Re: [PATCH v3 07/33] dt-bindings: display: mediatek: Add binding for MT8195 HDMI-TX v2

["CK Hu (胡俊光)" <ck.hu@mediatek.com>]

Hi, Angelo:

On Tue, 2024-12-17 at 16:43 +0100, AngeloGioacchino Del Regno wrote:
> External email : Please do not click links or open attachments until you have verified the sender or the content.
> 
> 
> Add a binding for the HDMI TX v2 Encoder found in MediaTek MT8195
> and MT8188 SoCs.
> 
> This fully supports the HDMI Specification 2.0b, hence it provides
> support for 3D-HDMI, Polarity inversion, up to 16 bits Deep Color,
> color spaces including RGB444, YCBCR420/422/444 (ITU601/ITU709) and
> xvYCC, with output resolutions up to 3840x2160p@60Hz.
> 
> Moreover, it also supports HDCP 1.4 and 2.3, Variable Refresh Rate
> (VRR) and Consumer Electronics Control (CEC).
> 
> This IP also includes support for HDMI Audio, including IEC60958
> and IEC61937 SPDIF, 8-channel PCM, DSD, and other lossless audio
> according to HDMI 2.0.

NOTE: There is discussion in [1].

[1] https://patchwork.kernel.org/project/linux-mediatek/patch/20241205114518.53527-8-angelogioacchino.delregno@collabora.com/

Regards,
CK

> 
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> ---
>  .../mediatek/mediatek,mt8195-hdmi.yaml        | 154 ++++++++++++++++++
>  1 file changed, 154 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi.yaml
> new file mode 100644
> index 000000000000..73b1dfaa1adb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi.yaml
> @@ -0,0 +1,154 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: https://urldefense.com/v3/__http://devicetree.org/schemas/display/mediatek/mediatek,mt8195-hdmi.yaml*__;Iw!!CTRNKA9wMg0ARbw!iD_SefgVLlM0QdRazs33_spkjaIsc7gApEpGuJVf4jlsCGxK5FDtrYyCXsU1b3nyfXa7NNCClYTy3QmDmR61FjTWAi9G$
> +$schema: https://urldefense.com/v3/__http://devicetree.org/meta-schemas/core.yaml*__;Iw!!CTRNKA9wMg0ARbw!iD_SefgVLlM0QdRazs33_spkjaIsc7gApEpGuJVf4jlsCGxK5FDtrYyCXsU1b3nyfXa7NNCClYTy3QmDmR61FqSQzM6e$
> +
> +title: MediaTek HDMI-TX v2 Encoder
> +
> +maintainers:
> +  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> +  - CK Hu <ck.hu@mediatek.com>
> +
> +description:
> +  The MediaTek HDMI-TX v2 encoder can generate HDMI format data based on
> +  the HDMI Specification 2.0b.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - mediatek,mt8188-hdmi-tx
> +      - mediatek,mt8195-hdmi-tx
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: HDMI Peripheral Bus (APB) clock
> +      - description: HDCP and HDMI_TOP clock
> +      - description: HDCP and HDMI_TOP reference clock
> +      - description: VPP HDMI Split clock
> +
> +  clock-names:
> +    items:
> +      - const: bus
> +      - const: hdcp
> +      - const: hdcp24m
> +      - const: hdmi-split
> +
> +  i2c:
> +    type: object
> +    $ref: /schemas/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml
> +    unevaluatedProperties: false
> +    description: HDMI DDC I2C controller
> +
> +  phys:
> +    maxItems: 1
> +    description: PHY providing clocking TMDS and pixel to controller
> +
> +  phy-names:
> +    items:
> +      - const: hdmi
> +
> +  pinctrl-0: true
> +
> +  pinctrl-names:
> +    items:
> +      - const: default
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  '#sound-dai-cells':
> +    const: 1
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port@0:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Input port, usually connected to the output port of a DPI
> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Output port that must be connected either to the input port of
> +          a HDMI connector node containing a ddc-i2c-bus, or to the input
> +          port of an attached bridge chip, such as a SlimPort transmitter.
> +
> +    required:
> +      - port@0
> +      - port@1
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - interrupts
> +  - power-domains
> +  - phys
> +  - phy-names
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/mt8195-clk.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/power/mt8195-power.h>
> +
> +    soc {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        hdmi-tx@1c300000 {
> +            compatible = "mediatek,mt8195-hdmi-tx";
> +            reg = <0 0x1c300000 0 0x1000>;
> +            clocks = <&topckgen CLK_TOP_HDMI_APB>,
> +                     <&topckgen CLK_TOP_HDCP>,
> +                     <&topckgen CLK_TOP_HDCP_24M>,
> +                     <&vppsys1 CLK_VPP1_VPP_SPLIT_HDMI>;
> +            clock-names = "bus", "hdcp", "hdcp24m", "hdmi-split";
> +            interrupts = <GIC_SPI 677 IRQ_TYPE_LEVEL_HIGH 0>;
> +            phys = <&hdmi_phy>;
> +            phy-names = "hdmi";
> +            power-domains = <&spm MT8195_POWER_DOMAIN_HDMI_TX>;
> +            pinctrl-names = "default";
> +            pinctrl-0 = <&hdmi_pins>;
> +            #sound-dai-cells = <1>;
> +
> +            hdmitx_ddc: i2c {
> +                compatible = "mediatek,mt8195-hdmi-ddc";
> +                clocks = <&clk26m>;
> +            };
> +
> +            ports {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +
> +                port@0 {
> +                    reg = <0>;
> +
> +                    hdmi_in: endpoint {
> +                        remote-endpoint = <&dpi1_out>;
> +                    };
> +                };
> +
> +                port@1 {
> +                    reg = <1>;
> +
> +                    hdmi_out: endpoint {
> +                        remote-endpoint = <&hdmi_connector_in>;
> +                    };
> +                };
> +            };
> +        };
> +    };
> --
> 2.47.0
>