From: Paul Menzel <pmenzel@molgen.mpg.de>
To: Jim Liu <jim.t90615@gmail.com>
Cc: Jim Liu <JJLIU0@nuvoton.com>,
KWLIU@nuvoton.com, linus.walleij@linaro.org, brgl@bgdev.pl,
andy@kernel.org, robh+dt@kernel.org,
krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
Rob Herring <robh@kernel.org>,
linux-gpio@vger.kernel.org, openbmc@lists.ozlabs.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH v9 1/3] dt-bindings: gpio: add NPCM sgpio driver bindings
Date: Tue, 12 Dec 2023 08:00:34 +0100 [thread overview]
Message-ID: <72fe6f18-e3d7-4c74-9734-01a33dc8e100@molgen.mpg.de> (raw)
In-Reply-To: <20231212065147.3475413-2-jim.t90615@gmail.com>
Dear Jim,
Thank you for your patch.
Am 12.12.23 um 07:51 schrieb Jim Liu:
> Add dt-bindings document for the Nuvoton NPCM7xx sgpio driver
>
> Signed-off-by: Jim Liu <jim.t90615@gmail.com>
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> Reviewed-by: Rob Herring <robh@kernel.org>
As you seem to be employed by Nuvoton, should your company/work email be
listed somehow, and even be used for the author address?
> ---
> Changes for v9:
> - no changed
> Changes for v8:
> - no changed
> Changes for v7:
> - no changed
> ---
> .../bindings/gpio/nuvoton,sgpio.yaml | 86 +++++++++++++++++++
> 1 file changed, 86 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/gpio/nuvoton,sgpio.yaml
>
> diff --git a/Documentation/devicetree/bindings/gpio/nuvoton,sgpio.yaml b/Documentation/devicetree/bindings/gpio/nuvoton,sgpio.yaml
> new file mode 100644
> index 000000000000..84e0dbcb066c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpio/nuvoton,sgpio.yaml
> @@ -0,0 +1,86 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/gpio/nuvoton,sgpio.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Nuvoton SGPIO controller
> +
> +maintainers:
> + - Jim LIU <JJLIU0@nuvoton.com>
> +
> +description: |
> + This SGPIO controller is for NUVOTON NPCM7xx and NPCM8xx SoC.
> + Nuvoton NPCM7xx SGPIO module is combine serial to parallel IC (HC595)
s/is combine/combines a/
> + and parallel to serial IC (HC165), and use APB3 clock to control it.
use*s*
> + This interface has 4 pins (D_out , D_in, S_CLK, LDSH).
Only one space before the (.
> + NPCM7xx/NPCM8xx have two sgpio module each module can support up
… modules. Each module …
> + to 64 output pins,and up to 64 input pin, the pin is only for gpi or gpo.
1. Space after the comma.
2. 64 input pin*s
> + GPIO pins have sequential, First half is gpo and second half is gpi.
have sequential ?.
> + GPIO pins can be programmed to support the following options
> + - Support interrupt option for each input port and various interrupt
> + sensitivity option (level-high, level-low, edge-high, edge-low)
option*s*
> + - ngpios is number of nuvoton,input-ngpios GPIO lines and nuvoton,output-ngpios GPIO lines.
> + nuvoton,input-ngpios GPIO lines is only for gpi.
s/is/are/
> + nuvoton,output-ngpios GPIO lines is only for gpo.
s/is/are/
It’d be great if you mentioned the datasheet name and revision in the
description.
> +
> +properties:
> + compatible:
> + enum:
> + - nuvoton,npcm750-sgpio
> + - nuvoton,npcm845-sgpio
> +
> + reg:
> + maxItems: 1
> +
> + gpio-controller: true
> +
> + '#gpio-cells':
> + const: 2
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> + nuvoton,input-ngpios:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + The numbers of GPIO's exposed. GPIO lines is only for gpi.
s/is/are/
> + minimum: 0
> + maximum: 64
> +
> + nuvoton,output-ngpios:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + The numbers of GPIO's exposed. GPIO lines is only for gpo.
s/is/are/
> + minimum: 0
> + maximum: 64
> +
> +required:
> + - compatible
> + - reg
> + - gpio-controller
> + - '#gpio-cells'
> + - interrupts
> + - nuvoton,input-ngpios
> + - nuvoton,output-ngpios
> + - clocks
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/nuvoton,npcm7xx-clock.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + gpio8: gpio@101000 {
> + compatible = "nuvoton,npcm750-sgpio";
> + reg = <0x101000 0x200>;
> + clocks = <&clk NPCM7XX_CLK_APB3>;
> + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + nuvoton,input-ngpios = <64>;
> + nuvoton,output-ngpios = <64>;
> + };
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Kind regards,
Paul Menzel
next prev parent reply other threads:[~2023-12-12 7:01 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-12 6:51 [PATCH v9 0/3] Add Nuvoton NPCM SGPIO feature Jim Liu
2023-12-12 6:51 ` [PATCH v9 1/3] dt-bindings: gpio: add NPCM sgpio driver bindings Jim Liu
2023-12-12 7:00 ` Paul Menzel [this message]
2023-12-12 8:41 ` Jim Liu
2023-12-12 6:51 ` [PATCH v9 2/3] arm: dts: nuvoton: npcm: Add sgpio feature Jim Liu
2023-12-12 6:51 ` [PATCH v9 3/3] gpio: nuvoton: Add Nuvoton NPCM sgpio driver Jim Liu
2023-12-13 15:27 ` Andy Shevchenko
2023-12-21 6:27 ` Jim Liu
2023-12-21 16:28 ` Andy Shevchenko
2023-12-22 1:27 ` Jim Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=72fe6f18-e3d7-4c74-9734-01a33dc8e100@molgen.mpg.de \
--to=pmenzel@molgen.mpg.de \
--cc=JJLIU0@nuvoton.com \
--cc=KWLIU@nuvoton.com \
--cc=andy@kernel.org \
--cc=brgl@bgdev.pl \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jim.t90615@gmail.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=openbmc@lists.ozlabs.org \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).