[PATCH v7 0/3] Add i.MX91/93 parallel display support

[PATCH v7 0/3] Add i.MX91/93 parallel display support

[Marco Felsch]

Hi,

this patchset adds the driver, dt-bindings and dt integration required
to drive a parallel display on the i.MX93.

Since the i.MX91 register layout equals the one from the i.MX93, I added
the support for both but tested only the i.MX93 use-case.

This patchset depends on:
 - https://lore.kernel.org/all/20251201-v6-18-topic-imx93-blkctrl-v1-0-b57a72e60105@pengutronix.de/

@Conor Dooley
I dropped your r-b tag since I added the 'bus-width' property.

Regards,
  Marco

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
---
Changes in v7:
- Link to v6: https://lore.kernel.org/r/20251201-v6-18-topic-imx93-parallel-display-v6-0-7b056e1e5b1e@pengutronix.de
- Add missing bits.h and bitfield.h headers (lkp)

Changes in v6:
- Link to v5: https://lore.kernel.org/all/20250304082434.834031-1-victor.liu@nxp.com/
- Add bus-width support
- rebase onto v6.18-rc1
- add review feedback (Alexander)
- driver license "GPL v2" -> "GPL" (checkpatch)
- make use of reg of-property
- fix to short Kconfig description (checkpath)
- add OF integration

---
Liu Ying (2):
      dt-bindings: soc: imx93-media-blk-ctrl: Add PDFC subnode to schema and example
      drm/bridge: imx: Add i.MX93 parallel display format configuration support

Marco Felsch (1):
      arm64: dts: imx93: Add parallel display output nodes

 .../bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml |  92 +++++++++
 arch/arm64/boot/dts/freescale/imx91_93_common.dtsi |  57 ++++++
 arch/arm64/boot/dts/freescale/imx93.dtsi           |  12 ++
 drivers/gpu/drm/bridge/imx/Kconfig                 |  11 +
 drivers/gpu/drm/bridge/imx/Makefile                |   1 +
 drivers/gpu/drm/bridge/imx/imx93-pdfc.c            | 227 +++++++++++++++++++++
 6 files changed, 400 insertions(+)
---
base-commit: 3a8660878839faadb4f1a6dd72c3179c1df56787
change-id: 20251201-v6-18-topic-imx93-parallel-display-95f9234bf6cc

Best regards,
-- 
Marco Felsch <m.felsch@pengutronix.de>

[PATCH v7 1/3] dt-bindings: soc: imx93-media-blk-ctrl: Add PDFC subnode to schema and example

[Marco Felsch]

From: Liu Ying <victor.liu@nxp.com>

i.MX93 SoC mediamix blk-ctrl contains one DISPLAY_MUX register which
configures parallel display format by using the "PARALLEL_DISP_FORMAT"
field. Document the Parallel Display Format Configuration(PDFC) subnode
and add the subnode to example.

Signed-off-by: Liu Ying <victor.liu@nxp.com>
[m.felsch@pengutronix.de: port to v6.18-rc1]
[m.felsch@pengutronix.de: add bus-width]
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
---
 .../bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml | 92 ++++++++++++++++++++++
 1 file changed, 92 insertions(+)

diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
index 34aea58094e55365a2f9c86092f637e533f954ff..6e2d86d9341c75108b492bcbabc8a560d8e707cd 100644
--- a/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
+++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
@@ -26,6 +26,12 @@ properties:
   reg:
     maxItems: 1
 
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
   '#power-domain-cells':
     const: 1
 
@@ -40,6 +46,60 @@ properties:
     minItems: 8
     maxItems: 10
 
+  bridge@60:
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: nxp,imx93-pdfc
+
+      reg:
+        maxItems: 1
+
+      ports:
+        $ref: /schemas/graph.yaml#/properties/ports
+
+        properties:
+          port@0:
+            $ref: /schemas/graph.yaml#/properties/port
+            description: Input port node to receive pixel data.
+
+          port@1:
+            $ref: /schemas/graph.yaml#/$defs/port-base
+            unevaluatedProperties: false
+            description: Output port node to downstream pixel data receivers.
+
+            properties:
+              endpoint:
+                $ref: /schemas/graph.yaml#/$defs/endpoint-base
+                unevaluatedProperties: false
+
+                properties:
+                  bus-width:
+                    enum: [ 16, 18, 24 ]
+                    description:
+                      Specify the physical parallel bus width.
+
+                      This property is optional if the display bus-width
+                      matches the SoC bus-width, e.g. a 18-bit RGB666 (display)
+                      is connected and all 18-bit data lanes are muxed to the
+                      parallel-output pads.
+
+                      This property must be set to 18 to cut only the LSBs
+                      instead of the MSBs in case a 24-bit RGB888 display is
+                      connected and only the lower 18-bit data lanes are muxed
+                      to the parallel-output pads.
+
+        required:
+          - port@0
+          - port@1
+
+    required:
+      - compatible
+      - reg
+      - ports
+
 allOf:
   - if:
       properties:
@@ -81,9 +141,12 @@ allOf:
             - const: isi
             - const: csi
             - const: dsi
+
 required:
   - compatible
   - reg
+  - '#address-cells'
+  - '#size-cells'
   - power-domains
   - clocks
   - clock-names
@@ -112,4 +175,33 @@ examples:
                clock-names = "apb", "axi", "nic", "disp", "cam",
                              "pxp", "lcdif", "isi", "csi", "dsi";
       #power-domain-cells = <1>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      bridge@60 {
+        compatible = "nxp,imx93-pdfc";
+        reg = <0x60 0x4>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+
+            pdfc_from_lcdif: endpoint {
+              remote-endpoint = <&lcdif_to_pdfc>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+
+            pdfc_to_panel: endpoint {
+              remote-endpoint = <&panel_from_pdfc>;
+              bus-width = <18>;
+            };
+          };
+        };
+      };
     };

-- 
2.47.3

[PATCH v7 2/3] drm/bridge: imx: Add i.MX93 parallel display format configuration support

[Marco Felsch]

From: Liu Ying <victor.liu@nxp.com>

NXP i.MX93 mediamix blk-ctrl contains one DISPLAY_MUX register which
configures parallel display format by using the "PARALLEL_DISP_FORMAT"
field. Add a DRM bridge driver to support the display format configuration.

Signed-off-by: Liu Ying <victor.liu@nxp.com>
[m.felsch@pengutronix.de: port to v6.18-rc1]
[m.felsch@pengutronix.de: add review feedback (Alexander)]
[m.felsch@pengutronix.de: fix to short Kconfig description (checkpath)]
[m.felsch@pengutronix.de: use "GPL" instead of "GPL v2" (checkpatch)]
[m.felsch@pengutronix.de: make use of reg property]
[m.felsch@pengutronix.de: add bus-width support]
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
---
 drivers/gpu/drm/bridge/imx/Kconfig      |  11 ++
 drivers/gpu/drm/bridge/imx/Makefile     |   1 +
 drivers/gpu/drm/bridge/imx/imx93-pdfc.c | 227 ++++++++++++++++++++++++++++++++
 3 files changed, 239 insertions(+)

diff --git a/drivers/gpu/drm/bridge/imx/Kconfig b/drivers/gpu/drm/bridge/imx/Kconfig
index 9a480c6abb856276df9b71d23b39a43b3a9c542d..28fd7a00473a0ec50bf0ffb5d50972abc209ceec 100644
--- a/drivers/gpu/drm/bridge/imx/Kconfig
+++ b/drivers/gpu/drm/bridge/imx/Kconfig
@@ -88,4 +88,15 @@ config DRM_IMX93_MIPI_DSI
 	  Choose this to enable MIPI DSI controller found in Freescale i.MX93
 	  processor.
 
+config DRM_IMX93_PARALLEL_DISP_FMT_CONFIG
+	tristate "NXP i.MX91/i.MX93 parallel display format configuration"
+	depends on OF
+	select DRM_KMS_HELPER
+	help
+	  On i.MX93 and i.MX91 SoCs the parallel display format output is
+	  controlled via the MEDIAMIX BLK-CTRL DISPLAY_MUX.
+
+	  Say 'Y' or 'M' if you use the parallel display output path on a
+	  i.MX93 or i.MX91 SoC.
+
 endif # ARCH_MXC || COMPILE_TEST
diff --git a/drivers/gpu/drm/bridge/imx/Makefile b/drivers/gpu/drm/bridge/imx/Makefile
index dd5d4858480663bade98bd58039d1cb6f8aa18da..f4ccc5cbef72a576443d5fecf666b76dfba8aa94 100644
--- a/drivers/gpu/drm/bridge/imx/Makefile
+++ b/drivers/gpu/drm/bridge/imx/Makefile
@@ -8,3 +8,4 @@ obj-$(CONFIG_DRM_IMX8QXP_PIXEL_COMBINER) += imx8qxp-pixel-combiner.o
 obj-$(CONFIG_DRM_IMX8QXP_PIXEL_LINK) += imx8qxp-pixel-link.o
 obj-$(CONFIG_DRM_IMX8QXP_PIXEL_LINK_TO_DPI) += imx8qxp-pxl2dpi.o
 obj-$(CONFIG_DRM_IMX93_MIPI_DSI) += imx93-mipi-dsi.o
+obj-$(CONFIG_DRM_IMX93_PARALLEL_DISP_FMT_CONFIG) += imx93-pdfc.o
diff --git a/drivers/gpu/drm/bridge/imx/imx93-pdfc.c b/drivers/gpu/drm/bridge/imx/imx93-pdfc.c
new file mode 100644
index 0000000000000000000000000000000000000000..624389def0ac3f24158edc64a8913375a4cc2f12
--- /dev/null
+++ b/drivers/gpu/drm/bridge/imx/imx93-pdfc.c
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/*
+ * Copyright 2022-2025 NXP
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/media-bus-format.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_graph.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <drm/drm_atomic_state_helper.h>
+#include <drm/drm_bridge.h>
+#include <drm/drm_print.h>
+
+#define PARALLEL_DISP_FORMAT		GENMASK(10, 8)
+#define FORMAT_RGB888_TO_RGB888		FIELD_PREP(PARALLEL_DISP_FORMAT, 0)
+#define FORMAT_RGB888_TO_RGB666		FIELD_PREP(PARALLEL_DISP_FORMAT, 1)
+#define FORMAT_RGB565_TO_RGB565		FIELD_PREP(PARALLEL_DISP_FORMAT, 2)
+
+struct imx93_pdfc {
+	struct drm_bridge bridge;
+	struct drm_bridge *next_bridge;
+	struct device *dev;
+	struct regmap *regmap;
+	u64 disp_mux_reg_off;
+	u32 phy_bus_width;
+};
+
+static int
+imx93_pdfc_bridge_attach(struct drm_bridge *bridge, struct drm_encoder *encoder,
+			 enum drm_bridge_attach_flags flags)
+{
+	struct imx93_pdfc *pdfc = bridge->driver_private;
+
+	return drm_bridge_attach(bridge->encoder, pdfc->next_bridge, bridge, flags);
+}
+
+static void imx93_pdfc_bridge_atomic_enable(struct drm_bridge *bridge,
+					    struct drm_atomic_state *state)
+{
+	struct imx93_pdfc *pdfc = bridge->driver_private;
+	const struct drm_bridge_state *bridge_state;
+	unsigned int mask = PARALLEL_DISP_FORMAT;
+	unsigned int val;
+
+	bridge_state = drm_atomic_get_new_bridge_state(state, bridge);
+
+	switch (bridge_state->output_bus_cfg.format) {
+	case MEDIA_BUS_FMT_RGB888_1X24:
+		val = FORMAT_RGB888_TO_RGB888;
+		if (pdfc->phy_bus_width == 18) {
+			/*
+			 * Can be valid if physical bus limitation exist,
+			 * therefore use dev_dbg().
+			 */
+			dev_dbg(pdfc->dev, "Truncate two LSBs from each color\n");
+			val = FORMAT_RGB888_TO_RGB666;
+		}
+		break;
+	case MEDIA_BUS_FMT_RGB666_1X18:
+		val = FORMAT_RGB888_TO_RGB666;
+		break;
+	case MEDIA_BUS_FMT_RGB565_1X16:
+		val = FORMAT_RGB565_TO_RGB565;
+		break;
+	}
+
+	regmap_update_bits(pdfc->regmap, pdfc->disp_mux_reg_off, mask, val);
+}
+
+static const u32 imx93_pdfc_bus_output_fmts[] = {
+	MEDIA_BUS_FMT_RGB888_1X24,
+	MEDIA_BUS_FMT_RGB666_1X18,
+	MEDIA_BUS_FMT_RGB565_1X16,
+	MEDIA_BUS_FMT_FIXED
+};
+
+static bool imx93_pdfc_bus_output_fmt_supported(u32 fmt)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(imx93_pdfc_bus_output_fmts); i++) {
+		if (imx93_pdfc_bus_output_fmts[i] == fmt)
+			return true;
+	}
+
+	return false;
+}
+
+static u32 *
+imx93_pdfc_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
+					    struct drm_bridge_state *bridge_state,
+					    struct drm_crtc_state *crtc_state,
+					    struct drm_connector_state *conn_state,
+					    u32 output_fmt,
+					    unsigned int *num_input_fmts)
+{
+	u32 *input_fmts;
+
+	*num_input_fmts = 0;
+
+	if (!imx93_pdfc_bus_output_fmt_supported(output_fmt))
+		return NULL;
+
+	input_fmts = kmalloc(sizeof(*input_fmts), GFP_KERNEL);
+	if (!input_fmts)
+		return NULL;
+
+	switch (output_fmt) {
+	case MEDIA_BUS_FMT_RGB888_1X24:
+	case MEDIA_BUS_FMT_RGB565_1X16:
+		input_fmts[0] = output_fmt;
+		break;
+	case MEDIA_BUS_FMT_RGB666_1X18:
+	case MEDIA_BUS_FMT_FIXED:
+		input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X24;
+		break;
+	}
+
+	*num_input_fmts = 1;
+
+	return input_fmts;
+}
+
+static int imx93_pdfc_bridge_atomic_check(struct drm_bridge *bridge,
+					  struct drm_bridge_state *bridge_state,
+					  struct drm_crtc_state *crtc_state,
+					  struct drm_connector_state *conn_state)
+{
+	struct imx93_pdfc *pdfc = bridge->driver_private;
+
+	switch (bridge_state->output_bus_cfg.format) {
+	case MEDIA_BUS_FMT_RGB888_1X24:
+	case MEDIA_BUS_FMT_RGB666_1X18:
+	case MEDIA_BUS_FMT_RGB565_1X16:
+		return 0;
+	default:
+		dev_warn(pdfc->dev, "Unsupported output bus format: 0x%x\n",
+			 bridge_state->output_bus_cfg.format);
+		return -EINVAL;
+	}
+}
+
+static const struct drm_bridge_funcs funcs = {
+	.attach			= imx93_pdfc_bridge_attach,
+	.atomic_enable		= imx93_pdfc_bridge_atomic_enable,
+	.atomic_duplicate_state	= drm_atomic_helper_bridge_duplicate_state,
+	.atomic_destroy_state	= drm_atomic_helper_bridge_destroy_state,
+	.atomic_get_input_bus_fmts	= imx93_pdfc_bridge_atomic_get_input_bus_fmts,
+	.atomic_check		= imx93_pdfc_bridge_atomic_check,
+	.atomic_reset		= drm_atomic_helper_bridge_reset,
+};
+
+static int imx93_pdfc_bridge_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct imx93_pdfc *pdfc;
+	struct device_node *ep;
+	int err;
+
+	pdfc = devm_drm_bridge_alloc(dev, struct imx93_pdfc, bridge, &funcs);
+	if (IS_ERR(pdfc))
+		return PTR_ERR(pdfc);
+
+	pdfc->regmap = syscon_node_to_regmap(dev->of_node->parent);
+	if (IS_ERR(pdfc->regmap))
+		return dev_err_probe(dev, PTR_ERR(pdfc->regmap),
+				     "failed to get regmap\n");
+
+	err = of_property_read_reg(dev->of_node, 0, &pdfc->disp_mux_reg_off, NULL);
+	if (err)
+		return dev_err_probe(dev, err,
+				     "failed to get display-mux reg\n");
+
+	/* No limits per default */
+	pdfc->phy_bus_width = 24;
+
+	/* Get output ep (port1/endpoint0) */
+	ep = of_graph_get_endpoint_by_regs(dev->of_node, 1, 0);
+	if (ep) {
+		err = of_property_read_u32(ep, "bus-width", &pdfc->phy_bus_width);
+		of_node_put(ep);
+
+		/* bus-width is optional but it must have valid data if present */
+		if (err && err != -EINVAL)
+			return dev_err_probe(dev, err,
+					     "failed to query bus-width\n");
+	}
+
+	pdfc->next_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 1, 0);
+	if (IS_ERR(pdfc->next_bridge))
+		return dev_err_probe(dev, PTR_ERR(pdfc->next_bridge),
+				     "failed to get next bridge\n");
+
+	pdfc->dev = dev;
+	pdfc->bridge.driver_private = pdfc;
+	pdfc->bridge.of_node = dev->of_node;
+	pdfc->bridge.type = DRM_MODE_CONNECTOR_DPI;
+
+	return devm_drm_bridge_add(dev, &pdfc->bridge);
+}
+
+static const struct of_device_id imx93_pdfc_dt_ids[] = {
+	{ .compatible = "nxp,imx93-pdfc", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx93_pdfc_dt_ids);
+
+static struct platform_driver imx93_pdfc_bridge_driver = {
+	.probe	= imx93_pdfc_bridge_probe,
+	.driver	= {
+		.of_match_table = imx93_pdfc_dt_ids,
+		.name = "imx93_pdfc",
+	},
+};
+module_platform_driver(imx93_pdfc_bridge_driver);
+
+MODULE_DESCRIPTION("NXP i.MX93 parallel display format configuration driver");
+MODULE_AUTHOR("Liu Ying <victor.liu@nxp.com>");
+MODULE_LICENSE("GPL");

-- 
2.47.3

[PATCH v7 3/3] arm64: dts: imx93: Add parallel display output nodes

[Marco Felsch]

Add required OF nodes to support the i.MX93 parallel output (DPI) path.

On the i.MX93 a single LCDIF is connected to three bridges: DPI, LVDS
LDB and the MIPI-DSI whereas the i.MX91 support only the DPI bridge.

Map endpoint@0 as DPI bridge output since the i.MX93 TRM (Figure 485.
MEDIAMIX block diagram) doesn't mention any port-number <-> bridge
combination.

Set the MEDIA-AXI and MEDIA-APB clocks to the overdrive (OD) values
since the i.MX93 and i.MX91 use the overdrive (OD) clk settings per
default.

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
---
 arch/arm64/boot/dts/freescale/imx91_93_common.dtsi | 57 ++++++++++++++++++++++
 arch/arm64/boot/dts/freescale/imx93.dtsi           | 12 +++++
 2 files changed, 69 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx91_93_common.dtsi b/arch/arm64/boot/dts/freescale/imx91_93_common.dtsi
index 52da571f26c4e8a2703e4476b5541fa7aca52f10..6dc01a76c68425bb65576712bfd98950d662bd38 100644
--- a/arch/arm64/boot/dts/freescale/imx91_93_common.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx91_93_common.dtsi
@@ -1122,8 +1122,65 @@ media_blk_ctrl: system-controller@4ac10000 {
 				 <&clk IMX93_CLK_MIPI_DSI_GATE>;
 			clock-names = "apb", "axi", "nic", "disp", "cam",
 				      "pxp", "lcdif", "isi", "csi", "dsi";
+			assigned-clocks = <&clk IMX93_CLK_MEDIA_AXI>,
+					  <&clk IMX93_CLK_MEDIA_APB>,
+					  <&clk IMX93_CLK_MEDIA_DISP_PIX>;
+			assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>,
+						 <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+						 <&clk IMX93_CLK_VIDEO_PLL>;
+			assigned-clock-rates = <400000000>, <133333333>;
 			#power-domain-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			status = "disabled";
+
+			dpi_bridge: bridge@60 {
+				compatible = "nxp,imx93-pdfc";
+				reg = <0x60 0x4>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dpi_from_lcdif: endpoint {
+							remote-endpoint = <&lcdif_to_dpi>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						dpi_to_panel: endpoint {
+						};
+					};
+				};
+			};
+		};
+
+		lcdif: display-controller@4ae30000 {
+			compatible = "fsl,imx93-lcdif";
+			reg = <0x4ae30000 0x23c>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX93_CLK_MEDIA_DISP_PIX>,
+				 <&clk IMX93_CLK_LCDIF_GATE>,
+				 <&clk IMX93_CLK_MEDIA_AXI>;
+			clock-names = "pix", "axi", "disp_axi";
+			power-domains = <&media_blk_ctrl IMX93_MEDIABLK_PD_LCDIF>;
+			status = "disabled";
+
+			port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				lcdif_to_dpi: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&dpi_from_lcdif>;
+				};
+			};
 		};
 
 		usbotg1: usb@4c100000 {
diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index 7b27012dfcb564650882dc8c40e836e797b2fda1..5436b48b30e89eb1f939b398ce1bf105abe7e34b 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -150,6 +150,18 @@ l3_cache: l3-cache {
 	};
 };
 
+&lcdif {
+	port {
+		lcdif_to_ldb: endpoint@1 {
+			reg = <1>;
+		};
+
+		lcdif_to_dsi: endpoint@2 {
+			reg = <2>;
+		};
+	};
+};
+
 &src {
 	mlmix: power-domain@44461800 {
 		compatible = "fsl,imx93-src-slice";

-- 
2.47.3

Re: [PATCH v7 1/3] dt-bindings: soc: imx93-media-blk-ctrl: Add PDFC subnode to schema and example

[Rob Herring]

On Tue, Dec 02, 2025 at 02:32:58PM +0100, Marco Felsch wrote:
> From: Liu Ying <victor.liu@nxp.com>
> 
> i.MX93 SoC mediamix blk-ctrl contains one DISPLAY_MUX register which
> configures parallel display format by using the "PARALLEL_DISP_FORMAT"
> field. Document the Parallel Display Format Configuration(PDFC) subnode
> and add the subnode to example.
> 
> Signed-off-by: Liu Ying <victor.liu@nxp.com>
> [m.felsch@pengutronix.de: port to v6.18-rc1]
> [m.felsch@pengutronix.de: add bus-width]
> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
> ---
>  .../bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml | 92 ++++++++++++++++++++++
>  1 file changed, 92 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
> index 34aea58094e55365a2f9c86092f637e533f954ff..6e2d86d9341c75108b492bcbabc8a560d8e707cd 100644
> --- a/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
> +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
> @@ -26,6 +26,12 @@ properties:
>    reg:
>      maxItems: 1
>  
> +  '#address-cells':
> +    const: 1
> +
> +  '#size-cells':
> +    const: 1
> +

And 'ranges' needed.

>    '#power-domain-cells':
>      const: 1
>  
> @@ -40,6 +46,60 @@ properties:
>      minItems: 8
>      maxItems: 10
>  
> +  bridge@60:
> +    type: object
> +    additionalProperties: false
> +
> +    properties:
> +      compatible:
> +        const: nxp,imx93-pdfc
> +
> +      reg:
> +        maxItems: 1
> +
> +      ports:
> +        $ref: /schemas/graph.yaml#/properties/ports
> +
> +        properties:
> +          port@0:
> +            $ref: /schemas/graph.yaml#/properties/port
> +            description: Input port node to receive pixel data.
> +
> +          port@1:
> +            $ref: /schemas/graph.yaml#/$defs/port-base
> +            unevaluatedProperties: false
> +            description: Output port node to downstream pixel data receivers.
> +
> +            properties:
> +              endpoint:
> +                $ref: /schemas/graph.yaml#/$defs/endpoint-base
> +                unevaluatedProperties: false
> +
> +                properties:
> +                  bus-width:
> +                    enum: [ 16, 18, 24 ]
> +                    description:
> +                      Specify the physical parallel bus width.
> +
> +                      This property is optional if the display bus-width
> +                      matches the SoC bus-width, e.g. a 18-bit RGB666 (display)
> +                      is connected and all 18-bit data lanes are muxed to the
> +                      parallel-output pads.
> +
> +                      This property must be set to 18 to cut only the LSBs
> +                      instead of the MSBs in case a 24-bit RGB888 display is
> +                      connected and only the lower 18-bit data lanes are muxed
> +                      to the parallel-output pads.
> +
> +        required:
> +          - port@0
> +          - port@1
> +
> +    required:
> +      - compatible
> +      - reg
> +      - ports
> +
>  allOf:
>    - if:
>        properties:
> @@ -81,9 +141,12 @@ allOf:
>              - const: isi
>              - const: csi
>              - const: dsi
> +
>  required:
>    - compatible
>    - reg
> +  - '#address-cells'
> +  - '#size-cells'
>    - power-domains
>    - clocks
>    - clock-names
> @@ -112,4 +175,33 @@ examples:
>                 clock-names = "apb", "axi", "nic", "disp", "cam",
>                               "pxp", "lcdif", "isi", "csi", "dsi";
>        #power-domain-cells = <1>;
> +      #address-cells = <1>;
> +      #size-cells = <1>;
> +
> +      bridge@60 {
> +        compatible = "nxp,imx93-pdfc";
> +        reg = <0x60 0x4>;
> +
> +        ports {
> +          #address-cells = <1>;
> +          #size-cells = <0>;
> +
> +          port@0 {
> +            reg = <0>;
> +
> +            pdfc_from_lcdif: endpoint {
> +              remote-endpoint = <&lcdif_to_pdfc>;
> +            };
> +          };
> +
> +          port@1 {
> +            reg = <1>;
> +
> +            pdfc_to_panel: endpoint {
> +              remote-endpoint = <&panel_from_pdfc>;
> +              bus-width = <18>;
> +            };
> +          };
> +        };
> +      };
>      };
> 
> -- 
> 2.47.3
> 

Re: [PATCH v7 1/3] dt-bindings: soc: imx93-media-blk-ctrl: Add PDFC subnode to schema and example

[Liu Ying]

Hi Marco,

On 12/02/2025, Marco Felsch wrote:
> From: Liu Ying <victor.liu@nxp.com>
> 
> i.MX93 SoC mediamix blk-ctrl contains one DISPLAY_MUX register which
> configures parallel display format by using the "PARALLEL_DISP_FORMAT"
> field. Document the Parallel Display Format Configuration(PDFC) subnode
> and add the subnode to example.
> 
> Signed-off-by: Liu Ying <victor.liu@nxp.com>
> [m.felsch@pengutronix.de: port to v6.18-rc1]
> [m.felsch@pengutronix.de: add bus-width]
> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
> ---
>  .../bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml | 92 ++++++++++++++++++++++
>  1 file changed, 92 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
> index 34aea58094e55365a2f9c86092f637e533f954ff..6e2d86d9341c75108b492bcbabc8a560d8e707cd 100644
> --- a/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
> +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
> @@ -26,6 +26,12 @@ properties:
>    reg:
>      maxItems: 1
>  
> +  '#address-cells':
> +    const: 1
> +
> +  '#size-cells':
> +    const: 1
> +
>    '#power-domain-cells':
>      const: 1
>  
> @@ -40,6 +46,60 @@ properties:
>      minItems: 8
>      maxItems: 10
>  
> +  bridge@60:

The dependency patch series mentioned in cover letter has two links in it's
cover letter.  Reading the patch sets pointed by the two links, we may find
Krzysztof's comments - the child nodes of the blk-ctrl should be completely
documented.

> +    type: object
> +    additionalProperties: false
> +
> +    properties:
> +      compatible:
> +        const: nxp,imx93-pdfc
> +
> +      reg:
> +        maxItems: 1
> +
> +      ports:
> +        $ref: /schemas/graph.yaml#/properties/ports
> +
> +        properties:
> +          port@0:
> +            $ref: /schemas/graph.yaml#/properties/port
> +            description: Input port node to receive pixel data.
> +
> +          port@1:
> +            $ref: /schemas/graph.yaml#/$defs/port-base
> +            unevaluatedProperties: false
> +            description: Output port node to downstream pixel data receivers.
> +
> +            properties:
> +              endpoint:
> +                $ref: /schemas/graph.yaml#/$defs/endpoint-base
> +                unevaluatedProperties: false
> +
> +                properties:
> +                  bus-width:

In v1-v5, I thought the output bus format can be determined by the sink
device(a panel or a bridge) hence properties like bus-width were not needed.
But, if this property is really needed, then reference video-interfaces.yaml
since bus-width is documented there.  Should we reference bus-type defined
in video-interfaces.yaml too?

> +                    enum: [ 16, 18, 24 ]

The PARALLEL_DISP_FORMAT field of DISPLAY_MUX register says this IP supports
below formats.  It seems that the enum here may tell RGB888, RGB666 and RGB565.
How can we tell RGB555, YCbCr 24 bits and YUV444 then?

000b RGB888 -> RGB888
001b RGB888 -> RGB666
010b RGB565 -> RGB565
011b RGB555 -> RGB555
100b YUV -> YCbCr 24 bits
101b YUV -> YUV444

> +                    description:
> +                      Specify the physical parallel bus width.
> +
> +                      This property is optional if the display bus-width
> +                      matches the SoC bus-width, e.g. a 18-bit RGB666 (display)
> +                      is connected and all 18-bit data lanes are muxed to the

Per video-interfaces.yaml, s/data lanes/data lines/.  "data lanes" is a
value for MIPI DSI/CSI, afaik.

> +                      parallel-output pads.

How about just saying that this property is optional and by default it's 24?

> +
> +                      This property must be set to 18 to cut only the LSBs
> +                      instead of the MSBs in case a 24-bit RGB888 display is
> +                      connected and only the lower 18-bit data lanes are muxed
> +                      to the parallel-output pads.

The __lower__ 18-bit?  Isn't it the __MSB__ 6bit in each color component?

> +
> +        required:
> +          - port@0
> +          - port@1
> +
> +    required:
> +      - compatible
> +      - reg
> +      - ports
> +
>  allOf:
>    - if:
>        properties:
> @@ -81,9 +141,12 @@ allOf:
>              - const: isi
>              - const: csi
>              - const: dsi
> +
>  required:
>    - compatible
>    - reg
> +  - '#address-cells'
> +  - '#size-cells'
>    - power-domains
>    - clocks
>    - clock-names
> @@ -112,4 +175,33 @@ examples:
>                 clock-names = "apb", "axi", "nic", "disp", "cam",
>                               "pxp", "lcdif", "isi", "csi", "dsi";
>        #power-domain-cells = <1>;
> +      #address-cells = <1>;
> +      #size-cells = <1>;
> +
> +      bridge@60 {
> +        compatible = "nxp,imx93-pdfc";
> +        reg = <0x60 0x4>;
> +
> +        ports {
> +          #address-cells = <1>;
> +          #size-cells = <0>;
> +
> +          port@0 {
> +            reg = <0>;
> +
> +            pdfc_from_lcdif: endpoint {
> +              remote-endpoint = <&lcdif_to_pdfc>;
> +            };
> +          };
> +
> +          port@1 {
> +            reg = <1>;
> +
> +            pdfc_to_panel: endpoint {
> +              remote-endpoint = <&panel_from_pdfc>;
> +              bus-width = <18>;
> +            };
> +          };
> +        };
> +      };
>      };
> 


-- 
Regards,
Liu Ying

Re: [PATCH v7 2/3] drm/bridge: imx: Add i.MX93 parallel display format configuration support

[Liu Ying]

Hi Marco,

On 12/02/2025, Marco Felsch wrote:
> From: Liu Ying <victor.liu@nxp.com>
> 
> NXP i.MX93 mediamix blk-ctrl contains one DISPLAY_MUX register which
> configures parallel display format by using the "PARALLEL_DISP_FORMAT"
> field. Add a DRM bridge driver to support the display format configuration.
> 
> Signed-off-by: Liu Ying <victor.liu@nxp.com>
> [m.felsch@pengutronix.de: port to v6.18-rc1]
> [m.felsch@pengutronix.de: add review feedback (Alexander)]
> [m.felsch@pengutronix.de: fix to short Kconfig description (checkpath)]
> [m.felsch@pengutronix.de: use "GPL" instead of "GPL v2" (checkpatch)]
> [m.felsch@pengutronix.de: make use of reg property]
> [m.felsch@pengutronix.de: add bus-width support]
> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
> ---
>  drivers/gpu/drm/bridge/imx/Kconfig      |  11 ++
>  drivers/gpu/drm/bridge/imx/Makefile     |   1 +
>  drivers/gpu/drm/bridge/imx/imx93-pdfc.c | 227 ++++++++++++++++++++++++++++++++
>  3 files changed, 239 insertions(+)
> 
> diff --git a/drivers/gpu/drm/bridge/imx/Kconfig b/drivers/gpu/drm/bridge/imx/Kconfig
> index 9a480c6abb856276df9b71d23b39a43b3a9c542d..28fd7a00473a0ec50bf0ffb5d50972abc209ceec 100644
> --- a/drivers/gpu/drm/bridge/imx/Kconfig
> +++ b/drivers/gpu/drm/bridge/imx/Kconfig
> @@ -88,4 +88,15 @@ config DRM_IMX93_MIPI_DSI
>  	  Choose this to enable MIPI DSI controller found in Freescale i.MX93
>  	  processor.
>  
> +config DRM_IMX93_PARALLEL_DISP_FMT_CONFIG
> +	tristate "NXP i.MX91/i.MX93 parallel display format configuration"
> +	depends on OF
> +	select DRM_KMS_HELPER
> +	help
> +	  On i.MX93 and i.MX91 SoCs the parallel display format output is
> +	  controlled via the MEDIAMIX BLK-CTRL DISPLAY_MUX.
> +
> +	  Say 'Y' or 'M' if you use the parallel display output path on a
> +	  i.MX93 or i.MX91 SoC.
> +
>  endif # ARCH_MXC || COMPILE_TEST
> diff --git a/drivers/gpu/drm/bridge/imx/Makefile b/drivers/gpu/drm/bridge/imx/Makefile
> index dd5d4858480663bade98bd58039d1cb6f8aa18da..f4ccc5cbef72a576443d5fecf666b76dfba8aa94 100644
> --- a/drivers/gpu/drm/bridge/imx/Makefile
> +++ b/drivers/gpu/drm/bridge/imx/Makefile
> @@ -8,3 +8,4 @@ obj-$(CONFIG_DRM_IMX8QXP_PIXEL_COMBINER) += imx8qxp-pixel-combiner.o
>  obj-$(CONFIG_DRM_IMX8QXP_PIXEL_LINK) += imx8qxp-pixel-link.o
>  obj-$(CONFIG_DRM_IMX8QXP_PIXEL_LINK_TO_DPI) += imx8qxp-pxl2dpi.o
>  obj-$(CONFIG_DRM_IMX93_MIPI_DSI) += imx93-mipi-dsi.o
> +obj-$(CONFIG_DRM_IMX93_PARALLEL_DISP_FMT_CONFIG) += imx93-pdfc.o
> diff --git a/drivers/gpu/drm/bridge/imx/imx93-pdfc.c b/drivers/gpu/drm/bridge/imx/imx93-pdfc.c
> new file mode 100644
> index 0000000000000000000000000000000000000000..624389def0ac3f24158edc64a8913375a4cc2f12
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/imx/imx93-pdfc.c
> @@ -0,0 +1,227 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +
> +/*
> + * Copyright 2022-2025 NXP
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/bits.h>
> +#include <linux/media-bus-format.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_graph.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +
> +#include <drm/drm_atomic_state_helper.h>
> +#include <drm/drm_bridge.h>
> +#include <drm/drm_print.h>

Drop this header file if you won't use DRM_DEV_DEBUG_DRIVER() in v5.

> +
> +#define PARALLEL_DISP_FORMAT		GENMASK(10, 8)
> +#define FORMAT_RGB888_TO_RGB888		FIELD_PREP(PARALLEL_DISP_FORMAT, 0)
> +#define FORMAT_RGB888_TO_RGB666		FIELD_PREP(PARALLEL_DISP_FORMAT, 1)
> +#define FORMAT_RGB565_TO_RGB565		FIELD_PREP(PARALLEL_DISP_FORMAT, 2)
> +
> +struct imx93_pdfc {
> +	struct drm_bridge bridge;
> +	struct drm_bridge *next_bridge;
> +	struct device *dev;
> +	struct regmap *regmap;
> +	u64 disp_mux_reg_off;
> +	u32 phy_bus_width;
> +};
> +
> +static int
> +imx93_pdfc_bridge_attach(struct drm_bridge *bridge, struct drm_encoder *encoder,
> +			 enum drm_bridge_attach_flags flags)
> +{
> +	struct imx93_pdfc *pdfc = bridge->driver_private;
> +
> +	return drm_bridge_attach(bridge->encoder, pdfc->next_bridge, bridge, flags);
> +}
> +
> +static void imx93_pdfc_bridge_atomic_enable(struct drm_bridge *bridge,
> +					    struct drm_atomic_state *state)
> +{
> +	struct imx93_pdfc *pdfc = bridge->driver_private;
> +	const struct drm_bridge_state *bridge_state;
> +	unsigned int mask = PARALLEL_DISP_FORMAT;
> +	unsigned int val;
> +
> +	bridge_state = drm_atomic_get_new_bridge_state(state, bridge);
> +
> +	switch (bridge_state->output_bus_cfg.format) {
> +	case MEDIA_BUS_FMT_RGB888_1X24:
> +		val = FORMAT_RGB888_TO_RGB888;
> +		if (pdfc->phy_bus_width == 18) {
> +			/*
> +			 * Can be valid if physical bus limitation exist,

s/exist/exists/

> +			 * therefore use dev_dbg().
> +			 */
> +			dev_dbg(pdfc->dev, "Truncate two LSBs from each color\n");
> +			val = FORMAT_RGB888_TO_RGB666;
> +		}
> +		break;
> +	case MEDIA_BUS_FMT_RGB666_1X18:
> +		val = FORMAT_RGB888_TO_RGB666;
> +		break;
> +	case MEDIA_BUS_FMT_RGB565_1X16:
> +		val = FORMAT_RGB565_TO_RGB565;
> +		break;
> +	}
> +
> +	regmap_update_bits(pdfc->regmap, pdfc->disp_mux_reg_off, mask, val);
> +}
> +
> +static const u32 imx93_pdfc_bus_output_fmts[] = {
> +	MEDIA_BUS_FMT_RGB888_1X24,
> +	MEDIA_BUS_FMT_RGB666_1X18,
> +	MEDIA_BUS_FMT_RGB565_1X16,
> +	MEDIA_BUS_FMT_FIXED
> +};
> +
> +static bool imx93_pdfc_bus_output_fmt_supported(u32 fmt)
> +{
> +	int i;
> +
> +	for (i = 0; i < ARRAY_SIZE(imx93_pdfc_bus_output_fmts); i++) {
> +		if (imx93_pdfc_bus_output_fmts[i] == fmt)
> +			return true;
> +	}
> +
> +	return false;
> +}
> +
> +static u32 *
> +imx93_pdfc_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
> +					    struct drm_bridge_state *bridge_state,
> +					    struct drm_crtc_state *crtc_state,
> +					    struct drm_connector_state *conn_state,
> +					    u32 output_fmt,
> +					    unsigned int *num_input_fmts)
> +{
> +	u32 *input_fmts;
> +
> +	*num_input_fmts = 0;
> +
> +	if (!imx93_pdfc_bus_output_fmt_supported(output_fmt))
> +		return NULL;
> +
> +	input_fmts = kmalloc(sizeof(*input_fmts), GFP_KERNEL);
> +	if (!input_fmts)
> +		return NULL;
> +
> +	switch (output_fmt) {
> +	case MEDIA_BUS_FMT_RGB888_1X24:
> +	case MEDIA_BUS_FMT_RGB565_1X16:
> +		input_fmts[0] = output_fmt;
> +		break;
> +	case MEDIA_BUS_FMT_RGB666_1X18:
> +	case MEDIA_BUS_FMT_FIXED:
> +		input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X24;
> +		break;
> +	}
> +
> +	*num_input_fmts = 1;
> +
> +	return input_fmts;
> +}
> +
> +static int imx93_pdfc_bridge_atomic_check(struct drm_bridge *bridge,
> +					  struct drm_bridge_state *bridge_state,
> +					  struct drm_crtc_state *crtc_state,
> +					  struct drm_connector_state *conn_state)
> +{
> +	struct imx93_pdfc *pdfc = bridge->driver_private;
> +
> +	switch (bridge_state->output_bus_cfg.format) {
> +	case MEDIA_BUS_FMT_RGB888_1X24:
> +	case MEDIA_BUS_FMT_RGB666_1X18:
> +	case MEDIA_BUS_FMT_RGB565_1X16:

The case MEDIA_BUS_FMT_FIXED is also valid.

> +		return 0;
> +	default:
> +		dev_warn(pdfc->dev, "Unsupported output bus format: 0x%x\n",
> +			 bridge_state->output_bus_cfg.format);
> +		return -EINVAL;
> +	}
> +}
> +
> +static const struct drm_bridge_funcs funcs = {
> +	.attach			= imx93_pdfc_bridge_attach,
> +	.atomic_enable		= imx93_pdfc_bridge_atomic_enable,
> +	.atomic_duplicate_state	= drm_atomic_helper_bridge_duplicate_state,
> +	.atomic_destroy_state	= drm_atomic_helper_bridge_destroy_state,
> +	.atomic_get_input_bus_fmts	= imx93_pdfc_bridge_atomic_get_input_bus_fmts,
> +	.atomic_check		= imx93_pdfc_bridge_atomic_check,
> +	.atomic_reset		= drm_atomic_helper_bridge_reset,
> +};
> +
> +static int imx93_pdfc_bridge_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct imx93_pdfc *pdfc;
> +	struct device_node *ep;
> +	int err;
> +
> +	pdfc = devm_drm_bridge_alloc(dev, struct imx93_pdfc, bridge, &funcs);
> +	if (IS_ERR(pdfc))
> +		return PTR_ERR(pdfc);
> +
> +	pdfc->regmap = syscon_node_to_regmap(dev->of_node->parent);
> +	if (IS_ERR(pdfc->regmap))
> +		return dev_err_probe(dev, PTR_ERR(pdfc->regmap),
> +				     "failed to get regmap\n");
> +
> +	err = of_property_read_reg(dev->of_node, 0, &pdfc->disp_mux_reg_off, NULL);
> +	if (err)
> +		return dev_err_probe(dev, err,
> +				     "failed to get display-mux reg\n");
> +
> +	/* No limits per default */
> +	pdfc->phy_bus_width = 24;
> +
> +	/* Get output ep (port1/endpoint0) */
> +	ep = of_graph_get_endpoint_by_regs(dev->of_node, 1, 0);

Nit: DT binding just defines endpoint not endpoint0, so set the reg parameter
to -1.

> +	if (ep) {
> +		err = of_property_read_u32(ep, "bus-width", &pdfc->phy_bus_width);
> +		of_node_put(ep);
> +
> +		/* bus-width is optional but it must have valid data if present */
> +		if (err && err != -EINVAL)
> +			return dev_err_probe(dev, err,
> +					     "failed to query bus-width\n");
> +	}
> +
> +	pdfc->next_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 1, 0);
> +	if (IS_ERR(pdfc->next_bridge))
> +		return dev_err_probe(dev, PTR_ERR(pdfc->next_bridge),
> +				     "failed to get next bridge\n");
> +
> +	pdfc->dev = dev;
> +	pdfc->bridge.driver_private = pdfc;
> +	pdfc->bridge.of_node = dev->of_node;
> +	pdfc->bridge.type = DRM_MODE_CONNECTOR_DPI;
> +
> +	return devm_drm_bridge_add(dev, &pdfc->bridge);
> +}
> +
> +static const struct of_device_id imx93_pdfc_dt_ids[] = {
> +	{ .compatible = "nxp,imx93-pdfc", },

The cover letter and Kconfig say that both i.MX91 and i.MX93 are supported,
so need an additional compatible string for i.MX91?

> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, imx93_pdfc_dt_ids);
> +
> +static struct platform_driver imx93_pdfc_bridge_driver = {
> +	.probe	= imx93_pdfc_bridge_probe,
> +	.driver	= {
> +		.of_match_table = imx93_pdfc_dt_ids,
> +		.name = "imx93_pdfc",
> +	},
> +};
> +module_platform_driver(imx93_pdfc_bridge_driver);
> +
> +MODULE_DESCRIPTION("NXP i.MX93 parallel display format configuration driver");
> +MODULE_AUTHOR("Liu Ying <victor.liu@nxp.com>");
> +MODULE_LICENSE("GPL");
> 


-- 
Regards,
Liu Ying