From mboxrd@z Thu Jan 1 00:00:00 1970 From: Manu Gautam Subject: Re: [PATCH 5/6] dt-bindings: phy-qcom-usb2: Update bindings for sdm845 Date: Mon, 19 Mar 2018 10:11:29 +0530 Message-ID: <71f0d215-9d6b-efd6-d3fc-e11326615b2c@codeaurora.org> References: <1521193500-4696-1-git-send-email-mgautam@codeaurora.org> <1521193500-4696-6-git-send-email-mgautam@codeaurora.org> <20180318033421.bicewbj3s5wenuis@rob-hp-laptop> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20180318033421.bicewbj3s5wenuis@rob-hp-laptop> Content-Language: en-US Sender: linux-kernel-owner@vger.kernel.org To: Rob Herring Cc: Kishon Vijay Abraham I , linux-arm-msm@vger.kernel.org, Mark Rutland , Vivek Gautam , Stephen Boyd , "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" , open list List-Id: devicetree@vger.kernel.org Hi, On 3/18/2018 6:22 PM, Rob Herring wrote: > On Fri, Mar 16, 2018 at 03:14:58PM +0530, Manu Gautam wrote: >> Update compatible strings for USB2 PHYs on sdm845. >> There are two QUSB2 PHYs present on sdm845. Few PHY registers >> programming is different for these PHYs related to electrical >> parameters, otherwise both are same. > Register locations are different or tuning values are different? For the > latter, is that something that could be DT properties? There are only register values changes. Corresponding driver change: https://patchwork.kernel.org/patch/10286803/ -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project