Re: [PATCH] arm64: dts: qcom: sc8280xp: Add dsi nodes on SC8280XP

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 2/25/26 6:45 AM, Pengyu Luo wrote:
> The DT configuration follows other Samsung 5nm-based Qualcomm SOCs,
> utilizing the same register layouts and clock structures.
> 
> However, DSI won't work properly for now (Partial content wrapped to
> the left side) until we submit dispcc fixes. And some panels require
> DPU timing calculation fixes too. (hdisplay / width timing round errors
> cause the fifo error)
> 
> Co-developed-by: Tianyu Gao <gty0622@gmail.com>
> Signed-off-by: Tianyu Gao <gty0622@gmail.com>
> Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
> Tested-by: White Lewis <liu224806@gmail.com> # HUAWEI Gaokun3
> ---

[...]

> +					port@1 {
> +						reg = <1>;
> +						mdss0_intf1_out: endpoint {

style: it's preferable to keep a new line between the last property and the
following subnode, i.e.:

port@1 {
	reg = <1>;

	mdss0_intf1_out: endpoint {
	...
}

> +							remote-endpoint = <&mdss0_dsi0_in>;
> +						};
> +					};
> +
> +					port@2 {
> +						reg = <2>;
> +						mdss0_intf2_out: endpoint {
> +							remote-endpoint = <&mdss0_dsi1_in>;
> +						};
> +					};
> +
>  					port@4 {
>  						reg = <4>;
>  						mdss0_intf4_out: endpoint {
> @@ -4791,6 +4806,195 @@ opp-810000000 {

[...]

> +				phy-names = "dsi";
> +
> +				phys = <&mdss0_dsi0_phy>;

property
property-names

in this order, please

[...]


> +			mdss0_dsi0_phy: phy@ae94400 {
> +				compatible = "qcom,sc8280xp-dsi-phy-5nm";
> +				reg = <0 0x0ae94400 0 0x200>,
> +				      <0 0x0ae94600 0 0x280>,
> +				      <0 0x0ae94900 0 0x27c>;

last entry: size=0x280, all instances, there's actually a register at +0x27c

[...]

> +				mdss0_dsi1_opp_table: opp-table {

You can reference the prior OPP table (and just call it dsi_opp_table)
since they're identical

Konrad