devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH] greatlakes: dts: Add Facebook greatlakes (AST2600) BMC
@ 2022-09-15  7:23 Bonnie Lo
  2022-09-17 16:57 ` Krzysztof Kozlowski
  0 siblings, 1 reply; 6+ messages in thread
From: Bonnie Lo @ 2022-09-15  7:23 UTC (permalink / raw)
  To: joel
  Cc: patrickw3, garnermic, Delphine_Chiu, Bonnie_Lo, Bonnie Lo,
	Arnd Bergmann, Olof Johansson, soc, Rob Herring,
	Krzysztof Kozlowski, Andrew Jeffery, linux-arm-kernel, devicetree,
	linux-kernel, linux-aspeed

From: Bonnie Lo <Bonnie_Lo@wiwynn.com>

Add linux device tree entry related to
greatlakes specific devices connected to BMC SoC.

Signed-off-by: Bonnie Lo <Bonnie_Lo@wiwynn.com>
---
 arch/arm/boot/dts/Makefile                    |   1 +
 .../dts/aspeed-bmc-facebook-greatlakes.dts    | 248 ++++++++++++++++++
 2 files changed, 249 insertions(+)
 create mode 100644 arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 05d8aef6e5d2..40fa906ab17f 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1580,6 +1580,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
        aspeed-bmc-asrock-e3c246d4i.dtb \
        aspeed-bmc-asrock-romed8hm3.dtb \
        aspeed-bmc-bytedance-g220a.dtb \
+       aspeed-bmc-facebook-greatlakes.dtb \
        aspeed-bmc-facebook-bletchley.dtb \
        aspeed-bmc-facebook-cloudripper.dtb \
        aspeed-bmc-facebook-cmm.dtb \
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts
new file mode 100644
index 000000000000..f011cc4d370f
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts
@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2022 Facebook Inc.
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+       model = "AST2600 EVB";
+       compatible = "aspeed,ast2600";
+
+       aliases {
+               serial4 = &uart5;
+       };
+
+       chosen {
+               stdout-path = &uart5;
+               bootargs = "console=ttyS4,57600n8 root=/dev/ram rw vmalloc=384M";
+       };
+
+       memory@80000000 {
+               device_type = "memory";
+               reg = <0x80000000 0x80000000>;
+       };
+
+       iio-hwmon {
+               compatible = "iio-hwmon";
+               io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+                               <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+                               <&adc1 0>, <&adc1 2>, <&adc1 3>, <&adc1 4>,
+                               <&adc1 5>, <&adc1 6>;
+       };
+};
+
+&uart1 {
+       status = "okay";
+};
+
+&uart2 {
+       status = "okay";
+};
+
+&uart3 {
+       status = "okay";
+};
+
+&uart4 {
+       status = "okay";
+};
+
+&uart5 {
+       status = "okay";
+};
+
+&wdt1 {
+       status = "okay";
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_wdtrst1_default>;
+       aspeed,reset-type = "soc";
+       aspeed,external-signal;
+       aspeed,ext-push-pull;
+       aspeed,ext-active-high;
+       aspeed,ext-pulse-duration = <256>;
+};
+
+&mac3 {
+       status = "okay";
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_rmii4_default>;
+       no-hw-checksum;
+       use-ncsi;
+       mlx,multi-host;
+       ncsi-ctrl,start-redo-probe;
+       ncsi-ctrl,no-channel-monitor;
+       ncsi-package = <1>;
+       ncsi-channel = <1>;
+       ncsi-rexmit = <1>;
+       ncsi-timeout = <2>;
+};
+
+&rtc {
+       status = "okay";
+};
+
+&fmc {
+       status = "okay";
+       flash@0 {
+               status = "okay";
+               m25p,fast-read;
+               label = "bmc";
+               spi-rx-bus-width = <4>;
+               spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+       };
+       flash@1 {
+               status = "okay";
+               m25p,fast-read;
+               label = "bmc2";
+               spi-rx-bus-width = <4>;
+               spi-max-frequency = <50000000>;
+       };
+};
+
+&i2c0 {
+       status = "okay";
+       multi-master;
+       ipmb0@10 {
+               compatible = "ipmb-dev";
+               reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+               i2c-protocol;
+       };
+};
+
+&i2c1 {
+       status = "okay";
+       multi-master;
+       ipmb1@10 {
+               compatible = "ipmb-dev";
+               reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+               i2c-protocol;
+       };
+};
+
+&i2c2 {
+       status = "okay";
+       multi-master;
+       ipmb2@10 {
+               compatible = "ipmb-dev";
+               reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+               i2c-protocol;
+       };
+};
+
+&i2c3 {
+       status = "okay";
+       multi-master;
+       ipmb3@10 {
+               compatible = "ipmb-dev";
+               reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+               i2c-protocol;
+       };
+};
+
+&i2c4 {
+       status = "okay";
+};
+
+&i2c5 {
+       status = "okay";
+};
+
+&i2c6 {
+       status = "okay";
+};
+
+&i2c7 {
+       status = "okay";
+};
+
+&i2c8 {
+       status = "okay";
+       tmp421@1f {
+               compatible = "ti,tmp421";
+               reg = <0x1f>;
+       };
+       // NIC EEPROM
+       eeprom@50 {
+               compatible = "st,24c32";
+               reg = <0x50>;
+       };
+};
+
+&i2c9 {
+       status = "okay";
+       multi-master;
+       ipmb9@10 {
+               compatible = "ipmb-dev";
+               reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+               i2c-protocol;
+       };
+};
+
+&i2c10 {
+       status = "okay";
+};
+
+&i2c11 {
+       status = "okay";
+       eeprom@51 {
+               compatible = "atmel,24c128";
+               reg = <0x51>;
+       };
+       eeprom@54 {
+               compatible = "atmel,24c128";
+               reg = <0x54>;
+       };
+};
+
+&i2c12 {
+       status = "okay";
+       lm75@4f {
+               compatible = "lm75";
+               reg = <0x4f>;
+       };
+};
+
+&i2c13 {
+       status = "okay";
+};
+
+&adc0 {
+       ref_voltage = <2500>;
+       status = "okay";
+       pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+                       &pinctrl_adc2_default &pinctrl_adc3_default
+                       &pinctrl_adc4_default &pinctrl_adc5_default
+                       &pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+       ref_voltage = <2500>;
+       status = "okay";
+       pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc10_default
+                       &pinctrl_adc11_default &pinctrl_adc12_default
+                       &pinctrl_adc13_default &pinctrl_adc14_default>;
+};
+
+
+&ehci0 {
+       status = "okay";
+};
+
+&ehci1 {
+       status = "okay";
+};
+
+&uhci {
+       status = "okay";
+};
+
+&gpio0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_gpiu1_default &pinctrl_gpiu7_default>;
+};
+
+
--
2.17.1

WIWYNN PROPRIETARY This email (and any attachments) contains proprietary or confidential information and is for the sole use of its intended recipient. Any unauthorized review, use, copying or distribution of this email or the content of this email is strictly prohibited. If you are not the intended recipient, please notify the sender and delete this email immediately.

^ permalink raw reply related	[flat|nested] 6+ messages in thread
end of thread, other threads:[~2022-10-05 15:03 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-09-15  7:23 [PATCH] greatlakes: dts: Add Facebook greatlakes (AST2600) BMC Bonnie Lo
2022-09-17 16:57 ` Krzysztof Kozlowski
2022-09-20  7:45   ` Bonnie Lo/WYHQ/Wiwynn
2022-09-20  8:24     ` Krzysztof Kozlowski
2022-10-05  8:43       ` Delphine_CC_Chiu/WYHQ/Wiwynn
2022-10-05 15:02         ` Krzysztof Kozlowski

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).