Re: [PATCH v2 01/11] scsi: ufs: exynos: Allow UFS Gear 4

[Tudor Ambarus <tudor.ambarus@linaro.org>]

On 10/25/24 2:14 PM, Peter Griffin wrote:
> UFS Gear 4 offers faster speeds, and better power usage so lets
> enable it.
> 
> Currently ufshcd_init_host_params() sets UFS_HS_G3 as a default,
> so even if the device supports G4 we end up negotiating down to
> G3.
> 
> For SoCs like gs101 which have a UFS major controller version
> of 3 or above advertise Gear 4. This then allows a Gear 4 link
> on Pixel 6.
> 
> For earlier controller versions keep the current default behaviour
> of reporting G3.
> 
> Signed-off-by: Peter Griffin <peter.griffin@linaro.org>

Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>

some nits/personal preferences below, no need to address them

> ---
>  drivers/ufs/host/ufs-exynos.c | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
> 
> diff --git a/drivers/ufs/host/ufs-exynos.c b/drivers/ufs/host/ufs-exynos.c
> index 9ec318ef52bf..e25de4b86ac0 100644
> --- a/drivers/ufs/host/ufs-exynos.c
> +++ b/drivers/ufs/host/ufs-exynos.c
> @@ -771,6 +771,21 @@ static void exynos_ufs_config_sync_pattern_mask(struct exynos_ufs *ufs,
>  	exynos_ufs_disable_ov_tm(hba);
>  }
>  
> +#define UFS_HW_VER_MAJOR_MASK   GENMASK(15, 8)
> +
> +static u32 exynos_ufs_get_hs_gear(struct ufs_hba *hba)
> +{
> +	u8 major;
> +
> +	major = FIELD_GET(UFS_HW_VER_MAJOR_MASK, hba->ufs_version);
> +
> +	if (major >= 3)
> +		return UFS_HS_G4;
> +
> +	/* Default is HS-G3 */
> +	return UFS_HS_G3;
> +}
> +
>  static int exynos_ufs_pre_pwr_mode(struct ufs_hba *hba,
>  				struct ufs_pa_layer_attr *dev_max_params,
>  				struct ufs_pa_layer_attr *dev_req_params)
> @@ -787,6 +802,8 @@ static int exynos_ufs_pre_pwr_mode(struct ufs_hba *hba,
>  	}
>  
>  	ufshcd_init_host_params(&host_params);

blank line

> +	/* This driver only support symmetric gear setting e.g. hs_tx_gear == hs_rx_gear */
> +	host_params.hs_tx_gear = host_params.hs_rx_gear = exynos_ufs_get_hs_gear(hba);

I find it easier to read if you split inits on their own line:
	host_params.hs_tx_gear = exynos_ufs_get_hs_gear(hba);
	host_params.hs_rx_gear = exynos_ufs_get_hs_gear(hba);

>  
>  	ret = ufshcd_negotiate_pwr_params(&host_params, dev_max_params, dev_req_params);
>  	if (ret) {