Re: [PATCH v11 6/6] arm64: dts: qcom: lemans: Add OPP-table for ICE UFS device node

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 6/8/26 11:47 PM, Abhinaba Rakshit wrote:
> Qualcomm Inline Crypto Engine (ICE) platform driver now supports
> an optional OPP-table.
> 
> Add OPP-table for ICE UFS device nodes for LeMans platform.
> 
> Signed-off-by: Abhinaba Rakshit <abhinaba.rakshit@oss.qualcomm.com>
> ---
>  arch/arm64/boot/dts/qcom/lemans.dtsi | 26 ++++++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/lemans.dtsi b/arch/arm64/boot/dts/qcom/lemans.dtsi
> index 353a6e6fd3acb22ef228bee340212b8b2c300957..f100d706edde465730873702f0b0a00b44050c23 100644
> --- a/arch/arm64/boot/dts/qcom/lemans.dtsi
> +++ b/arch/arm64/boot/dts/qcom/lemans.dtsi
> @@ -3109,6 +3109,32 @@ ice: crypto@1d88000 {
>  			clock-names = "core",
>  				      "iface";
>  			power-domains = <&gcc UFS_PHY_GDSC>;
> +
> +			operating-points-v2 = <&ice_opp_table>;
> +
> +			ice_opp_table: opp-table {
> +				compatible = "operating-points-v2";
> +
> +				opp-75000000 {
> +					opp-hz = /bits/ 64 <75000000>;
> +					required-opps = <&rpmhpd_opp_svs_l1>;
> +				};
> +
> +				opp-150000000 {
> +					opp-hz = /bits/ 64 <150000000>;
> +					required-opps = <&rpmhpd_opp_svs_l1>;
> +				};
> +
> +				opp-300000000 {
> +					opp-hz = /bits/ 64 <300000000>;
> +					required-opps = <&rpmhpd_opp_nom>;
> +				};
> +
> +				opp-600000000 {
> +					opp-hz = /bits/ 64 <600000000>;
> +					required-opps = <&rpmhpd_opp_nom>;
> +				};

Analogous question for both pairs of frequencies

Konrad