From mboxrd@z Thu Jan  1 00:00:00 1970
From: kgunda@codeaurora.org
Subject: Re: [PATCH V6 5/8] backlight: qcom-wled: Restructure the driver for
 WLED3
Date: Fri, 04 Oct 2019 17:10:55 +0530
Message-ID: <7300c740873439b341d05ee40e071c3f@codeaurora.org>
References: <1569825553-26039-1-git-send-email-kgunda@codeaurora.org>
 <1569825553-26039-6-git-send-email-kgunda@codeaurora.org>
 <6f50ea19-f320-b4e6-f269-4d1e2189fa77@ti.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII;
 format=flowed
Content-Transfer-Encoding: 7bit
Return-path: <linux-kernel-owner@vger.kernel.org>
In-Reply-To: <6f50ea19-f320-b4e6-f269-4d1e2189fa77@ti.com>
Sender: linux-kernel-owner@vger.kernel.org
To: Dan Murphy <dmurphy@ti.com>
Cc: bjorn.andersson@linaro.org, jingoohan1@gmail.com, lee.jones@linaro.org, b.zolnierkie@samsung.com, dri-devel@lists.freedesktop.org, daniel.thompson@linaro.org, jacek.anaszewski@gmail.com, pavel@ucw.cz, robh+dt@kernel.org, mark.rutland@arm.com, linux-leds@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Andy Gross <agross@kernel.org>, linux-arm-msm@vger.kernel.org, linux-fbdev@vger.kernel.org
List-Id: devicetree@vger.kernel.org

On 2019-10-01 20:47, Dan Murphy wrote:
> Kiran
> 
> On 9/30/19 1:39 AM, Kiran Gunda wrote:
>> Restructure the driver to add the support for new WLED
>> peripherals.
>> 
>> Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
>> Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
>> ---
>>   drivers/video/backlight/qcom-wled.c | 395 
>> ++++++++++++++++++++++--------------
>>   1 file changed, 245 insertions(+), 150 deletions(-)
>> 
>> diff --git a/drivers/video/backlight/qcom-wled.c 
>> b/drivers/video/backlight/qcom-wled.c
>> index f191242..740f1b6 100644
>> --- a/drivers/video/backlight/qcom-wled.c
>> +++ b/drivers/video/backlight/qcom-wled.c
>> @@ -7,59 +7,71 @@
>>   #include <linux/module.h>
>>   #include <linux/of.h>
>>   #include <linux/of_device.h>
>> +#include <linux/of_address.h>
>>   #include <linux/regmap.h>
>>     /* From DT binding */
>> +#define WLED_MAX_STRINGS				4
>> +
>>   #define WLED_DEFAULT_BRIGHTNESS				2048
>>   -#define WLED3_SINK_REG_BRIGHT_MAX			0xFFF
>> -#define WLED3_CTRL_REG_VAL_BASE				0x40
>> +#define WLED_SINK_REG_BRIGHT_MAX			0xFFF
> 
> Why did you change some of these again?
> 
> Can you just change it to the final #define in patch 4/8?
> 
> Dan
> 
> <snip>
Ok.. Looks like some thing went wrong with this series. I will re-upload 
it again.