From: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
To: Maxime Ripard
<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Cc: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: Re: [PATCH 1/4] ARM: dts: sun8i: Extend Orange Pi PC dt to also handle the PC Plus
Date: Tue, 26 Jul 2016 23:07:23 +0200 [thread overview]
Message-ID: <74d3b5eb-601a-cc1d-a44e-fea2895fd8b2@redhat.com> (raw)
In-Reply-To: <20160725064033.GA7419@lukather>
Hi,
On 07/25/2016 08:40 AM, Maxime Ripard wrote:
> Hi,
>
> On Wed, Jul 13, 2016 at 12:01:41PM +0200, Hans de Goede wrote:
>> Hi,
>>
>> On 13-07-16 10:45, Maxime Ripard wrote:
>>> On Sat, Jul 09, 2016 at 10:21:55PM +0200, Hans de Goede wrote:
>>>> There is a new Orange Pi PC Plus available now, rather then adding
>>>> yet another dts file for this variant, extend the existing
>>>> Orange Pi PC to support the sdio wifi and emmc found on this variant.
>>>>
>>>> Downside of this approach is the following messages in dmesg when run
>>>> on the non Plus Orange Pi PC:
>>>>
>>>> sunxi-mmc 1c10000.mmc: fatal err update clk timeout
>>>> sunxi-mmc 1c11000.mmc: smc 2 err, cmd 8, RTO !!
>>>> sunxi-mmc 1c11000.mmc: smc 2 err, cmd 55, RTO !!
>>>> sunxi-mmc 1c11000.mmc: smc 2 err, cmd 55, RTO !!
>>>> sunxi-mmc 1c11000.mmc: smc 2 err, cmd 55, RTO !!
>>>> sunxi-mmc 1c11000.mmc: smc 2 err, cmd 55, RTO !!
>>>> sunxi-mmc 1c11000.mmc: smc 2 err, cmd 1, RTO !!
>>>>
>>>> Note these are completely harmless and there is no adverse effect
>>>> to the functioning of the non Plus Orange Pi PC.
>>>>
>>>> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
>>>> ---
>>>> arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts | 40 +++++++++++++++++++++++++++++-
>>>> 1 file changed, 39 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
>>>> index b8340f7..f9bf260 100644
>>>> --- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
>>>> +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
>>>> @@ -49,11 +49,13 @@
>>>> #include <dt-bindings/pinctrl/sun4i-a10.h>
>>>>
>>>> / {
>>>> - model = "Xunlong Orange Pi PC";
>>>> + model = "Xunlong Orange Pi PC / PC Plus";
>>>> compatible = "xunlong,orangepi-pc", "allwinner,sun8i-h3";
>>>>
>>>> aliases {
>>>> serial0 = &uart0;
>>>> + /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
>>>> + ethernet1 = &rtl8189ftv;
>>>> };
>>>>
>>>> chosen {
>>>> @@ -118,6 +120,42 @@
>>>> status = "okay";
>>>> };
>>>>
>>>> +/* Note only present on orangepi pc *plus* */
>>>> +&mmc1 {
>>>> + pinctrl-names = "default";
>>>> + pinctrl-0 = <&mmc1_pins_a>;
>>>> + vmmc-supply = <®_vcc3v3>;
>>>> + bus-width = <4>;
>>>> + non-removable;
>>>> + status = "okay";
>>>> +
>>>> + /*
>>>> + * Explicitly define the sdio device, so that we can add an ethernet
>>>> + * alias for it (which e.g. makes u-boot set a mac-address).
>>>> + */
>>>> + rtl8189ftv: sdio_wifi@1 {
>>>> + reg = <1>;
>>>> + };
>>>> +};
>>>
>>> Nothing prevents you from including the orange pi pc dts, from the
>>> orange pi plus dts.
>>>
>>> It prevents the duplication you were trying to avoid, and it doesn't
>>> create all those spurious errors and devices.
>>
>> That would solve the copy paste problem on the kernel side, but that
>> would still mean adding a new u-boot defconfig for this, which means that
>> all the distro's which ship with prebuild u-boot binaries need to build
>> for yet another board, something which I would like to avoid.
>
> Still, registering devices that are not present on the board is not an
> option.
Ok, new version send.
What about the other 3 patches in this series ?
Regards,
Hans
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-07-26 21:07 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-09 20:21 [PATCH 1/4] ARM: dts: sun8i: Extend Orange Pi PC dt to also handle the PC Plus Hans de Goede
[not found] ` <1468095718-18515-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-07-09 20:21 ` [PATCH 2/4] ARM: dts: sun8i: Extend Orange Pi Plus dt to also handle the Plus 2E Hans de Goede
2016-07-09 20:21 ` [PATCH 3/4] ARM: dts: sun8i: Add ethernet1 alias to Orange Pi 2 dts Hans de Goede
[not found] ` <1468095718-18515-3-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-07-28 18:20 ` Maxime Ripard
2016-07-09 20:21 ` [PATCH 4/4] ARM: dts: sun8i: Add dts file for the Orange Pi Lite SBC Hans de Goede
[not found] ` <1468095718-18515-4-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-07-28 18:21 ` Maxime Ripard
2016-07-13 8:45 ` [PATCH 1/4] ARM: dts: sun8i: Extend Orange Pi PC dt to also handle the PC Plus Maxime Ripard
2016-07-13 10:01 ` Hans de Goede
[not found] ` <bce2b340-a930-8771-4560-dc61bf5828d5-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-07-25 6:40 ` Maxime Ripard
2016-07-26 21:00 ` Hans de Goede
2016-07-26 21:07 ` Hans de Goede [this message]
[not found] ` <74d3b5eb-601a-cc1d-a44e-fea2895fd8b2-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-07-28 18:17 ` Maxime Ripard
2016-07-28 20:36 ` Hans de Goede
[not found] ` <f71f9d2b-00d4-27b8-1535-1ddc58f04ca3-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-08-07 14:25 ` Hans de Goede
[not found] ` <b6636083-917e-cc3a-9107-401fbd483fb7-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-08-26 18:45 ` Hans de Goede
2016-08-31 16:28 ` Maxime Ripard
2016-09-03 11:05 ` Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=74d3b5eb-601a-cc1d-a44e-fea2895fd8b2@redhat.com \
--to=hdegoede-h+wxahxf7alqt0dzr+alfa@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
--cc=wens-jdAy2FN1RRM@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).