Now single entry describes a single couple only.