[PATCH 1/2] arm64: dts: rockchip: drop touch panel display from rockpro64

[PATCH 1/2] arm64: dts: rockchip: drop touch panel display from rockpro64

[Peter Robinson]

The touch panel display is an optional add on for the RockPro64
so this should be an DT overlay, drop the panel options in
preparation to add this as an overlay.

This effectively reverts commit b65155c786c4 so as to add an
overlay for it.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
---
 .../boot/dts/rockchip/rk3399-rockpro64.dtsi   | 64 -------------------
 1 file changed, 64 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
index 51c6aa26d8285..e848ea6efac3f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
@@ -20,15 +20,6 @@ chosen {
 		stdout-path = "serial2:1500000n8";
 	};
 
-	/* enable for panel backlight support */
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <5>;
-		pwms = <&pwm0 0 1000000 0>;
-		status = "disabled";
-	};
-
 	clkin_gmac: external-gmac-clock {
 		compatible = "fixed-clock";
 		clock-frequency = <125000000>;
@@ -116,14 +107,6 @@ dit_p0_0: endpoint {
 		};
 	};
 
-	avdd: regulator-avdd {
-		compatible = "regulator-fixed";
-		regulator-name = "avdd";
-		regulator-min-microvolt = <11000000>;
-		regulator-max-microvolt = <11000000>;
-		vin-supply = <&vcc3v3_s0>;
-	};
-
 	vcc12v_dcin: regulator-vcc12v-dcin {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc12v_dcin";
@@ -590,19 +573,6 @@ fusb0: typec-portc@22 {
 		vbus-supply = <&vcc5v0_typec>;
 		status = "okay";
 	};
-
-	/* enable for pine64 touch screen support */
-	touch: touchscreen@5d {
-		compatible = "goodix,gt911";
-		reg = <0x5d>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <RK_PD5 IRQ_TYPE_EDGE_FALLING>;
-		AVDD28-supply = <&vcc3v0_touch>;
-		VDDIO-supply = <&vcc3v0_touch>;
-		irq-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
-		status = "disabled";
-	};
 };
 
 &i2s0 {
@@ -638,36 +608,6 @@ &io_domains {
 	gpio1830-supply = <&vcc_3v0>;
 };
 
-/* enable for pine64 panel display support */
-&mipi_dsi {
-	clock-master;
-	status = "disabled";
-
-	ports {
-		mipi_out: port@1 {
-			reg = <1>;
-
-			mipi_out_panel: endpoint {
-				remote-endpoint = <&mipi_in_panel>;
-			};
-		};
-	};
-
-	mipi_panel: panel@0 {
-		compatible = "feiyang,fy07024di26a30d";
-		reg = <0>;
-		avdd-supply = <&avdd>;
-		backlight = <&backlight>;
-		dvdd-supply = <&vcc3v3_s0>;
-
-		port {
-			mipi_in_panel: endpoint {
-				remote-endpoint = <&mipi_out_panel>;
-			};
-		};
-	};
-};
-
 &pcie0 {
 	ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
 	num-lanes = <4>;
@@ -782,10 +722,6 @@ vcc5v0_host_en: vcc5v0-host-en {
 	};
 };
 
-&pwm0 {
-	status = "okay";
-};
-
 &pwm1 {
 	status = "okay";
 };
-- 
2.49.0

[PATCH 2/2] arm64: dts: rockchip: add overlay for RockPro64 screen

[Peter Robinson]

The Pine64 touch panel is a panel consisting of the Feiyang fy07024di26a30d
panel with a Goodix gt911 touch screen. Add a device tree overlay to
allow the display to be easily used on the device.

This was previously included in the main device tree but left disabled
by default which still required rebuilding the DT to use the device, now
overlays can go upstream the overlay is the best way to handle the
add on devices.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
---
 arch/arm64/boot/dts/rockchip/Makefile         |  9 ++
 .../dts/rockchip/rk3399-rockpro64-screen.dtso | 89 +++++++++++++++++++
 2 files changed, 98 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-rockpro64-screen.dtso

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 3e8771ef69ba1..c7b13bff3ac20 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -77,6 +77,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4c.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-v2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-screen.dtso
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb
@@ -209,6 +210,14 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou-haikou-video-demo.dtb
 rk3399-puma-haikou-haikou-video-demo-dtbs := rk3399-puma-haikou.dtb \
 	rk3399-puma-haikou-video-demo.dtbo
 
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-screen.dtb
+rk3399-rockpro64-screen-dtbs := rk3399-rockpro64.dtb \
+	rk3399-rockpro64-screen.dtbo
+
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-screen.dtb
+rk3399-rockpro64-v2-screen-dtbs := rk3399-rockpro64-v2.dtb \
+	rk3399-rockpro64-screen.dtbo
+
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-vz-2-uhd.dtb
 rk3568-wolfvision-pf5-vz-2-uhd-dtbs := rk3568-wolfvision-pf5.dtb \
 	rk3568-wolfvision-pf5-display-vz.dtbo \
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64-screen.dtso b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64-screen.dtso
new file mode 100644
index 0000000000000..26899cd67fc9b
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64-screen.dtso
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2025 Peter Robinson <pbrobinson@gmail.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+
+&{/} {
+	avdd: regulator-avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd";
+		regulator-min-microvolt = <11000000>;
+		regulator-max-microvolt = <11000000>;
+		vin-supply = <&vcc3v3_s0>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <5>;
+		pwms = <&pwm0 0 1000000 0>;
+		status = "okay";
+	};
+};
+
+&i2c4 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	touch: touchscreen@5d {
+		compatible = "goodix,gt911";
+		reg = <0x5d>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <RK_PD5 IRQ_TYPE_EDGE_FALLING>;
+		AVDD28-supply = <&vcc3v0_touch>;
+		VDDIO-supply = <&vcc3v0_touch>;
+		irq-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+};
+
+&mipi_dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	clock-master;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mipi_out: port@1 {
+			reg = <1>;
+
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	mipi_panel: panel@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		compatible = "feiyang,fy07024di26a30d";
+		reg = <0>;
+		avdd-supply = <&avdd>;
+		backlight = <&backlight>;
+		dvdd-supply = <&vcc3v3_s0>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
-- 
2.49.0

Re: [PATCH 2/2] arm64: dts: rockchip: add overlay for RockPro64 screen

[Krzysztof Kozlowski]

On 18/05/2025 23:59, Peter Robinson wrote:
> The Pine64 touch panel is a panel consisting of the Feiyang fy07024di26a30d
> panel with a Goodix gt911 touch screen. Add a device tree overlay to
> allow the display to be easily used on the device.
> 
> This was previously included in the main device tree but left disabled
> by default which still required rebuilding the DT to use the device, now
> overlays can go upstream the overlay is the best way to handle the
> add on devices.
> 
> Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
> ---
>  arch/arm64/boot/dts/rockchip/Makefile         |  9 ++
>  .../dts/rockchip/rk3399-rockpro64-screen.dtso | 89 +++++++++++++++++++
>  2 files changed, 98 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-rockpro64-screen.dtso
> 
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index 3e8771ef69ba1..c7b13bff3ac20 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -77,6 +77,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4c.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-v2.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-screen.dtso


This was absolutely never built as reported by Naresh. You should never
sent patches which are at least built tested... although they should be
actually tested as well, but if code does not build actual testing is
impossible.

Best regards,
Krzysztof

Re: [PATCH 2/2] arm64: dts: rockchip: add overlay for RockPro64 screen

[Krzysztof Kozlowski]

On 10/06/2025 12:44, Krzysztof Kozlowski wrote:
> On 18/05/2025 23:59, Peter Robinson wrote:
>> The Pine64 touch panel is a panel consisting of the Feiyang fy07024di26a30d
>> panel with a Goodix gt911 touch screen. Add a device tree overlay to
>> allow the display to be easily used on the device.
>>
>> This was previously included in the main device tree but left disabled
>> by default which still required rebuilding the DT to use the device, now
>> overlays can go upstream the overlay is the best way to handle the
>> add on devices.
>>
>> Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
>> ---
>>  arch/arm64/boot/dts/rockchip/Makefile         |  9 ++
>>  .../dts/rockchip/rk3399-rockpro64-screen.dtso | 89 +++++++++++++++++++
>>  2 files changed, 98 insertions(+)
>>  create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-rockpro64-screen.dtso
>>
>> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
>> index 3e8771ef69ba1..c7b13bff3ac20 100644
>> --- a/arch/arm64/boot/dts/rockchip/Makefile
>> +++ b/arch/arm64/boot/dts/rockchip/Makefile
>> @@ -77,6 +77,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4c.dtb
>>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
>>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-v2.dtb
>>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
>> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-screen.dtso
> 
> 
> This was absolutely never built as reported by Naresh. You should never
> sent patches which are at least built tested... although they should be
> actually tested as well, but if code does not build actual testing is
> impossible.

Huh, I was wrong - this actually builds, just cannot execute install target.

Best regards,
Krzysztof

Re: [PATCH 2/2] arm64: dts: rockchip: add overlay for RockPro64 screen

[Heiko Stübner]

Am Dienstag, 10. Juni 2025, 12:48:50 Mitteleuropäische Sommerzeit schrieb Krzysztof Kozlowski:
> On 10/06/2025 12:44, Krzysztof Kozlowski wrote:
> > On 18/05/2025 23:59, Peter Robinson wrote:
> >> The Pine64 touch panel is a panel consisting of the Feiyang fy07024di26a30d
> >> panel with a Goodix gt911 touch screen. Add a device tree overlay to
> >> allow the display to be easily used on the device.
> >>
> >> This was previously included in the main device tree but left disabled
> >> by default which still required rebuilding the DT to use the device, now
> >> overlays can go upstream the overlay is the best way to handle the
> >> add on devices.
> >>
> >> Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
> >> ---
> >>  arch/arm64/boot/dts/rockchip/Makefile         |  9 ++
> >>  .../dts/rockchip/rk3399-rockpro64-screen.dtso | 89 +++++++++++++++++++
> >>  2 files changed, 98 insertions(+)
> >>  create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-rockpro64-screen.dtso
> >>
> >> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> >> index 3e8771ef69ba1..c7b13bff3ac20 100644
> >> --- a/arch/arm64/boot/dts/rockchip/Makefile
> >> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> >> @@ -77,6 +77,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4c.dtb
> >>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
> >>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-v2.dtb
> >>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
> >> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-screen.dtso
> > 
> > 
> > This was absolutely never built as reported by Naresh. You should never
> > sent patches which are at least built tested... although they should be
> > actually tested as well, but if code does not build actual testing is
> > impossible.
> 
> Huh, I was wrong - this actually builds, just cannot execute install target.

I did build it as well after applying - but still managed to overlook the dtso vs. dtbo
But I'm surprised that still built yesterday

I'll amend the commit for the dtso -> dtbo change.


Heiko

Re: [PATCH 2/2] arm64: dts: rockchip: add overlay for RockPro64 screen

[Diederik de Haas]

[-- Attachment #1: Type: text/plain, Size: 2388 bytes --]

Hi,

On Sun May 18, 2025 at 11:59 PM CEST, Peter Robinson wrote:
> The Pine64 touch panel is a panel consisting of the Feiyang fy07024di26a30d
> panel with a Goodix gt911 touch screen. Add a device tree overlay to
> allow the display to be easily used on the device.
>
> This was previously included in the main device tree but left disabled
> by default which still required rebuilding the DT to use the device, now
> overlays can go upstream the overlay is the best way to handle the
> add on devices.
>
> Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
> ---
>  arch/arm64/boot/dts/rockchip/Makefile         |  9 ++
>  .../dts/rockchip/rk3399-rockpro64-screen.dtso | 89 +++++++++++++++++++
>  2 files changed, 98 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-rockpro64-screen.dtso
>
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index 3e8771ef69ba1..c7b13bff3ac20 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -77,6 +77,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4c.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-v2.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-screen.dtso

``s/rk3399-rockpro64-screen.dtso/rk3399-rockpro64-screen.dtbo``

Cheers,
  Diederik

>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb
> @@ -209,6 +210,14 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou-haikou-video-demo.dtb
>  rk3399-puma-haikou-haikou-video-demo-dtbs := rk3399-puma-haikou.dtb \
>  	rk3399-puma-haikou-video-demo.dtbo
>  
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-screen.dtb
> +rk3399-rockpro64-screen-dtbs := rk3399-rockpro64.dtb \
> +	rk3399-rockpro64-screen.dtbo
> +
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-screen.dtb
> +rk3399-rockpro64-v2-screen-dtbs := rk3399-rockpro64-v2.dtb \
> +	rk3399-rockpro64-screen.dtbo
> +
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-vz-2-uhd.dtb
>  rk3568-wolfvision-pf5-vz-2-uhd-dtbs := rk3568-wolfvision-pf5.dtb \
>  	rk3568-wolfvision-pf5-display-vz.dtbo \
> <snip>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH 2/2] arm64: dts: rockchip: add overlay for RockPro64 screen

[Diederik de Haas]

[-- Attachment #1: Type: text/plain, Size: 2250 bytes --]

On Tue Jun 10, 2025 at 1:33 PM CEST, Diederik de Haas wrote:
> On Sun May 18, 2025 at 11:59 PM CEST, Peter Robinson wrote:
>> The Pine64 touch panel is a panel consisting of the Feiyang fy07024di26a30d
>> panel with a Goodix gt911 touch screen. Add a device tree overlay to
>> allow the display to be easily used on the device.
>> ...
>> ---
>>  arch/arm64/boot/dts/rockchip/Makefile         |  9 ++
>>  .../dts/rockchip/rk3399-rockpro64-screen.dtso | 89 +++++++++++++++++++
>>  2 files changed, 98 insertions(+)
>>  create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-rockpro64-screen.dtso
>>
>> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
>> index 3e8771ef69ba1..c7b13bff3ac20 100644
>> --- a/arch/arm64/boot/dts/rockchip/Makefile
>> +++ b/arch/arm64/boot/dts/rockchip/Makefile
>> @@ -77,6 +77,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4c.dtb
>>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
>>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-v2.dtb
>>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
>> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-screen.dtso
>
> ``s/rk3399-rockpro64-screen.dtso/rk3399-rockpro64-screen.dtbo``

nvm, it was already correctly applied by Heiko.

> Cheers,
>   Diederik
>
>>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
>>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
>>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb
>> @@ -209,6 +210,14 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou-haikou-video-demo.dtb
>>  rk3399-puma-haikou-haikou-video-demo-dtbs := rk3399-puma-haikou.dtb \
>>  	rk3399-puma-haikou-video-demo.dtbo
>>  
>> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-screen.dtb
>> +rk3399-rockpro64-screen-dtbs := rk3399-rockpro64.dtb \
>> +	rk3399-rockpro64-screen.dtbo
>> +
>> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-screen.dtb
>> +rk3399-rockpro64-v2-screen-dtbs := rk3399-rockpro64-v2.dtb \
>> +	rk3399-rockpro64-screen.dtbo
>> +
>>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-vz-2-uhd.dtb
>>  rk3568-wolfvision-pf5-vz-2-uhd-dtbs := rk3568-wolfvision-pf5.dtb \
>>  	rk3568-wolfvision-pf5-display-vz.dtbo \
>> <snip>


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH 1/2] arm64: dts: rockchip: drop touch panel display from rockpro64

[Heiko Stuebner]

On Sun, 18 May 2025 22:59:33 +0100, Peter Robinson wrote:
> The touch panel display is an optional add on for the RockPro64
> so this should be an DT overlay, drop the panel options in
> preparation to add this as an overlay.
> 
> This effectively reverts commit b65155c786c4 so as to add an
> overlay for it.
> 
> [...]

Applied, thanks!

[1/2] arm64: dts: rockchip: drop touch panel display from rockpro64
      commit: d69cb63780943fc1b0765bb9b46f627573cc97d1
[2/2] arm64: dts: rockchip: add overlay for RockPro64 screen
      commit: 49760b9f60528393cca3ea35c4d0719f84215a48

Best regards,
-- 
Heiko Stuebner <heiko@sntech.de>