* [PATCH 0/2] ARM: dts: Add support for Meta Clemente BMC
@ 2025-06-18 9:40 Leo Wang
2025-06-18 9:40 ` [PATCH 1/2] Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml Leo Wang
` (2 more replies)
0 siblings, 3 replies; 12+ messages in thread
From: Leo Wang @ 2025-06-18 9:40 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
Andrew Jeffery, Kees Cook, Tony Luck, Guilherme G. Piccoli,
Geert Uytterhoeven, Magnus Damm
Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel,
linux-hardening, linux-renesas-soc, bruce.jy.hung, george.kw.lee,
Leo Wang, Conor Dooley
This series adds initial support for the Meta Clemente BMC based on the ASPEED AST2600 SoC.
Patch 1 documents the compatible string.
Patch 2 adds the device tree for the board.
Signed-off-by: Leo Wang <leo.jt.wang@fii-foxconn.com>
---
Leo Wang (2):
Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
ARM: dts: aspeed: clemente: add Meta Clemente BMC
.../devicetree/bindings/arm/aspeed/aspeed.yaml | 1 +
arch/arm/boot/dts/aspeed/Makefile | 1 +
.../dts/aspeed/aspeed-bmc-facebook-clemente.dts | 1254 ++++++++++++++++++++
3 files changed, 1256 insertions(+)
---
base-commit: 52da431bf03b5506203bca27fe14a97895c80faf
change-id: 20250618-add-support-for-meta-clemente-bmc-941a469bc523
Best regards,
--
Leo Wang <leo.jt.wang@fii-foxconn.com>
^ permalink raw reply [flat|nested] 12+ messages in thread* [PATCH 1/2] Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml 2025-06-18 9:40 [PATCH 0/2] ARM: dts: Add support for Meta Clemente BMC Leo Wang @ 2025-06-18 9:40 ` Leo Wang 2025-06-20 6:25 ` Andrew Jeffery 2025-06-20 6:37 ` Krzysztof Kozlowski 2025-06-18 9:40 ` [PATCH 2/2] ARM: dts: aspeed: clemente: add Meta Clemente BMC Leo Wang 2025-06-18 13:36 ` [PATCH 0/2] ARM: dts: Add support for " Rob Herring (Arm) 2 siblings, 2 replies; 12+ messages in thread From: Leo Wang @ 2025-06-18 9:40 UTC (permalink / raw) To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley, Andrew Jeffery, Kees Cook, Tony Luck, Guilherme G. Piccoli, Geert Uytterhoeven, Magnus Damm Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel, linux-hardening, linux-renesas-soc, bruce.jy.hung, george.kw.lee, Leo Wang, Conor Dooley Document the new compatibles used on Meta Clemente. Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Leo Wang <leo.jt.wang@fii-foxconn.com> --- Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml index 01333ac111fbb076582a6c0e801903c3500b459f..ff3fea63cecd99ec2dc56d3cf71403f897681a98 100644 --- a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml +++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml @@ -81,6 +81,7 @@ properties: - asus,x4tf-bmc - facebook,bletchley-bmc - facebook,catalina-bmc + - facebook,clemente-bmc - facebook,cloudripper-bmc - facebook,elbert-bmc - facebook,fuji-bmc -- 2.43.0 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH 1/2] Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml 2025-06-18 9:40 ` [PATCH 1/2] Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml Leo Wang @ 2025-06-20 6:25 ` Andrew Jeffery 2025-06-20 6:37 ` Krzysztof Kozlowski 1 sibling, 0 replies; 12+ messages in thread From: Andrew Jeffery @ 2025-06-20 6:25 UTC (permalink / raw) To: Leo Wang, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley, Kees Cook, Tony Luck, Guilherme G. Piccoli, Geert Uytterhoeven, Magnus Damm Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel, linux-hardening, linux-renesas-soc, bruce.jy.hung, george.kw.lee, Leo Wang, Conor Dooley Hi Leo, The patch subject should not be the path to the affected file. Can you please fix that? Follow the lead of other patches that have recently touched the file. Thanks, Andrew On Wed, 2025-06-18 at 17:40 +0800, Leo Wang wrote: > Document the new compatibles used on Meta Clemente. > > Acked-by: Conor Dooley <conor.dooley@microchip.com> > Signed-off-by: Leo Wang <leo.jt.wang@fii-foxconn.com> > --- > Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml > b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml > index > 01333ac111fbb076582a6c0e801903c3500b459f..ff3fea63cecd99ec2dc56d3cf71 > 403f897681a98 100644 > --- a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml > +++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml > @@ -81,6 +81,7 @@ properties: > - asus,x4tf-bmc > - facebook,bletchley-bmc > - facebook,catalina-bmc > + - facebook,clemente-bmc > - facebook,cloudripper-bmc > - facebook,elbert-bmc > - facebook,fuji-bmc > ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/2] Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml 2025-06-18 9:40 ` [PATCH 1/2] Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml Leo Wang 2025-06-20 6:25 ` Andrew Jeffery @ 2025-06-20 6:37 ` Krzysztof Kozlowski 2025-06-20 6:51 ` Geert Uytterhoeven 1 sibling, 1 reply; 12+ messages in thread From: Krzysztof Kozlowski @ 2025-06-20 6:37 UTC (permalink / raw) To: Leo Wang, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley, Andrew Jeffery, Kees Cook, Tony Luck, Guilherme G. Piccoli, Geert Uytterhoeven, Magnus Damm Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel, linux-hardening, linux-renesas-soc, bruce.jy.hung, george.kw.lee, Leo Wang, Conor Dooley On 18/06/2025 11:40, Leo Wang wrote: > Document the new compatibles used on Meta Clemente. > > Acked-by: Conor Dooley <conor.dooley@microchip.com> How v1 with such subject could have been acked? Please provide lore links. Best regards, Krzysztof ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/2] Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml 2025-06-20 6:37 ` Krzysztof Kozlowski @ 2025-06-20 6:51 ` Geert Uytterhoeven 0 siblings, 0 replies; 12+ messages in thread From: Geert Uytterhoeven @ 2025-06-20 6:51 UTC (permalink / raw) To: Krzysztof Kozlowski Cc: Leo Wang, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley, Andrew Jeffery, Kees Cook, Tony Luck, Guilherme G. Piccoli, Geert Uytterhoeven, Magnus Damm, devicetree, linux-arm-kernel, linux-aspeed, linux-kernel, linux-hardening, linux-renesas-soc, bruce.jy.hung, george.kw.lee, Leo Wang, Conor Dooley On Fri, 20 Jun 2025 at 08:37, Krzysztof Kozlowski <krzk@kernel.org> wrote: > On 18/06/2025 11:40, Leo Wang wrote: > > Document the new compatibles used on Meta Clemente. > > > > Acked-by: Conor Dooley <conor.dooley@microchip.com> > How v1 with such subject could have been acked? The "real" v1 looked better ;-) > Please provide lore links. https://lore.kernel.org/all/68240d47.170a0220.ba589.0feb@mx.google.com Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 2/2] ARM: dts: aspeed: clemente: add Meta Clemente BMC 2025-06-18 9:40 [PATCH 0/2] ARM: dts: Add support for Meta Clemente BMC Leo Wang 2025-06-18 9:40 ` [PATCH 1/2] Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml Leo Wang @ 2025-06-18 9:40 ` Leo Wang 2025-06-20 6:39 ` Andrew Jeffery 2025-06-18 13:36 ` [PATCH 0/2] ARM: dts: Add support for " Rob Herring (Arm) 2 siblings, 1 reply; 12+ messages in thread From: Leo Wang @ 2025-06-18 9:40 UTC (permalink / raw) To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley, Andrew Jeffery, Kees Cook, Tony Luck, Guilherme G. Piccoli, Geert Uytterhoeven, Magnus Damm Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel, linux-hardening, linux-renesas-soc, bruce.jy.hung, george.kw.lee, Leo Wang Add linux device tree entry for Meta Clemente compute-tray BMC using AST2600 SoC. Signed-off-by: Leo Wang <leo.jt.wang@fii-foxconn.com> --- arch/arm/boot/dts/aspeed/Makefile | 1 + .../dts/aspeed/aspeed-bmc-facebook-clemente.dts | 1254 ++++++++++++++++++++ 2 files changed, 1255 insertions(+) diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile index 2e5f4833a073b6c25190fd4b6e89a11f9636fc84..904503f78f960d7bc14cad7cb455bb8bb3138ccd 100644 --- a/arch/arm/boot/dts/aspeed/Makefile +++ b/arch/arm/boot/dts/aspeed/Makefile @@ -19,6 +19,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-delta-ahe50dc.dtb \ aspeed-bmc-facebook-bletchley.dtb \ aspeed-bmc-facebook-catalina.dtb \ + aspeed-bmc-facebook-clemente.dtb \ aspeed-bmc-facebook-cmm.dtb \ aspeed-bmc-facebook-elbert.dtb \ aspeed-bmc-facebook-fuji.dtb \ diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts new file mode 100644 index 0000000000000000000000000000000000000000..ab5b37369d19a1e31fe74201fc5dc0011da2722f --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts @@ -0,0 +1,1254 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2021 Facebook Inc. +/dts-v1/; + +#include "aspeed-g6.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/usb/pd.h> +#include <dt-bindings/leds/leds-pca955x.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/i2c/i2c.h> + +/ { + model = "Facebook Clemente BMC"; + compatible = "facebook,clemente-bmc", "aspeed,ast2600"; + + aliases { + serial0 = &uart1; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + i2c16 = &i2c1mux0ch0; + i2c17 = &i2c1mux0ch1; + i2c18 = &i2c1mux0ch2; + i2c19 = &i2c1mux0ch3; + i2c20 = &i2c1mux0ch4; + i2c21 = &i2c1mux0ch5; + i2c22 = &i2c1mux0ch6; + i2c23 = &i2c1mux0ch7; + i2c24 = &i2c0mux0ch0; + i2c25 = &i2c0mux0ch1; + i2c26 = &i2c0mux0ch2; + i2c27 = &i2c0mux0ch3; + i2c28 = &i2c0mux1ch0; + i2c29 = &i2c0mux1ch1; + i2c30 = &i2c0mux1ch2; + i2c31 = &i2c0mux1ch3; + i2c32 = &i2c0mux2ch0; + i2c33 = &i2c0mux2ch1; + i2c34 = &i2c0mux2ch2; + i2c35 = &i2c0mux2ch3; + i2c36 = &i2c0mux3ch0; + i2c37 = &i2c0mux3ch1; + i2c38 = &i2c0mux3ch2; + i2c39 = &i2c0mux3ch3; + i2c40 = &i2c0mux4ch0; + i2c41 = &i2c0mux4ch1; + i2c42 = &i2c0mux4ch2; + i2c43 = &i2c0mux4ch3; + i2c44 = &i2c0mux5ch0; + i2c45 = &i2c0mux5ch1; + i2c46 = &i2c0mux5ch2; + i2c47 = &i2c0mux5ch3; + i2c48 = &i2c0mux0ch1mux0ch0; + i2c49 = &i2c0mux0ch1mux0ch1; + i2c50 = &i2c0mux0ch1mux0ch2; + i2c51 = &i2c0mux0ch1mux0ch3; + i2c52 = &i2c0mux3ch1mux0ch0; + i2c53 = &i2c0mux3ch1mux0ch1; + i2c54 = &i2c0mux3ch1mux0ch2; + i2c55 = &i2c0mux3ch1mux0ch3; + }; + + chosen { + stdout-path = "serial4:57600n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>, + <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>, + <&adc1 2>; + }; + + spi1_gpio: spi { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>; + miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>; + num-chipselects = <1>; + + tpm@0 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + spi-max-frequency = <33000000>; + reg = <0>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + label = "bmc_heartbeat_amber"; + gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + led-1 { + label = "fp_id_amber"; + default-state = "off"; + gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>; + }; + + led-2 { + label = "bmc_ready_noled"; + gpios = <&gpio0 ASPEED_GPIO(B, 3) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>; + }; + + led-3 { + label = "bmc_ready_cpld_noled"; + gpios = <&gpio0 ASPEED_GPIO(P, 5) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>; + }; + }; + + p1v8_bmc_aux: regulator-p1v8-bmc-aux { + compatible = "regulator-fixed"; + regulator-name = "p1v8_bmc_aux"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + p2v5_bmc_aux: regulator-p2v5-bmc-aux { + compatible = "regulator-fixed"; + regulator-name = "p2v5_bmc_aux"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + ramoops@b3e00000 { + compatible = "ramoops"; + reg = <0xbb000000 0x200000>; /* 16 * (4 * 0x8000) */ + record-size = <0x8000>; + console-size = <0x8000>; + ftrace-size = <0x8000>; + pmsg-size = <0x8000>; + max-reason = <3>; + }; + }; + +}; + +&udma { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&mac2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ncsi3_default>; + use-ncsi; +}; + +&mac3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ncsi4_default>; + use-ncsi; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-128.dtsi" + }; + flash@1 { + status = "okay"; + m25p,fast-read; + label = "alt-bmc"; + spi-max-frequency = <50000000>; + }; +}; + +&i2c0 { + status = "okay"; + + i2c-mux@71 { + compatible = "nxp,pca9546"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c0mux0ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + // IOB0 NIC0 TEMP + temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + }; + i2c0mux0ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + // HDD FRU EEPROM + eeprom@56 { + compatible = "atmel,24c128"; + reg = <0x56>; + }; + + // E1.S Backplane + i2c0mux0ch1mux0: i2c-mux@74 { + compatible = "nxp,pca9546"; + reg = <0x74>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c0mux0ch1mux0ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2c0mux0ch1mux0ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + i2c0mux0ch1mux0ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + i2c0mux0ch1mux0ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + }; + i2c0mux0ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + // IOB0 NIC1 TEMP + temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + }; + i2c0mux0ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + i2c-mux@72 { + compatible = "nxp,pca9546"; + reg = <0x72>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c0mux1ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2c0mux1ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + // IO Mezz 0 IOEXP + io_expander7: gpio@20 { + compatible = "nxp,pca9535"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + // IO Mezz 0 FRU EEPROM + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + // OSFP 0 FRU EEPROM + eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + }; + }; + i2c0mux1ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + i2c0mux1ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + i2c-mux@73 { + compatible = "nxp,pca9546"; + reg = <0x73>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c0mux2ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2c0mux2ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + i2c0mux2ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + i2c0mux2ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + i2c-mux@75 { + compatible = "nxp,pca9546"; + reg = <0x75>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c0mux3ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + // IOB1 NIC0 TEMP + temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + }; + i2c0mux3ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + // E1.S Backplane HDD FRU EEPROM + eeprom@56 { + compatible = "atmel,24c128"; + reg = <0x56>; + }; + + // E1.S Backplane MUX + i2c0mux3ch1mux0: i2c-mux@74 { + compatible = "nxp,pca9546"; + reg = <0x74>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c0mux3ch1mux0ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2c0mux3ch1mux0ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + i2c0mux3ch1mux0ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + i2c0mux3ch1mux0ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + }; + i2c0mux3ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + // IOB1 NIC1 TEMP + temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + }; + i2c0mux3ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + i2c-mux@76 { + compatible = "nxp,pca9546"; + reg = <0x76>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c0mux4ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2c0mux4ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + // IO Mezz 1 IOEXP + io_expander8: gpio@21 { + compatible = "nxp,pca9535"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + // IO Mezz 1 FRU EEPROM + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + // OSFP 1 FRU EEPROM + eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + }; + }; + i2c0mux4ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + i2c0mux4ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + i2c-mux@77 { + compatible = "nxp,pca9546"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c0mux5ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2c0mux5ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + i2c0mux5ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + i2c0mux5ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c1 { + status = "okay"; + + // Module 0 + fanctl0: fan-controller@20{ + compatible = "maxim,max31790"; + reg = <0x20>; + }; + + // Module 0 + fanctl1: fan-controller@23{ + compatible = "maxim,max31790"; + reg = <0x23>; + }; + + // Module 1 + fanctl2: fan-controller@2c{ + compatible = "maxim,max31790"; + reg = <0x2c>; + }; + + // Module 1 + fanctl3: fan-controller@2f{ + compatible = "maxim,max31790"; + reg = <0x2f>; + }; + + // Module 0 Leak Sensor + adc@48 { + compatible = "ti,ads1015"; + reg = <0x48>; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + ti,gain = <2>; + }; + + channel@1 { + reg = <1>; + ti,gain = <2>; + }; + + channel@2 { + reg = <2>; + ti,gain = <2>; + }; + + channel@3 { + reg = <3>; + ti,gain = <2>; + }; + }; + + // Module 1 Leak Sensor + adc@49 { + compatible = "ti,ads1015"; + reg = <0x49>; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + ti,gain = <2>; + }; + + channel@1 { + reg = <1>; + ti,gain = <2>; + }; + + channel@2 { + reg = <2>; + ti,gain = <2>; + }; + + channel@3 { + reg = <3>; + ti,gain = <2>; + }; + }; + + // PDB + power-monitor@12 { + compatible = "ti,lm5066i"; + reg = <0x12>; + }; + + // PDB + power-monitor@14 { + compatible = "ti,lm5066i"; + reg = <0x14>; + }; + + // PDB TEMP SENSOR + temperature-sensor@4e { + compatible = "ti,tmp1075"; + reg = <0x4e>; + }; + + // PDB FRU EEPROM + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + + // PDB + vrm@60 { + compatible = "renesas,raa228004"; + reg = <0x60>; + }; + + // PDB + vrm@61 { + compatible = "renesas,raa228004"; + reg = <0x61>; + }; + + // Interposer + i2c-mux@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + i2c1mux0ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + }; + i2c1mux0ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + }; + i2c1mux0ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + }; + i2c1mux0ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + }; + i2c1mux0ch4: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4>; + }; + i2c1mux0ch5: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x5>; + + // Interposer FRU EEPROM + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + }; + + // Interposer TEMP SENSOR + temperature-sensor@4f { + compatible = "ti,tmp75"; + reg = <0x4f>; + }; + }; + i2c1mux0ch6: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x6>; + + // Interposer IOEXP + io_expander5: gpio@27 { + compatible = "nxp,pca9554"; + reg = <0x27>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + i2c1mux0ch7: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x7>; + + // FIO FRU EEPROM + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + // FIO TEMP SENSOR + temperature-sensor@4b { + compatible = "ti,tmp75"; + reg = <0x4b>; + }; + }; + }; +}; + +&i2c2 { + status = "okay"; + // Module 0, Expander @0x20 + io_expander0: gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + // Module 1, Expander @0x21 + io_expander1: gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + // HMC Expander @0x27 + io_expander2: gpio@27 { + compatible = "nxp,pca9555"; + reg = <0x27>; + gpio-controller; + #gpio-cells = <2>; + }; + + // Module 0 Aux EEPROM + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + // Module 1 Aux EEPROM + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; + rtc@6f { + compatible = "nuvoton,nct3018y"; + reg = <0x6f>; + }; + + io_expander3: gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; + // SCM CPLD IOEXP + io_expander4: gpio@4f { + compatible = "nxp,pca9555"; + reg = <0x4f>; + gpio-controller; + #gpio-cells = <2>; + }; + + // SCM TEMP SENSOR BOARD + temperature-sensor@4b { + compatible = "national,lm75b"; + reg = <0x4b>; + }; + + // SCM FRU EEPROM + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + // BSM FRU EEPROM + eeprom@56 { + compatible = "atmel,24c64"; + reg = <0x56>; + }; +}; + +&i2c10 { + status = "okay"; + // OCP NIC0 TEMP + temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + + // OCP NIC0 FRU EEPROM + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; +}; + +&i2c11 { + status = "okay"; + ssif-bmc@10 { + compatible = "ssif-bmc"; + reg = <0x10>; + }; +}; + +&i2c12 { + status = "okay"; + multi-master; +}; + +&i2c13 { + status = "okay"; + multi-master; + + // HPM FRU EEPROM + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + // CBC 0 FRU + eeprom@54 { + compatible = "atmel,24c02"; + reg = <0x54>; + }; + // CBC 1 FRU + eeprom@55 { + compatible = "atmel,24c02"; + reg = <0x55>; + }; + // CBC 2 FRU + eeprom@56 { + compatible = "atmel,24c02"; + reg = <0x56>; + }; + // CBC 3 FRU + eeprom@58 { + compatible = "atmel,24c02"; + reg = <0x58>; + }; + // HMC FRU EEPROM + eeprom@57 { + compatible = "atmel,24c02"; + reg = <0x57>; + }; +}; + +&i2c14 { + status = "okay"; + + // PDB CPLD IOEXP 0x10 + io_expander9: gpio@10 { + compatible = "nxp,pca9555"; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; + reg = <0x10>; + gpio-controller; + #gpio-cells = <2>; + }; + + // PDB CPLD IOEXP 0x11 + io_expander10: gpio@11 { + compatible = "nxp,pca9555"; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; + reg = <0x11>; + gpio-controller; + #gpio-cells = <2>; + }; + + // PDB CPLD IOEXP 0x12 + io_expander11: gpio@12 { + compatible = "nxp,pca9555"; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; + reg = <0x12>; + gpio-controller; + #gpio-cells = <2>; + }; + + // PDB CPLD IOEXP 0x13 + io_expander12: gpio@13 { + compatible = "nxp,pca9555"; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; + reg = <0x13>; + gpio-controller; + #gpio-cells = <2>; + }; + + // PDB CPLD IOEXP 0x14 + io_expander13: gpio@14 { + compatible = "nxp,pca9555"; + reg = <0x14>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&i2c15 { + status = "okay"; + + // OCP NIC1 TEMP + temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + + // OCP NIC1 FRU EEPROM + eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + }; +}; + +&adc0 { + vref-supply = <&p1v8_bmc_aux>; + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default + &pinctrl_adc2_default &pinctrl_adc3_default + &pinctrl_adc4_default &pinctrl_adc5_default + &pinctrl_adc6_default &pinctrl_adc7_default>; +}; + +&adc1 { + vref-supply = <&p2v5_bmc_aux>; + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc10_default>; +}; + +&ehci0 { + status = "okay"; +}; + +&wdt1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; + aspeed,reset-type = "soc"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + aspeed,ext-pulse-duration = <256>; +}; + +&pinctrl { + pinctrl_ncsi3_default: ncsi3_default { + function = "RMII3"; + groups = "NCSI3"; + }; + + pinctrl_ncsi4_default: ncsi4_default { + function = "RMII4"; + groups = "NCSI4"; + }; +}; + +&gpio0 { + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "BATTERY_DETECT","PRSNT1_HPM_SCM_N", + "BMC_I2C1_FPGA_ALERT_L","BMC_READY", + "IOEXP_INT_L","FM_ID_LED", + "","", + /*C0-C7*/ "BMC_GPIOC0","","","", + "PMBUS_REQ_N","PSU_FW_UPDATE_REQ_N", + "","BMC_I2C_SSIF_ALERT_L", + /*D0-D7*/ "","","","","BMC_GPIOD4","","","", + /*E0-E7*/ "BMC_GPIOE0","BMC_GPIOE1","","","","","","", + /*F0-F7*/ "","","","","","","","", + /*G0-G7*/ "","","","","","", + "FM_DEBUG_PORT_PRSNT_N","FM_BMC_DBP_PRESENT_N", + /*H0-H7*/ "PWR_BRAKE_L","RUN_POWER_EN", + "SHDN_FORCE_L","SHDN_REQ_L", + "","","","", + /*I0-I7*/ "","","","", + "","FLASH_WP_STATUS", + "FM_PDB_HEALTH_N","RUN_POWER_PG", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "PCIE_EP_RST_EN","BMC_FRU_WP", + "SCM_HPM_STBY_RST_N","SCM_HPM_STBY_EN", + "STBY_POWER_PG_3V3","TH500_SHDN_OK_L","","", + /*N0-N7*/ "LED_POSTCODE_0","LED_POSTCODE_1", + "LED_POSTCODE_2","LED_POSTCODE_3", + "LED_POSTCODE_4","LED_POSTCODE_5", + "LED_POSTCODE_6","LED_POSTCODE_7", + /*O0-O7*/ "HMC_I2C3_FPGA_ALERT_L","FPGA_READY_HMC", + "CHASSIS_AC_LOSS_L","BSM_PRSNT_R_N", + "PSU_SMB_ALERT_L","FM_TPM_PRSNT_0_N", + "","USBDBG_IPMI_EN_L", + /*P0-P7*/ "PWR_BTN_BMC_N","IPEX_CABLE_PRSNT_L", + "ID_RST_BTN_BMC_N","RST_BMC_RSTBTN_OUT_N", + "host0-ready","BMC_READY_CPLD","BMC_GPIOP6","BMC_HEARTBEAT_N", + /*Q0-Q7*/ "IRQ_PCH_TPM_SPI_N","USB_OC0_REAR_R_N", + "UART_MUX_SEL","I2C_MUX_RESET_L", + "RSVD_NV_PLT_DETECT","SPI_TPM_INT_L", + "CPU_JTAG_MUX_SELECT","THERM_BB_OVERT_L", + /*R0-R7*/ "THERM_BB_WARN_L","SPI_BMC_FPGA_INT_L", + "CPU_BOOT_DONE","PMBUS_GNT_L", + "CHASSIS_PWR_BRK_L","PCIE_WAKE_L", + "PDB_THERM_OVERT_L","HMC_I2C2_FPGA_ALERT_L", + /*S0-S7*/ "","","SYS_BMC_PWRBTN_R_N","FM_TPM_PRSNT_1_N", + "FM_BMC_DEBUG_SW_N","UID_LED_N", + "SYS_FAULT_LED_N","RUN_POWER_FAULT_L", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "L2_RST_REQ_OUT_L","L0L1_RST_REQ_OUT_L", + "BMC_ID_BEEP_SEL","BMC_I2C0_FPGA_ALERT_L", + "SMB_BMC_TMP_ALERT","PWR_LED_N", + "SYS_RST_OUT_L","IRQ_TPM_SPI_N", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","RST_BMC_SELF_HW", + "FM_FLASH_LATCH_N","BMC_EMMC_RST_N", + "BMC_GPIOY4","BMC_GPIOY5","","", + /*Z0-Z7*/ "","","","","","","BMC_GPIOZ6","BMC_GPIOZ7"; +}; + +&gpio1 { + gpio-line-names = + /*18A0-18A7*/ "","","","","","","","", + /*18B0-18B3*/ "","","","", + /*18B4-18B7*/ "FM_BOARD_BMC_REV_ID0","FM_BOARD_BMC_REV_ID1","FM_BOARD_BMC_REV_ID2","", + /*18C0-18C7*/ "","","PI_BMC_BIOS_ROM_IRQ0_N","","","","","", + /*18D0-18D7*/ "","","","","","","","", + /*18E0-18E3*/ "","","","AC_PWR_BMC_BTN_N","","","",""; +}; + +&io_expander0 { + gpio-line-names = + "FPGA_THERM_OVERT_L-I", + "FPGA_READY_BMC-I", + "HMC_BMC_DETECT-O", + "HMC_PGOOD-O", + "", + "BMC_STBY_CYCLE-O", + "FPGA_EROT_FATAL_ERROR_L-I", + "WP_HW_EXT_CTRL_L-O", + "EROT_FPGA_RST_L-O", + "FPGA_EROT_RECOVERY_L-O", + "BMC_EROT_FPGA_SPI_MUX_SEL-O", + "USB2_HUB_RST_L-O", + "", + "SGPIO_EN_L-O", + "B2B_IOEXP_INT_L-I", + "I2C_BUS_MUX_RESET_L-O"; +}; + +&io_expander1 { + gpio-line-names = + "SEC_FPGA_THERM_OVERT_L", + "SEC_FPGA_READY_BMC", + "SEC_HMC_BMC_DETECT", + "SEC_HMC_PGOOD", + "", + "SEC_BMC_SELF_POWER_CYCLE", + "SEC_SEC_FPGA_EROT_FATAL_ERROR_L", + "SEC_WP_HW_EXT_CTRL_L", + "SEC_EROT_FPGA_RST_L", + "SEC_FPGA_EROT_RECOVERY_L", + "SEC_BMC_EROT_FPGA_SPI_MUX_SEL", + "SEC_USB2_HUB_RST_L", + "", + "SEC_SGPIO_EN_L", + "SEC_IOB_IOEXP_INT_L", + "SEC_I2C_BUS_MUX_RESET_L"; +}; + +&io_expander2 { + gpio-line-names = + "HMC_PRSNT_L-I", + "HMC_READY-I", + "HMC_EROT_FATAL_ERROR_L-I", + "I2C_MUX_SEL-O", + "HMC_EROT_SPI_MUX_SEL-O", + "HMC_EROT_RECOVERY_L-O", + "HMC_EROT_RST_L-O", + "GLOBAL_WP_HMC-O", + "FPGA_RST_L-O", + "USB2_HUB_RST-O", + "CPU_UART_MUX_SEL-O", + "", + "", + "", + "", + ""; +}; + +&io_expander3 { + gpio-line-names = + "RTC_MUX_SEL", + "PCI_MUX_SEL", + "TPM_MUX_SEL", + "FAN_MUX-SEL", + "SGMII_MUX_SEL", + "DP_MUX_SEL", + "UPHY3_USB_SEL", + "NCSI_MUX_SEL", + "BMC_PHY_RST", + "RTC_CLR_L", + "BMC_12V_CTRL", + "PS_RUN_IO0_PG", + "", + "", + "", + ""; +}; + +&io_expander4 { + gpio-line-names = + "stby_power_en_cpld","stby_power_gd_cpld","","", + "","","","", + "","","","", + "","","",""; +}; + +&io_expander5 { + gpio-line-names = + "JTAG_MUX_SEL","IOX_BMC_RESET","RTC_CLR_L","RTC_U77_ALRT_N", + "","PSU_ALERT_N","","RST_P12V_STBY_N"; +}; + +&io_expander7 { + gpio-line-names = + "RST_CX7_0","RST_CX7_1", + "CX0_SSD0_PRSNT_L","CX1_SSD1_PRSNT_L", + "CX_BOOT_CMPLT_CX0","CX_BOOT_CMPLT_CX1", + "CX_TWARN_CX0_L","CX_TWARN_CX1_L", + "CX_OVT_SHDN_CX0","CX_OVT_SHDN_CX1", + "FNP_L_CX0","FNP_L_CX1", + "","MCU_GPIO","MCU_RST_N","MCU_RECOVERY_N"; +}; + +&io_expander8 { + gpio-line-names = + "SEC_RST_CX7_0","SEC_RST_CX7_1", + "SEC_CX0_SSD0_PRSNT_L","SEC_CX1_SSD1_PRSNT_L", + "SEC_CX_BOOT_CMPLT_CX0","SEC_CX_BOOT_CMPLT_CX1", + "SEC_CX_TWARN_CX0_L","SEC_CX_TWARN_CX1_L", + "SEC_CX_OVT_SHDN_CX0","SEC_CX_OVT_SHDN_CX1", + "SEC_FNP_L_CX0","SEC_FNP_L_CX1", + "","SEC_MCU_GPIO","SEC_MCU_RST_N","SEC_MCU_RECOVERY_N"; +}; + +&io_expander9 { + gpio-line-names = + "wSequence_Latch_State_N","wP12V_N1N2_RUNTIME_FLT_N", + "wP12V_FAN_RUNTIME_FLT_N","wP12V_AUX_RUNTIME_FLT_N", + "wHost_PERST_SEQPWR_FLT_N","wP12V_N1N2_SEQPWR_FLT_N", + "wP12V_FAN_SEQPWR_FLT_N","wP12V_AUX_SEQPWR_FLT_N", + "wP12V_RUNTIME_FLT_NIC1_N","wAUX_RUNTIME_FLT_NIC1_N", + "wP12V_SEQPWR_FLT_NIC1_N","wAUX_SEQPWR_FLT_NIC1_N", + "wP12V_RUNTIME_FLT_NIC0_N","wAUX_RUNTIME_FLT_NIC0_N", + "wP12V_SEQPWR_FLT_NIC0_N","wAUX_SEQPWR_FLT_NIC0_N"; +}; + +&io_expander10 { + gpio-line-names = + "FM_P12V_NIC1_FLTB_R_N","FM_P3V3_NIC1_FAULT_R_N", + "FM_P12V_NIC0_FLTB_R_N","FM_P3V3_NIC0_FAULT_R_N", + "P48V_HS2_FAULT_N_PLD","P48V_HS1_FAULT_N_PLD", + "P12V_AUX_FAN_OC_PLD_N","P12V_AUX_FAN_FAULT_PLD_N", + "","", + "","", + "","FM_SYS_THROTTLE_N", + "OCP_V3_2_PWRBRK_FROM_HOST_ISO_PLD_N", + "OCP_SFF_PWRBRK_FROM_HOST_ISO_PLD_N"; +}; + +&io_expander11 { + gpio-line-names = + "P12V_AUX_PSU_SMB_ALERT_R_L","P12V_SCM_SENSE_ALERT_R_N", + "P12V_AUX_NIC1_SENSE_ALERT_R_N","P12V_AUX_NIC0_SENSE_ALERT_R_N", + "NODEB_PSU_SMB_ALERT_R_L","NODEA_PSU_SMB_ALERT_R_L", + "P12V_AUX_FAN_ALERT_PLD_N","P52V_SENSE_ALERT_PLD_N", + "PRSNT_RJ45_FIO_N_R","FM_MAIN_PWREN_RMC_EN_ISO_R", + "CHASSIS3_LEAK_Q_N_PLD","CHASSIS2_LEAK_Q_N_PLD", + "CHASSIS1_LEAK_Q_N_PLD","CHASSIS0_LEAK_Q_N_PLD", + "","SMB_RJ45_FIO_TMP_ALERT"; +}; + +&io_expander12 { + gpio-line-names = + "FAN_7_PRESENT_N","FAN_6_PRESENT_N", + "FAN_5_PRESENT_N","FAN_4_PRESENT_N", + "FAN_3_PRESENT_N","FAN_2_PRESENT_N", + "FAN_1_PRESENT_N","FAN_0_PRESENT_N", + "HP_LVC3_OCP_V3_2_PRSNT2_PLD_N","HP_LVC3_OCP_V3_1_PRSNT2_PLD_N", + "PRSNT_HDDBD_POWER_CABLE_N","PRSNT_OSFP0_POWER_CABLE_N", + "PRSNT_CHASSIS3_LEAK_CABLE_R_N","PRSNT_CHASSIS2_LEAK_CABLE_R_N", + "PRSNT_CHASSIS1_LEAK_CABLE_R_N","PRSNT_CHASSIS0_LEAK_CABLE_R_N"; +}; + +&io_expander13 { + gpio-line-names = + "rmc_en_dc_pwr_on","", + "","", + "","", + "","", + "leak_config_0","leak_config_1", + "leak_config_2","leak_config_3", + "mfg_led_test_mode_l","small_leak_err_inj", + "large_leak_err_inj",""; +}; + -- 2.43.0 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH 2/2] ARM: dts: aspeed: clemente: add Meta Clemente BMC 2025-06-18 9:40 ` [PATCH 2/2] ARM: dts: aspeed: clemente: add Meta Clemente BMC Leo Wang @ 2025-06-20 6:39 ` Andrew Jeffery 0 siblings, 0 replies; 12+ messages in thread From: Andrew Jeffery @ 2025-06-20 6:39 UTC (permalink / raw) To: Leo Wang, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley, Kees Cook, Tony Luck, Guilherme G. Piccoli, Geert Uytterhoeven, Magnus Damm Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel, linux-hardening, linux-renesas-soc, bruce.jy.hung, george.kw.lee, Leo Wang Hi Leo, On Wed, 2025-06-18 at 17:40 +0800, Leo Wang wrote: > Add linux device tree entry for Meta Clemente compute-tray > BMC using AST2600 SoC. > > Signed-off-by: Leo Wang <leo.jt.wang@fii-foxconn.com> > --- > arch/arm/boot/dts/aspeed/Makefile | 1 + > .../dts/aspeed/aspeed-bmc-facebook-clemente.dts | 1254 ++++++++++++++++++++ > 2 files changed, 1255 insertions(+) > > diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile > index 2e5f4833a073b6c25190fd4b6e89a11f9636fc84..904503f78f960d7bc14cad7cb455bb8bb3138ccd 100644 > --- a/arch/arm/boot/dts/aspeed/Makefile > +++ b/arch/arm/boot/dts/aspeed/Makefile > @@ -19,6 +19,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ > aspeed-bmc-delta-ahe50dc.dtb \ > aspeed-bmc-facebook-bletchley.dtb \ > aspeed-bmc-facebook-catalina.dtb \ > + aspeed-bmc-facebook-clemente.dtb \ > aspeed-bmc-facebook-cmm.dtb \ > aspeed-bmc-facebook-elbert.dtb \ > aspeed-bmc-facebook-fuji.dtb \ > diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts > new file mode 100644 > index 0000000000000000000000000000000000000000..ab5b37369d19a1e31fe74201fc5dc0011da2722f > --- /dev/null > +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts > @@ -0,0 +1,1254 @@ > *snip* > + // Interposer > + i2c-mux@70 { > + compatible = "nxp,pca9548"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x70>; > + i2c-mux-idle-disconnect; > + > + i2c1mux0ch0: i2c@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x0>; > + }; > + i2c1mux0ch1: i2c@1 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x1>; > + }; > + i2c1mux0ch2: i2c@2 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x2>; > + }; > + i2c1mux0ch3: i2c@3 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x3>; > + }; > + i2c1mux0ch4: i2c@4 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x4>; > + }; > + i2c1mux0ch5: i2c@5 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x5>; > + > + // Interposer FRU EEPROM > + eeprom@54 { > + compatible = "atmel,24c64"; > + reg = <0x54>; > + }; > + > + // Interposer TEMP SENSOR > + temperature-sensor@4f { > + compatible = "ti,tmp75"; > + reg = <0x4f>; > + }; The nodes up to here have been ordered nicely, but these two are backwards :) See: https://docs.kernel.org/devicetree/bindings/dts-coding-style.html#order-of-nodes > + }; > + i2c1mux0ch6: i2c@6 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x6>; > + > + // Interposer IOEXP > + io_expander5: gpio@27 { > + compatible = "nxp,pca9554"; > + reg = <0x27>; > + gpio-controller; > + #gpio-cells = <2>; > + }; > + }; > + i2c1mux0ch7: i2c@7 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x7>; > + > + // FIO FRU EEPROM > + eeprom@51 { > + compatible = "atmel,24c64"; > + reg = <0x51>; > + }; > + > + // FIO TEMP SENSOR > + temperature-sensor@4b { > + compatible = "ti,tmp75"; > + reg = <0x4b>; > + }; Again here. > + }; > + }; > +}; > + > +&i2c2 { > + status = "okay"; > + // Module 0, Expander @0x20 > + io_expander0: gpio@20 { > + compatible = "nxp,pca9555"; > + reg = <0x20>; > + gpio-controller; > + #gpio-cells = <2>; > + }; > + > + // Module 1, Expander @0x21 > + io_expander1: gpio@21 { > + compatible = "nxp,pca9555"; > + reg = <0x21>; > + gpio-controller; > + #gpio-cells = <2>; > + }; > + > + // HMC Expander @0x27 > + io_expander2: gpio@27 { > + compatible = "nxp,pca9555"; > + reg = <0x27>; > + gpio-controller; > + #gpio-cells = <2>; > + }; > + > + // Module 0 Aux EEPROM > + eeprom@50 { > + compatible = "atmel,24c64"; > + reg = <0x50>; > + }; > + > + // Module 1 Aux EEPROM > + eeprom@51 { > + compatible = "atmel,24c64"; > + reg = <0x51>; > + }; > +}; > + > +&i2c3 { > + status = "okay"; > +}; > + > +&i2c4 { > + status = "okay"; > +}; > + > +&i2c5 { > + status = "okay"; > +}; > + > +&i2c6 { > + status = "okay"; > + rtc@6f { > + compatible = "nuvoton,nct3018y"; > + reg = <0x6f>; > + }; > + > + io_expander3: gpio@21 { > + compatible = "nxp,pca9555"; > + reg = <0x21>; > + gpio-controller; > + #gpio-cells = <2>; > + }; Node ordering again. > +}; > + > +&i2c7 { > + status = "okay"; > +}; > + > +&i2c8 { > + status = "okay"; > +}; > + > +&i2c9 { > + status = "okay"; > + // SCM CPLD IOEXP > + io_expander4: gpio@4f { > + compatible = "nxp,pca9555"; > + reg = <0x4f>; > + gpio-controller; > + #gpio-cells = <2>; > + }; > + > + // SCM TEMP SENSOR BOARD > + temperature-sensor@4b { > + compatible = "national,lm75b"; > + reg = <0x4b>; > + }; Node order > + > + // SCM FRU EEPROM > + eeprom@50 { > + compatible = "atmel,24c64"; > + reg = <0x50>; > + }; > + > + // BSM FRU EEPROM > + eeprom@56 { > + compatible = "atmel,24c64"; > + reg = <0x56>; > + }; > +}; > + > +&i2c10 { > + status = "okay"; > + // OCP NIC0 TEMP > + temperature-sensor@1f { > + compatible = "ti,tmp421"; > + reg = <0x1f>; > + }; > + > + // OCP NIC0 FRU EEPROM > + eeprom@50 { > + compatible = "atmel,24c64"; > + reg = <0x50>; > + }; > +}; > + > +&i2c11 { > + status = "okay"; > + ssif-bmc@10 { > + compatible = "ssif-bmc"; > + reg = <0x10>; > + }; > +}; > + > +&i2c12 { > + status = "okay"; > + multi-master; > +}; > + > +&i2c13 { > + status = "okay"; > + multi-master; > + > + // HPM FRU EEPROM > + eeprom@50 { > + compatible = "atmel,24c64"; > + reg = <0x50>; > + }; > + // CBC 0 FRU > + eeprom@54 { > + compatible = "atmel,24c02"; > + reg = <0x54>; > + }; > + // CBC 1 FRU > + eeprom@55 { > + compatible = "atmel,24c02"; > + reg = <0x55>; > + }; > + // CBC 2 FRU > + eeprom@56 { > + compatible = "atmel,24c02"; > + reg = <0x56>; > + }; > + // CBC 3 FRU > + eeprom@58 { > + compatible = "atmel,24c02"; > + reg = <0x58>; > + }; > + // HMC FRU EEPROM > + eeprom@57 { > + compatible = "atmel,24c02"; > + reg = <0x57>; > + }; Hah, here too. > +}; > + > +&i2c14 { > + status = "okay"; > + > + // PDB CPLD IOEXP 0x10 > + io_expander9: gpio@10 { > + compatible = "nxp,pca9555"; > + interrupt-parent = <&gpio0>; > + interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; > + reg = <0x10>; > + gpio-controller; > + #gpio-cells = <2>; > + }; > + > + // PDB CPLD IOEXP 0x11 > + io_expander10: gpio@11 { > + compatible = "nxp,pca9555"; > + interrupt-parent = <&gpio0>; > + interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; > + reg = <0x11>; > + gpio-controller; > + #gpio-cells = <2>; > + }; > + > + // PDB CPLD IOEXP 0x12 > + io_expander11: gpio@12 { > + compatible = "nxp,pca9555"; > + interrupt-parent = <&gpio0>; > + interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; > + reg = <0x12>; > + gpio-controller; > + #gpio-cells = <2>; > + }; > + > + // PDB CPLD IOEXP 0x13 > + io_expander12: gpio@13 { > + compatible = "nxp,pca9555"; > + interrupt-parent = <&gpio0>; > + interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; > + reg = <0x13>; > + gpio-controller; > + #gpio-cells = <2>; > + }; > + > + // PDB CPLD IOEXP 0x14 > + io_expander13: gpio@14 { > + compatible = "nxp,pca9555"; > + reg = <0x14>; > + gpio-controller; > + #gpio-cells = <2>; > + }; > +}; > + > +&i2c15 { > + status = "okay"; > + > + // OCP NIC1 TEMP > + temperature-sensor@1f { > + compatible = "ti,tmp421"; > + reg = <0x1f>; > + }; > + > + // OCP NIC1 FRU EEPROM > + eeprom@52 { > + compatible = "atmel,24c64"; > + reg = <0x52>; > + }; > +}; > + Can you order these top-level references alphabetically as per the dts coding style (e.g. the i2c nodes above should be ordered (well) after the adc nodes below)? > +&adc0 { > + vref-supply = <&p1v8_bmc_aux>; > + status = "okay"; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default > + &pinctrl_adc2_default &pinctrl_adc3_default > + &pinctrl_adc4_default &pinctrl_adc5_default > + &pinctrl_adc6_default &pinctrl_adc7_default>; > +}; > + *snip* Andrew ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 0/2] ARM: dts: Add support for Meta Clemente BMC 2025-06-18 9:40 [PATCH 0/2] ARM: dts: Add support for Meta Clemente BMC Leo Wang 2025-06-18 9:40 ` [PATCH 1/2] Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml Leo Wang 2025-06-18 9:40 ` [PATCH 2/2] ARM: dts: aspeed: clemente: add Meta Clemente BMC Leo Wang @ 2025-06-18 13:36 ` Rob Herring (Arm) 2 siblings, 0 replies; 12+ messages in thread From: Rob Herring (Arm) @ 2025-06-18 13:36 UTC (permalink / raw) To: Leo Wang Cc: Conor Dooley, Guilherme G. Piccoli, linux-aspeed, Andrew Jeffery, Conor Dooley, Tony Luck, Krzysztof Kozlowski, Magnus Damm, george.kw.lee, Leo Wang, Joel Stanley, devicetree, linux-arm-kernel, Geert Uytterhoeven, bruce.jy.hung, Kees Cook, linux-renesas-soc, linux-kernel, linux-hardening On Wed, 18 Jun 2025 17:40:01 +0800, Leo Wang wrote: > This series adds initial support for the Meta Clemente BMC based on the ASPEED AST2600 SoC. > > Patch 1 documents the compatible string. > Patch 2 adds the device tree for the board. > > Signed-off-by: Leo Wang <leo.jt.wang@fii-foxconn.com> > --- > Leo Wang (2): > Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml > ARM: dts: aspeed: clemente: add Meta Clemente BMC > > .../devicetree/bindings/arm/aspeed/aspeed.yaml | 1 + > arch/arm/boot/dts/aspeed/Makefile | 1 + > .../dts/aspeed/aspeed-bmc-facebook-clemente.dts | 1254 ++++++++++++++++++++ > 3 files changed, 1256 insertions(+) > --- > base-commit: 52da431bf03b5506203bca27fe14a97895c80faf > change-id: 20250618-add-support-for-meta-clemente-bmc-941a469bc523 > > Best regards, > -- > Leo Wang <leo.jt.wang@fii-foxconn.com> > > > My bot found new DTB warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade This patch series was applied (using b4) to base: Base: using specified base-commit 52da431bf03b5506203bca27fe14a97895c80faf If this is not the correct base, please add 'base-commit' tag (or use b4 which does this automatically) New warnings running 'make CHECK_DTBS=y for arch/arm/boot/dts/aspeed/' for 20250618-add-support-for-meta-clemente-bmc-v1-0-e5ca669ee47b@fii-foxconn.com: arch/arm/boot/dts/aspeed/aspeed-ast2500-evb.dtb: /ahb/apb/timer@1e782000: failed to match any schema with compatible: ['aspeed,ast2400-timer'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: fsi@1e79b000 (aspeed,ast2600-fsi-master): compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yamp.dtb: /ahb/apb/syscon@1e6e2000/p2a-control@2c: failed to match any schema with compatible: ['aspeed,ast2500-p2a-ctrl'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: timer (arm,armv7-timer): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/timer/arm,arch_timer.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /sdram@1e6e0000: failed to match any schema with compatible: ['aspeed,ast2600-sdram-edac', 'syscon'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: bus@1e600000 (aspeed,ast2600-ahbc): compatible: ['aspeed,ast2600-ahbc', 'syscon'] is too long from schema $id: http://devicetree.org/schemas/bus/aspeed,ast2600-ahbc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: syscon@1e6e2000 (aspeed,ast2600-scu): 'smp-memram@180' does not match any of the regexes: '^interrupt-controller@[0-9a-f]+$', '^p2a-control@[0-9a-f]+$', '^pinctrl(@[0-9a-f]+)?$', '^pinctrl-[0-9]+$', '^silicon-id@[0-9a-f]+$' from schema $id: http://devicetree.org/schemas/mfd/aspeed,ast2x00-scu.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /ahb/apb/syscon@1e6e2000/smp-memram@180: failed to match any schema with compatible: ['aspeed,ast2600-smpmem'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /ahb/apb/display@1e6e6000: failed to match any schema with compatible: ['aspeed,ast2600-gfx', 'syscon'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: adc@1e6e9000 (aspeed,ast2600-adc0): 'interrupts' does not match any of the regexes: '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: adc@1e6e9100 (aspeed,ast2600-adc1): 'interrupts' does not match any of the regexes: '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: crypto@1e6fa000 (aspeed,ast2600-acry): 'aspeed,ahbc' does not match any of the regexes: '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/crypto/aspeed,ast2600-acry.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /ahb/apb/timer@1e782000: failed to match any schema with compatible: ['aspeed,ast2600-timer'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: lpc@1e789000 (aspeed,ast2600-lpc-v2): reg-io-width: 4 is not of type 'object' from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: lpc@1e789000 (aspeed,ast2600-lpc-v2): lpc-snoop@80: 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: kcs@24 (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: kcs@28 (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: kcs@2c (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: kcs@114 (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /ahb/apb/lpc@1e789000/lhc@a0: failed to match any schema with compatible: ['aspeed,ast2600-lhc'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /ahb/apb/lpc@1e789000/ibt@140: failed to match any schema with compatible: ['aspeed,ast2600-ibt-bmc'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: sdc@1e740000 (aspeed,ast2600-sd-controller): sdhci@1e740100:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: sdc@1e740000 (aspeed,ast2600-sd-controller): sdhci@1e740200:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740100: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740200: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: fsi@1e79b000 (aspeed,ast2600-fsi-master): compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /ahb/apb/fsi@1e79b000: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: fsi@1e79b100 (aspeed,ast2600-fsi-master): compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /ahb/apb/fsi@1e79b100: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /ahb/apb/dma-controller@1e79e000: failed to match any schema with compatible: ['aspeed,ast2600-udma'] ^ permalink raw reply [flat|nested] 12+ messages in thread
[parent not found: <20250513031010.267994-1-LeoWang>]
* [PATCH 2/2] ARM: dts: aspeed: clemente: add Meta Clemente BMC [not found] <20250513031010.267994-1-LeoWang> @ 2025-05-13 3:10 ` leo.jt.wang 2025-05-13 7:44 ` Krzysztof Kozlowski ` (2 more replies) 0 siblings, 3 replies; 12+ messages in thread From: leo.jt.wang @ 2025-05-13 3:10 UTC (permalink / raw) To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley, Andrew Jeffery Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel, george.kw.lee, leo.jt.wang From: Leo Wang <leo.jt.wang@fii-foxconn.com> Add linux device tree entry for Meta Clemente compute-tray BMC using AST2600 SoC. Signed-off-by: Leo Wang <leo.jt.wang@fii-foxconn.com> --- arch/arm/boot/dts/aspeed/Makefile | 1 + .../aspeed/aspeed-bmc-facebook-clemente.dts | 1269 +++++++++++++++++ 2 files changed, 1270 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile index b3170fdd3096..9d0a465cbb36 100644 --- a/arch/arm/boot/dts/aspeed/Makefile +++ b/arch/arm/boot/dts/aspeed/Makefile @@ -19,6 +19,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-delta-ahe50dc.dtb \ aspeed-bmc-facebook-bletchley.dtb \ aspeed-bmc-facebook-catalina.dtb \ + aspeed-bmc-facebook-clemente.dtb \ aspeed-bmc-facebook-cmm.dtb \ aspeed-bmc-facebook-elbert.dtb \ aspeed-bmc-facebook-fuji.dtb \ diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts new file mode 100644 index 000000000000..0313150841e1 --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts @@ -0,0 +1,1269 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2021 Facebook Inc. +/dts-v1/; + +#include "aspeed-g6.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/usb/pd.h> +#include <dt-bindings/leds/leds-pca955x.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/i2c/i2c.h> + +/ { + model = "Facebook Clemente BMC"; + compatible = "facebook,clemente-bmc", "aspeed,ast2600"; + + aliases { + serial0 = &uart1; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + i2c16 = &i2c1mux0ch0; + i2c17 = &i2c1mux0ch1; + i2c18 = &i2c1mux0ch2; + i2c19 = &i2c1mux0ch3; + i2c20 = &i2c1mux0ch4; + i2c21 = &i2c1mux0ch5; + i2c22 = &i2c1mux0ch6; + i2c23 = &i2c1mux0ch7; + i2c24 = &i2c0mux0ch0; + i2c25 = &i2c0mux0ch1; + i2c26 = &i2c0mux0ch2; + i2c27 = &i2c0mux0ch3; + i2c28 = &i2c0mux1ch0; + i2c29 = &i2c0mux1ch1; + i2c30 = &i2c0mux1ch2; + i2c31 = &i2c0mux1ch3; + i2c32 = &i2c0mux2ch0; + i2c33 = &i2c0mux2ch1; + i2c34 = &i2c0mux2ch2; + i2c35 = &i2c0mux2ch3; + i2c36 = &i2c0mux3ch0; + i2c37 = &i2c0mux3ch1; + i2c38 = &i2c0mux3ch2; + i2c39 = &i2c0mux3ch3; + i2c40 = &i2c0mux4ch0; + i2c41 = &i2c0mux4ch1; + i2c42 = &i2c0mux4ch2; + i2c43 = &i2c0mux4ch3; + i2c44 = &i2c0mux5ch0; + i2c45 = &i2c0mux5ch1; + i2c46 = &i2c0mux5ch2; + i2c47 = &i2c0mux5ch3; + i2c48 = &i2c5mux0ch0; + i2c49 = &i2c5mux0ch1; + i2c50 = &i2c5mux0ch2; + i2c51 = &i2c5mux0ch3; + i2c52 = &i2c5mux0ch4; + i2c53 = &i2c5mux0ch5; + i2c54 = &i2c5mux0ch6; + i2c55 = &i2c5mux0ch7; + }; + + chosen { + stdout-path = "serial4:57600n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>, + <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>, + <&adc1 2>; + }; + + spi1_gpio: spi { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>; + miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>; + num-chipselects = <1>; + + tpm@0 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + spi-max-frequency = <33000000>; + reg = <0>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + label = "bmc_heartbeat_amber"; + gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + led-1 { + label = "fp_id_amber"; + default-state = "off"; + gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>; + }; + + led-2 { + label = "bmc_ready_noled"; + gpios = <&gpio0 ASPEED_GPIO(B, 3) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>; + }; + + led-3 { + label = "bmc_ready_cpld_noled"; + gpios = <&gpio0 ASPEED_GPIO(P, 5) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>; + }; + }; + + p1v8_bmc_aux: regulator-p1v8-bmc-aux { + compatible = "regulator-fixed"; + regulator-name = "p1v8_bmc_aux"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + p2v5_bmc_aux: regulator-p2v5-bmc-aux { + compatible = "regulator-fixed"; + regulator-name = "p2v5_bmc_aux"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + ramoops@b3e00000 { + compatible = "ramoops"; + reg = <0xbb000000 0x200000>; /* 16 * (4 * 0x8000) */ + record-size = <0x8000>; + console-size = <0x8000>; + ftrace-size = <0x8000>; + pmsg-size = <0x8000>; + max-reason = <3>; + }; + }; + +}; + +&udma { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart3 { + compatible = "aspeed,ast2600-uart"; + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&mdio0 { + status = "okay"; + ethphy0: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + +&mac0 { + status = "disabled"; + /* phy-mode = "rgmii-rxid"; */ + phy-handle = <ðphy0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii1_default>; +}; + +&mac2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ncsi3_default>; + use-ncsi; + ncsi-ctrl,start-redo-probe; + ncsi-package = <1>; +}; + +&mac3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ncsi4_default>; + use-ncsi; + ncsi-ctrl,start-redo-probe; + ncsi-package = <2>; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-128.dtsi" + }; + flash@1 { + status = "okay"; + m25p,fast-read; + label = "alt-bmc"; + spi-max-frequency = <50000000>; + }; +}; + +&i2c0 { + status = "okay"; + + i2c-mux@71 { + compatible = "nxp,pca9546"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c0mux0ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + // IOB0 NIC0 TEMP + temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + }; + i2c0mux0ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + i2c0mux0ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + // IOB0 NIC1 TEMP + temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + }; + i2c0mux0ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + i2c-mux@72 { + compatible = "nxp,pca9546"; + reg = <0x72>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c0mux1ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2c0mux1ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + // IO Mezz 0 IOEXP + io_expander7: gpio@21 { + compatible = "nxp,pca9535"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + // IO Mezz 0 FRU EEPROM + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + i2c0mux1ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + i2c0mux1ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + i2c-mux@73 { + compatible = "nxp,pca9546"; + reg = <0x73>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c0mux2ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2c0mux2ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + i2c0mux2ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + i2c0mux2ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + i2c-mux@75 { + compatible = "nxp,pca9546"; + reg = <0x75>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c0mux3ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + // IOB1 NIC0 TEMP + temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + }; + i2c0mux3ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + i2c0mux3ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + // IOB1 NIC1 TEMP + temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + }; + i2c0mux3ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + i2c-mux@76 { + compatible = "nxp,pca9546"; + reg = <0x76>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c0mux4ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2c0mux4ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + // IO Mezz 1 IOEXP + io_expander8: gpio@21 { + compatible = "nxp,pca9535"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + // IO Mezz 1 FRU EEPROM + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + i2c0mux4ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + i2c0mux4ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + i2c-mux@77 { + compatible = "nxp,pca9546"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c0mux5ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2c0mux5ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + i2c0mux5ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + i2c0mux5ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c1 { + status = "okay"; + + // HSC + power-monitor@12 { + compatible = "ti,lm5066i"; + reg = <0x12>; + }; + + // HSC + power-monitor@14 { + compatible = "ti,lm5066i"; + reg = <0x14>; + }; + + // HSC TEMP SENSOR + temperature-sensor@4a { + compatible = "ti,tmp461"; + reg = <0x4a>; + }; + + // HSC FRU EEPROM + eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + }; + + // CPU0 Leak sensor MAX1363 + Leak-sensor@34 { + compatible = "maxim,max1363"; + reg = <0x34>; + }; + + // CPU1 Leak sensor MAX1363 + Leak-sensor@35 { + compatible = "maxim,max1363"; + reg = <0x35>; + }; + + i2c-mux@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + i2c1mux0ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + power-sensor@22 { + compatible = "mps,mp5990"; + reg = <0x22>; + }; + }; + i2c1mux0ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + }; + i2c1mux0ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + fanctl0: fan-controller@21{ + compatible = "maxim,max31790"; + reg = <0x21>; + #address-cells = <1>; + #size-cells = <0>; + channel@2 { + reg = <2>; + sensor-type = "TACH"; + }; + channel@5 { + reg = <5>; + sensor-type = "TACH"; + }; + }; + fanctl1: fan-controller@27{ + compatible = "maxim,max31790"; + reg = <0x27>; + #address-cells = <1>; + #size-cells = <0>; + channel@2 { + reg = <2>; + sensor-type = "TACH"; + }; + channel@5 { + reg = <5>; + sensor-type = "TACH"; + }; + }; + }; + i2c1mux0ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + }; + i2c1mux0ch4: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4>; + }; + i2c1mux0ch5: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x5>; + + // PDB FRU EEPROM + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + }; + + // PDB TEMP SENSOR + temperature-sensor@4f { + compatible = "ti,tmp75"; + reg = <0x4f>; + }; + }; + i2c1mux0ch6: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x6>; + + // PDB IOEXP + io_expander5: gpio@27 { + compatible = "nxp,pca9554"; + reg = <0x27>; + gpio-controller; + #gpio-cells = <2>; + }; + + // OSFP IOEXP + io_expander6: gpio@25 { + compatible = "nxp,pca9555"; + reg = <0x25>; + gpio-controller; + #gpio-cells = <2>; + }; + + // OSFP FRU EEPROM + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + }; + i2c1mux0ch7: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x7>; + + // FIO FRU EEPROM + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + // FIO TEMP SENSOR + temperature-sensor@4b { + compatible = "ti,tmp75"; + reg = <0x4b>; + }; + }; + }; +}; + +&i2c2 { + status = "okay"; + + // Module 0, Expander @0x20 + io_expander0: gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + // Module 1, Expander @0x21 + io_expander1: gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + // HMC Expander @0x27 + io_expander2: gpio@27 { + compatible = "nxp,pca9555"; + reg = <0x27>; + gpio-controller; + #gpio-cells = <2>; + }; + + // HMC Expander @0x74 + io_expander3: gpio@74 { + compatible = "nxp,pca9555"; + reg = <0x74>; + gpio-controller; + #gpio-cells = <2>; + }; + + // Module 0 Aux EEPROM + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + // Module 1 Aux EEPROM + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; +}; + +&i2c3 { + status = "okay"; + +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; + + rtc@6f { + compatible = "nuvoton,nct3018y"; + reg = <0x6f>; + }; + + // Interposer board EEPROM + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; +}; + +&i2c7 { + status = "okay"; + bus-frequency = <100000>; + multi-master; + aspeed,hw-timeout-ms = <1000>; + + //USB Debug Connector + ipmb@10 { + compatible = "ipmb-dev"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + i2c-protocol; + }; +}; + +&i2c8 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; + + // SCM CPLD IOEXP + io_expander4: gpio@4f { + compatible = "nxp,pca9555"; + reg = <0x4f>; + gpio-controller; + #gpio-cells = <2>; + }; + + // SCM TEMP SENSOR BOARD + temperature-sensor@4b { + compatible = "national,lm75b"; + reg = <0x4b>; + }; + + // SCM FRU EEPROM + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + // BSM FRU EEPROM + eeprom@56 { + compatible = "atmel,24c64"; + reg = <0x56>; + }; +}; + +&i2c10 { + status = "okay"; + + // OCP NIC0 TEMP + temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + + // OCP NIC0 FRU EEPROM + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; +}; + +&i2c11 { + status = "okay"; + + ssif-bmc@10 { + compatible = "ssif-bmc"; + reg = <0x10>; + alert-gpios = <&gpio0 ASPEED_GPIO(C, 7) GPIO_ACTIVE_LOW>; + timeout-ms = <5000>; + }; +}; + +&i2c12 { + status = "okay"; + multi-master; + + i2c-mux@70 { + compatible = "nxp,pca9548"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c5mux0ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2c5mux0ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + i2c5mux0ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + i2c5mux0ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + i2c5mux0ch4: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + i2c5mux0ch5: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + i2c5mux0ch6: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + // HDD FRU EEPROM + eeprom@56 { + compatible = "atmel,24c64"; + reg = <0x56>; + }; + }; + i2c5mux0ch7: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + + power-sensor@40 { + compatible = "ti,ina230"; + reg = <0x40>; + shunt-resistor = <2000>; + }; + power-sensor@41 { + compatible = "ti,ina230"; + reg = <0x41>; + shunt-resistor = <2000>; + }; + power-sensor@44 { + compatible = "ti,ina230"; + reg = <0x44>; + shunt-resistor = <2000>; + }; + power-sensor@49 { + compatible = "ti,ina230"; + reg = <0x49>; + shunt-resistor = <2000>; + }; + }; + }; +}; + +&i2c13 { + status = "okay"; + multi-master; + + // HPM FRU EEPROM + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + // CBC 0 FRU + eeprom@54 { + compatible = "atmel,24c02"; + reg = <0x54>; + }; + // CBC 1 FRU + eeprom@55 { + compatible = "atmel,24c02"; + reg = <0x55>; + }; + // CBC 2 FRU + eeprom@56 { + compatible = "atmel,24c02"; + reg = <0x56>; + }; + // CBC 3 FRU + eeprom@58 { + compatible = "atmel,24c02"; + reg = <0x58>; + }; + // HMC FRU EEPROM + eeprom@57 { + compatible = "atmel,24c02"; + reg = <0x57>; + }; +}; + +&i2c14 { + status = "okay"; + + // PDB CPLD IOEXP 0x10 + io_expander9: gpio@10 { + compatible = "nxp,pca9555"; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; + reg = <0x10>; + gpio-controller; + #gpio-cells = <2>; + }; + + // PDB CPLD IOEXP 0x11 + io_expander10: gpio@11 { + compatible = "nxp,pca9555"; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; + reg = <0x11>; + gpio-controller; + #gpio-cells = <2>; + }; + + // PDB CPLD IOEXP 0x12 + io_expander11: gpio@12 { + compatible = "nxp,pca9555"; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; + reg = <0x12>; + gpio-controller; + #gpio-cells = <2>; + }; + + // PDB CPLD IOEXP 0x13 + io_expander12: gpio@13 { + compatible = "nxp,pca9555"; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; + reg = <0x13>; + gpio-controller; + #gpio-cells = <2>; + }; + + // PDB CPLD IOEXP 0x14 + io_expander13: gpio@14 { + compatible = "nxp,pca9555"; + reg = <0x14>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&i2c15 { + status = "okay"; + + // OCP NIC1 TEMP + temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + + // OCP NIC1 FRU EEPROM + eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + }; +}; + +&adc0 { + vref-supply = <&p1v8_bmc_aux>; + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default + &pinctrl_adc2_default &pinctrl_adc3_default + &pinctrl_adc4_default &pinctrl_adc5_default + &pinctrl_adc6_default &pinctrl_adc7_default>; +}; + +&adc1 { + vref-supply = <&p2v5_bmc_aux>; + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc10_default>; +}; + +&ehci0 { + status = "okay"; +}; + +&wdt1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; + aspeed,reset-type = "soc"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + aspeed,ext-pulse-duration = <256>; +}; + +&pinctrl { + pinctrl_ncsi3_default: ncsi3_default { + function = "RMII3"; + groups = "NCSI3"; + }; + + pinctrl_ncsi4_default: ncsi4_default { + function = "RMII4"; + groups = "NCSI4"; + }; +}; + +&gpio0 { + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "BATTERY_DETECT","PRSNT1_HPM_SCM_N", + "BMC_I2C1_FPGA_ALERT_L","BMC_READY", + "IOEXP_INT_L","FM_ID_LED", + "","", + /*C0-C7*/ "BMC_GPIOC0","","","", + "PMBUS_REQ_N","PSU_FW_UPDATE_REQ_N", + "","BMC_I2C_SSIF_ALERT_L", + /*D0-D7*/ "","","","","BMC_GPIOD4","","","", + /*E0-E7*/ "BMC_GPIOE0","BMC_GPIOE1","","","","","","", + /*F0-F7*/ "","","","","","","","", + /*G0-G7*/ "","","","","","", + "FM_DEBUG_PORT_PRSNT_N","FM_BMC_DBP_PRESENT_N", + /*H0-H7*/ "PWR_BRAKE_L","RUN_POWER_EN", + "SHDN_FORCE_L","SHDN_REQ_L", + "","","","", + /*I0-I7*/ "","","","", + "","FLASH_WP_STATUS", + "FM_PDB_HEALTH_N","RUN_POWER_PG", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "PCIE_EP_RST_EN","BMC_FRU_WP", + "SCM_HPM_STBY_RST_N","SCM_HPM_STBY_EN", + "STBY_POWER_PG_3V3","TH500_SHDN_OK_L","","", + /*N0-N7*/ "LED_POSTCODE_0","LED_POSTCODE_1", + "LED_POSTCODE_2","LED_POSTCODE_3", + "LED_POSTCODE_4","LED_POSTCODE_5", + "LED_POSTCODE_6","LED_POSTCODE_7", + /*O0-O7*/ "HMC_I2C3_FPGA_ALERT_L","FPGA_READY_HMC", + "CHASSIS_AC_LOSS_L","BSM_PRSNT_R_N", + "PSU_SMB_ALERT_L","FM_TPM_PRSNT_0_N", + "","USBDBG_IPMI_EN_L", + /*P0-P7*/ "PWR_BTN_BMC_N","IPEX_CABLE_PRSNT_L", + "ID_RST_BTN_BMC_N","RST_BMC_RSTBTN_OUT_N", + "host0-ready","BMC_READY_CPLD","BMC_GPIOP6","BMC_HEARTBEAT_N", + /*Q0-Q7*/ "IRQ_PCH_TPM_SPI_N","USB_OC0_REAR_R_N", + "UART_MUX_SEL","I2C_MUX_RESET_L", + "RSVD_NV_PLT_DETECT","SPI_TPM_INT_L", + "CPU_JTAG_MUX_SELECT","THERM_BB_OVERT_L", + /*R0-R7*/ "THERM_BB_WARN_L","SPI_BMC_FPGA_INT_L", + "CPU_BOOT_DONE","PMBUS_GNT_L", + "CHASSIS_PWR_BRK_L","PCIE_WAKE_L", + "PDB_THERM_OVERT_L","HMC_I2C2_FPGA_ALERT_L", + /*S0-S7*/ "","","SYS_BMC_PWRBTN_R_N","FM_TPM_PRSNT_1_N", + "FM_BMC_DEBUG_SW_N","UID_LED_N", + "SYS_FAULT_LED_N","RUN_POWER_FAULT_L", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "L2_RST_REQ_OUT_L","L0L1_RST_REQ_OUT_L", + "BMC_ID_BEEP_SEL","BMC_I2C0_FPGA_ALERT_L", + "SMB_BMC_TMP_ALERT","PWR_LED_N", + "SYS_RST_OUT_L","IRQ_TPM_SPI_N", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","RST_BMC_SELF_HW", + "FM_FLASH_LATCH_N","BMC_EMMC_RST_N", + "BMC_GPIOY4","BMC_GPIOY5","","", + /*Z0-Z7*/ "","","","","","","BMC_GPIOZ6","BMC_GPIOZ7"; +}; + +&gpio1 { + gpio-line-names = + /*18A0-18A7*/ "","","","","","","","", + /*18B0-18B3*/ "","","","", + /*18B4-18B7*/ "FM_BOARD_BMC_REV_ID0","FM_BOARD_BMC_REV_ID1","FM_BOARD_BMC_REV_ID2","", + /*18C0-18C7*/ "","","PI_BMC_BIOS_ROM_IRQ0_N","","","","","", + /*18D0-18D7*/ "","","","","","","","", + /*18E0-18E3*/ "","","","AC_PWR_BMC_BTN_N","","","",""; +}; + +&io_expander0 { + gpio-line-names = + "FPGA_THERM_OVERT_L-I", + "FPGA_READY_BMC-I", + "HMC_BMC_DETECT-O", + "HMC_PGOOD-O", + "", + "BMC_STBY_CYCLE-O", + "FPGA_EROT_FATAL_ERROR_L-I", + "WP_HW_EXT_CTRL_L-O", + "EROT_FPGA_RST_L-O", + "FPGA_EROT_RECOVERY_L-O", + "BMC_EROT_FPGA_SPI_MUX_SEL-O", + "USB2_HUB_RST_L-O", + "", + "SGPIO_EN_L-O", + "B2B_IOEXP_INT_L-I", + "I2C_BUS_MUX_RESET_L-O"; +}; + +&io_expander1 { + gpio-line-names = + "USB_MUX_SEL_N-O", + "", + "MCIO_PCIE_DISABLE_L-O", + "USB_PCIE_DISABLE_L-O", + "PEX_SW_PCIE_DISABLE_L-O", + "HSC_CARD_PRSNT_N-I", + "TPM_MUX_3V3_SEL_OUT_N-O", + "USB2_HUB4_RST_L-O", + "PCI_MUX_SEL-O", + "TPM_MUX_SEL-O", + "IOEXP_BMC_PHY_RST_N-O", + "IOEXP_RTC_CLR_L-O", + "BMC_12V_CTRL-O", + "PS_RUN_IO0_PG-I", + "", + ""; +}; + +&io_expander2 { + gpio-line-names = + "HMC_PRSNT_L-I", + "HMC_READY-I", + "HMC_EROT_FATAL_ERROR_L-I", + "I2C_MUX_SEL-O", + "HMC_EROT_SPI_MUX_SEL-O", + "HMC_EROT_RECOVERY_L-O", + "HMC_EROT_RST_L-O", + "GLOBAL_WP_HMC-O", + "FPGA_RST_L-O", + "USB2_HUB_RST-O", + "CPU_UART_MUX_SEL-O", + "", + "", + "", + "", + ""; +}; + +&io_expander3 { + gpio-line-names = + "IOB_PRSNT_L", + "IOB_DP_HPD", + "IOX_BMC_RESET", + "IOB_IOEXP_INT_L", + "IOB_UID_LED_L", + "IOB_UID_BTN_L", + "IOB_SYS_RST_BTN_L", + "IOB_PWR_LED_L", + "IOB_PWR_BTN_L", + "IOB_PHY_RST", + "CPLD_JTAG_MUX_SEL", + "", + "", + "", + "", + ""; +}; + +&io_expander4 { + gpio-line-names = + "stby_power_en_cpld","stby_power_gd_cpld","","", + "","","","", + "","","","", + "","","",""; +}; + +&io_expander5 { + gpio-line-names = + "JTAG_MUX_SEL","IOX_BMC_RESET","RTC_CLR_L","RTC_U77_ALRT_N", + "","PSU_ALERT_N","","RST_P12V_STBY_N"; +}; + +&io_expander6 { + gpio-line-names = + "OSFP_PHASE_ID0","OSFP_PHASE_ID1", + "OSFP_PHASE_ID2","OSFP_PHASE_ID3", + "","","","", + "OSFP_BOARD_ID0","OSFP_BOARD_ID1", + "OSFP_BOARD_ID2","PWRGD_P3V3_N1", + "PWRGD_P3V3_N2","","",""; +}; + +&io_expander7 { + gpio-line-names = + "RST_CX7_0","RST_CX7_1", + "CX0_SSD0_PRSNT_L","CX1_SSD1_PRSNT_L", + "CX_BOOT_CMPLT_CX0","CX_BOOT_CMPLT_CX1", + "CX_TWARN_CX0_L","CX_TWARN_CX1_L", + "CX_OVT_SHDN_CX0","CX_OVT_SHDN_CX1", + "FNP_L_CX0","FNP_L_CX1", + "","MCU_GPIO","MCU_RST_N","MCU_RECOVERY_N"; +}; + +&io_expander8 { + gpio-line-names = + "SEC_RST_CX7_0","SEC_RST_CX7_1", + "SEC_CX0_SSD0_PRSNT_L","SEC_CX1_SSD1_PRSNT_L", + "SEC_CX_BOOT_CMPLT_CX0","SEC_CX_BOOT_CMPLT_CX1", + "SEC_CX_TWARN_CX0_L","SEC_CX_TWARN_CX1_L", + "SEC_CX_OVT_SHDN_CX0","SEC_CX_OVT_SHDN_CX1", + "SEC_FNP_L_CX0","SEC_FNP_L_CX1", + "","SEC_MCU_GPIO","SEC_MCU_RST_N","SEC_MCU_RECOVERY_N"; +}; + +&io_expander9 { + gpio-line-names = + "wSequence_Latch_State_N","wP12V_N1N2_RUNTIME_FLT_N", + "wP12V_FAN_RUNTIME_FLT_N","wP12V_AUX_RUNTIME_FLT_N", + "wHost_PERST_SEQPWR_FLT_N","wP12V_N1N2_SEQPWR_FLT_N", + "wP12V_FAN_SEQPWR_FLT_N","wP12V_AUX_SEQPWR_FLT_N", + "wP12V_RUNTIME_FLT_NIC1_N","wAUX_RUNTIME_FLT_NIC1_N", + "wP12V_SEQPWR_FLT_NIC1_N","wAUX_SEQPWR_FLT_NIC1_N", + "wP12V_RUNTIME_FLT_NIC0_N","wAUX_RUNTIME_FLT_NIC0_N", + "wP12V_SEQPWR_FLT_NIC0_N","wAUX_SEQPWR_FLT_NIC0_N"; +}; + +&io_expander10 { + gpio-line-names = + "FM_P12V_NIC1_FLTB_R_N","FM_P3V3_NIC1_FAULT_R_N", + "FM_P12V_NIC0_FLTB_R_N","FM_P3V3_NIC0_FAULT_R_N", + "P48V_HS2_FAULT_N_PLD","P48V_HS1_FAULT_N_PLD", + "P12V_AUX_FAN_OC_PLD_N","P12V_AUX_FAN_FAULT_PLD_N", + "","", + "","", + "","FM_SYS_THROTTLE_N", + "OCP_V3_2_PWRBRK_FROM_HOST_ISO_PLD_N", + "OCP_SFF_PWRBRK_FROM_HOST_ISO_PLD_N"; +}; + +&io_expander11 { + gpio-line-names = + "P12V_AUX_PSU_SMB_ALERT_R_L","P12V_SCM_SENSE_ALERT_R_N", + "P12V_AUX_NIC1_SENSE_ALERT_R_N","P12V_AUX_NIC0_SENSE_ALERT_R_N", + "NODEB_PSU_SMB_ALERT_R_L","NODEA_PSU_SMB_ALERT_R_L", + "P12V_AUX_FAN_ALERT_PLD_N","P52V_SENSE_ALERT_PLD_N", + "PRSNT_RJ45_FIO_N_R","FM_MAIN_PWREN_RMC_EN_ISO_R", + "CHASSIS3_LEAK_Q_N_PLD","CHASSIS2_LEAK_Q_N_PLD", + "CHASSIS1_LEAK_Q_N_PLD","CHASSIS0_LEAK_Q_N_PLD", + "","SMB_RJ45_FIO_TMP_ALERT"; +}; + +&io_expander12 { + gpio-line-names = + "FAN_7_PRESENT_N","FAN_6_PRESENT_N", + "FAN_5_PRESENT_N","FAN_4_PRESENT_N", + "FAN_3_PRESENT_N","FAN_2_PRESENT_N", + "FAN_1_PRESENT_N","FAN_0_PRESENT_N", + "HP_LVC3_OCP_V3_2_PRSNT2_PLD_N","HP_LVC3_OCP_V3_1_PRSNT2_PLD_N", + "PRSNT_HDDBD_POWER_CABLE_N","PRSNT_OSFP0_POWER_CABLE_N", + "PRSNT_CHASSIS3_LEAK_CABLE_R_N","PRSNT_CHASSIS2_LEAK_CABLE_R_N", + "PRSNT_CHASSIS1_LEAK_CABLE_R_N","PRSNT_CHASSIS0_LEAK_CABLE_R_N"; +}; + +&io_expander13 { + gpio-line-names = + "rmc_en_dc_pwr_on","", + "","", + "","", + "","", + "leak_config_0","leak_config_1", + "leak_config_2","leak_config_3", + "mfg_led_test_mode_l","small_leak_err_inj", + "large_leak_err_inj",""; +}; + -- 2.43.0 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH 2/2] ARM: dts: aspeed: clemente: add Meta Clemente BMC 2025-05-13 3:10 ` [PATCH 2/2] ARM: dts: aspeed: clemente: add " leo.jt.wang @ 2025-05-13 7:44 ` Krzysztof Kozlowski 2025-05-13 12:38 ` Andrew Lunn 2025-05-14 13:11 ` Rob Herring (Arm) 2 siblings, 0 replies; 12+ messages in thread From: Krzysztof Kozlowski @ 2025-05-13 7:44 UTC (permalink / raw) To: leo.jt.wang, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley, Andrew Jeffery Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel, george.kw.lee, leo.jt.wang On 13/05/2025 05:10, leo.jt.wang@gmail.com wrote: > From: Leo Wang <leo.jt.wang@fii-foxconn.com> > > Add linux device tree entry for Meta Clemente compute-tray > BMC using AST2600 SoC. > > Signed-off-by: Leo Wang <leo.jt.wang@fii-foxconn.com> Missing threading. Missing versioning. Best regards, Krzysztof ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 2/2] ARM: dts: aspeed: clemente: add Meta Clemente BMC 2025-05-13 3:10 ` [PATCH 2/2] ARM: dts: aspeed: clemente: add " leo.jt.wang 2025-05-13 7:44 ` Krzysztof Kozlowski @ 2025-05-13 12:38 ` Andrew Lunn 2025-05-14 13:11 ` Rob Herring (Arm) 2 siblings, 0 replies; 12+ messages in thread From: Andrew Lunn @ 2025-05-13 12:38 UTC (permalink / raw) To: leo.jt.wang Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley, Andrew Jeffery, devicetree, linux-arm-kernel, linux-aspeed, linux-kernel, george.kw.lee, leo.jt.wang > +&mac0 { > + status = "disabled"; > + /* phy-mode = "rgmii-rxid"; */ Did i already say this is probably wrong? Andrew ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 2/2] ARM: dts: aspeed: clemente: add Meta Clemente BMC 2025-05-13 3:10 ` [PATCH 2/2] ARM: dts: aspeed: clemente: add " leo.jt.wang 2025-05-13 7:44 ` Krzysztof Kozlowski 2025-05-13 12:38 ` Andrew Lunn @ 2025-05-14 13:11 ` Rob Herring (Arm) 2 siblings, 0 replies; 12+ messages in thread From: Rob Herring (Arm) @ 2025-05-14 13:11 UTC (permalink / raw) To: leo.jt.wang Cc: Andrew Jeffery, linux-arm-kernel, george.kw.lee, Conor Dooley, leo.jt.wang, Joel Stanley, Krzysztof Kozlowski, linux-kernel, linux-aspeed, devicetree On Tue, 13 May 2025 11:10:10 +0800, leo.jt.wang@gmail.com wrote: > From: Leo Wang <leo.jt.wang@fii-foxconn.com> > > Add linux device tree entry for Meta Clemente compute-tray > BMC using AST2600 SoC. > > Signed-off-by: Leo Wang <leo.jt.wang@fii-foxconn.com> > --- > arch/arm/boot/dts/aspeed/Makefile | 1 + > .../aspeed/aspeed-bmc-facebook-clemente.dts | 1269 +++++++++++++++++ > 2 files changed, 1270 insertions(+) > create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts > My bot found new DTB warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade This patch series was applied (using b4) to base: Base: attempting to guess base-commit... Base: tags/next-20250514 (exact match) If this is not the correct base, please add 'base-commit' tag (or use b4 which does this automatically) New warnings running 'make CHECK_DTBS=y for arch/arm/boot/dts/aspeed/' for 6822b851.050a0220.27a24d.d071@mx.google.com: arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: / (facebook,clemente-bmc): compatible: 'oneOf' conditional failed, one must be fixed: 'facebook,clemente-bmc' is not one of ['delta,ahe50dc-bmc', 'facebook,galaxy100-bmc', 'facebook,wedge100-bmc', 'facebook,wedge40-bmc', 'microsoft,olympus-bmc', 'quanta,q71l-bmc', 'tyan,palmetto-bmc', 'yadro,vesnin-bmc'] 'facebook,clemente-bmc' is not one of ['amd,daytonax-bmc', 'amd,ethanolx-bmc', 'ampere,mtjade-bmc', 'aspeed,ast2500-evb', 'asrock,e3c246d4i-bmc', 'asrock,e3c256d4i-bmc', 'asrock,romed8hm3-bmc', 'asrock,spc621d8hm3-bmc', 'asrock,x570d4u-bmc', 'bytedance,g220a-bmc', 'facebook,cmm-bmc', 'facebook,minipack-bmc', 'facebook,tiogapass-bmc', 'facebook,yamp-bmc', 'facebook,yosemitev2-bmc', 'facebook,wedge400-bmc', 'hxt,stardragon4800-rep2-bmc', 'ibm,mihawk-bmc', 'ibm,mowgli-bmc', 'ibm,romulus-bmc', 'ibm,swift-bmc', 'ibm,witherspoon-bmc', 'ingrasys,zaius-bmc', 'inspur,fp5280g2-bmc', 'inspur,nf5280m6-bmc', 'inspur,on5263m5-bmc', 'intel,s2600wf-bmc', 'inventec,lanyang-bmc', 'lenovo,hr630-bmc', 'lenovo,hr855xg2-bmc', 'portwell,neptune-bmc', 'qcom,centriq2400-rep-bmc', 'supermicro,x11spi-bmc', 'tyan,s7106-bmc', 'tyan,s8036-bmc', 'yadro,nicole-bmc', 'yadro,vegman-n110-bmc', 'yadro,vegman-rx20-bmc', 'yadro,vegman-sx20-bmc'] 'facebook,clemente-bmc' is not one of ['ampere,mtjefferson-bmc', 'ampere,mtmitchell-bmc', 'aspeed,ast2600-evb', 'aspeed,ast2600-evb-a1', 'asus,x4tf-bmc', 'facebook,bletchley-bmc', 'facebook,catalina-bmc', 'facebook,cloudripper-bmc', 'facebook,elbert-bmc', 'facebook,fuji-bmc', 'facebook,greatlakes-bmc', 'facebook,harma-bmc', 'facebook,minerva-cmc', 'facebook,yosemite4-bmc', 'ibm,blueridge-bmc', 'ibm,everest-bmc', 'ibm,fuji-bmc', 'ibm,rainier-bmc', 'ibm,sbp1-bmc', 'ibm,system1-bmc', 'ibm,tacoma-bmc', 'inventec,starscream-bmc', 'inventec,transformer-bmc', 'jabil,rbp-bmc', 'nvidia,gb200nvl-bmc', 'qcom,dc-scm-v1-bmc', 'quanta,s6q-bmc', 'ufispace,ncplite-bmc'] 'aspeed,ast2400' was expected 'aspeed,ast2500' was expected from schema $id: http://devicetree.org/schemas/arm/aspeed/aspeed.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /: failed to match any schema with compatible: ['facebook,clemente-bmc', 'aspeed,ast2600'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: timer (arm,armv7-timer): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/timer/arm,arch_timer.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /sdram@1e6e0000: failed to match any schema with compatible: ['aspeed,ast2600-sdram-edac', 'syscon'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: bus@1e600000 (aspeed,ast2600-ahbc): compatible: ['aspeed,ast2600-ahbc', 'syscon'] is too long from schema $id: http://devicetree.org/schemas/bus/aspeed,ast2600-ahbc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: ethernet@1e670000 (aspeed,ast2600-mac): Unevaluated properties are not allowed ('ncsi-ctrl,start-redo-probe', 'ncsi-package' were unexpected) from schema $id: http://devicetree.org/schemas/net/faraday,ftgmac100.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: ethernet@1e670000 (aspeed,ast2600-mac): 'ncsi-ctrl,start-redo-probe' does not match any of the regexes: '^#.*', '^(at25|bm|devbus|dmacap|dsa|exynos|fsi[ab]|gpio-fan|gpio-key|gpio|gpmc|hdmi|i2c-gpio),.*', '^(keypad|m25p|max8952|max8997|max8998|mpmc),.*', '^(pciclass|pinctrl-single|#pinctrl-single|PowerPC),.*', '^(pl022|pxa-mmc|rcar_sound|rotary-encoder|s5m8767|sdhci),.*', '^(simple-audio-card|st-plgpio|st-spics|ts),.*', '^100ask,.*', '^70mai,.*', '^8dev,.*', '^GEFanuc,.*', '^IBM,.*', '^ORCL,.*', '^SUNW,.*', '^[a-zA-Z0-9#_][a-zA-Z0-9+\-._@]{0,63}$', '^[a-zA-Z0-9+\-._]*@[0-9a-zA-Z,]*$', '^abb,.*', '^abilis,.*', '^abracon,.*', '^abt,.*', '^acbel,.*', '^acelink,.*', '^acer,.*', '^acme,.*', '^actions,.*', '^active-semi,.*', '^ad,.*', '^adafruit,.*', '^adapteva,.*', '^adaptrum,.*', '^adh,.*', '^adi,.*', '^adieng,.*', '^admatec,.*', '^advantech,.*', '^aeroflexgaisler,.*', '^aesop,.*', '^airoha,.*', '^al,.*', '^alcatel,.*', '^aldec,.*', '^alfa-network,.*', '^allegro,.*', '^allegromicro,.*', '^alliedvision,.*', '^allo,.*', '^allwinner,.*', '^alphascale,.*', '^alps,.*', '^alt,.*', '^altr,.*', '^amarula,.*', '^amazon,.*', '^amcc,.*', '^amd,.*', '^amediatech,.*', '^amlogic,.*', '^ampere,.*', '^amphenol,.*', '^ampire,.*', '^ams,.*', '^amstaos,.*', '^analogix,.*', '^anbernic,.*', '^andestech,.*', '^anvo,.*', '^aoly,.*', '^aosong,.*', '^apm,.*', '^apple,.*', '^aptina,.*', '^arasan,.*', '^archermind,.*', '^arcom,.*', '^arctic,.*', '^arcx,.*', '^ariaboard,.*', '^aries,.*', '^arm,.*', '^armadeus,.*', '^armsom,.*', '^arrow,.*', '^artesyn,.*', '^asahi-kasei,.*', '^asc,.*', '^asix,.*', '^aspeed,.*', '^asrock,.*', '^asteralabs,.*', '^asus,.*', '^atheros,.*', '^atlas,.*', '^atmel,.*', '^auo,.*', '^auvidea,.*', '^avago,.*', '^avia,.*', '^avic,.*', '^avnet,.*', '^awinic,.*', '^axentia,.*', '^axis,.*', '^azoteq,.*', '^azw,.*', '^baikal,.*', '^bananapi,.*', '^beacon,.*', '^beagle,.*', '^belling,.*', '^bhf,.*', '^bigtreetech,.*', '^bitmain,.*', '^blaize,.*', '^blutek,.*', '^boe,.*', '^bosch,.*', '^boundary,.*', '^brcm,.*', '^broadmobi,.*', '^bsh,.*', '^bticino,.*', '^buffalo,.*', '^bur,.*', '^bytedance,.*', '^calamp,.*', '^calao,.*', '^calaosystems,.*', '^calxeda,.*', '^cameo,.*', '^canaan,.*', '^caninos,.*', '^capella,.*', '^cascoda,.*', '^catalyst,.*', '^cavium,.*', '^cct,.*', '^cdns,.*', '^cdtech,.*', '^cellwise,.*', '^ceva,.*', '^chargebyte,.*', '^checkpoint,.*', '^chefree,.*', '^chipidea,.*', '^chipone,.*', '^chipspark,.*', '^chongzhou,.*', '^chrontel,.*', '^chrp,.*', '^chunghwa,.*', '^chuwi,.*', '^ciaa,.*', '^cirrus,.*', '^cisco,.*', '^clockwork,.*', '^cloos,.*', '^cloudengines,.*', '^cnm,.*', '^cnxt,.*', '^colorfly,.*', '^compulab,.*', '^comvetia,.*', '^congatec,.*', '^coolpi,.*', '^coreriver,.*', '^corpro,.*', '^cortina,.*', '^cosmic,.*', '^crane,.*', '^creative,.*', '^crystalfontz,.*', '^csky,.*', '^csot,.*', '^csq,.*', '^ctera,.*', '^ctu,.*', '^cubietech,.*', '^cudy,.*', '^cui,.*', '^cypress,.*', '^cyx,.*', '^cznic,.*', '^dallas,.*', '^dataimage,.*', '^davicom,.*', '^deepcomputing,.*', '^dell,.*', '^delta,.*', '^densitron,.*', '^denx,.*', '^devantech,.*', '^dfi,.*', '^dfrobot,.*', '^dh,.*', '^difrnce,.*', '^digi,.*', '^digilent,.*', '^dimonoff,.*', '^diodes,.*', '^dioo,.*', '^dlc,.*', '^dlg,.*', '^dlink,.*', '^dmo,.*', '^domintech,.*', '^dongwoon,.*', '^dptechnics,.*', '^dragino,.*', '^dream,.*', '^ds,.*', '^dserve,.*', '^dynaimage,.*', '^ea,.*', '^ebang,.*', '^ebbg,.*', '^ebs-systart,.*', '^ebv,.*', '^eckelmann,.*', '^econet,.*', '^edgeble,.*', '^edimax,.*', '^edt,.*', '^ees,.*', '^eeti,.*', '^einfochips,.*', '^eink,.*', '^elan,.*', '^element14,.*', '^elgin,.*', '^elida,.*', '^elimo,.*', '^elpida,.*', '^embedfire,.*', '^embest,.*', '^emcraft,.*', '^emlid,.*', '^emmicro,.*', '^empire-electronix,.*', '^emtrion,.*', '^enclustra,.*', '^endless,.*', '^ene,.*', '^energymicro,.*', '^engicam,.*', '^engleder,.*', '^epcos,.*', '^epfl,.*', '^epson,.*', '^esp,.*', '^est,.*', '^ettus,.*', '^eukrea,.*', '^everest,.*', '^everspin,.*', '^evervision,.*', '^exar,.*', '^excito,.*', '^exegin,.*', '^ezchip,.*', '^facebook,.*', '^fairchild,.*', '^fairphone,.*', '^faraday,.*', '^fascontek,.*', '^fastrax,.*', '^fcs,.*', '^feixin,.*', '^feiyang,.*', '^fii,.*', '^firefly,.*', '^focaltech,.*', '^forlinx,.*', '^freebox,.*', '^freecom,.*', '^frida,.*', '^friendlyarm,.*', '^fsl,.*', '^fujitsu,.*', '^fxtec,.*', '^galaxycore,.*', '^gameforce,.*', '^gardena,.*', '^gateway,.*', '^gateworks,.*', '^gcw,.*', '^ge,.*', '^geekbuying,.*', '^gef,.*', '^gehc,.*', '^gemei,.*', '^gemtek,.*', '^genesys,.*', '^genexis,.*', '^geniatech,.*', '^giantec,.*', '^giantplus,.*', '^glinet,.*', '^globalscale,.*', '^globaltop,.*', '^gmt,.*', '^gocontroll,.*', '^goldelico,.*', '^goodix,.*', '^google,.*', '^goramo,.*', '^gplus,.*', '^grinn,.*', '^grmn,.*', '^gumstix,.*', '^gw,.*', '^hannstar,.*', '^haochuangyi,.*', '^haoyu,.*', '^hardkernel,.*', '^hechuang,.*', '^hideep,.*', '^himax,.*', '^hirschmann,.*', '^hisi,.*', '^hisilicon,.*', '^hit,.*', '^hitex,.*', '^holt,.*', '^holtek,.*', '^honestar,.*', '^honeywell,.*', '^hoperf,.*', '^hoperun,.*', '^hp,.*', '^hpe,.*', '^hsg,.*', '^htc,.*', '^huawei,.*', '^hugsun,.*', '^hwacom,.*', '^hxt,.*', '^hycon,.*', '^hydis,.*', '^hynitron,.*', '^hynix,.*', '^hyundai,.*', '^i2se,.*', '^ibm,.*', '^icplus,.*', '^idt,.*', '^iei,.*', '^ifi,.*', '^ilitek,.*', '^imagis,.*', '^img,.*', '^imi,.*', '^inanbo,.*', '^incircuit,.*', '^indiedroid,.*', '^inet-tek,.*', '^infineon,.*', '^inforce,.*', '^ingenic,.*', '^ingrasys,.*', '^injoinic,.*', '^innocomm,.*', '^innolux,.*', '^inside-secure,.*', '^insignal,.*', '^inspur,.*', '^intel,.*', '^intercontrol,.*', '^invensense,.*', '^inventec,.*', '^inversepath,.*', '^iom,.*', '^irondevice,.*', '^isee,.*', '^isil,.*', '^issi,.*', '^ite,.*', '^itead,.*', '^itian,.*', '^ivo,.*', '^iwave,.*', '^jadard,.*', '^jasonic,.*', '^jdi,.*', '^jedec,.*', '^jenson,.*', '^jesurun,.*', '^jethome,.*', '^jianda,.*', '^jide,.*', '^joz,.*', '^kam,.*', '^karo,.*', '^keithkoep,.*', '^keymile,.*', '^khadas,.*', '^kiebackpeter,.*', '^kinetic,.*', '^kingdisplay,.*', '^kingnovel,.*', '^kionix,.*', '^kobo,.*', '^kobol,.*', '^koe,.*', '^kontron,.*', '^kosagi,.*', '^kvg,.*', '^kyo,.*', '^lacie,.*', '^laird,.*', '^lamobo,.*', '^lantiq,.*', '^lattice,.*', '^lckfb,.*', '^lctech,.*', '^leadtek,.*', '^leez,.*', '^lego,.*', '^lemaker,.*', '^lenovo,.*', '^lg,.*', '^lgphilips,.*', '^libretech,.*', '^licheepi,.*', '^linaro,.*', '^lincolntech,.*', '^lineartechnology,.*', '^linksprite,.*', '^linksys,.*', '^linutronix,.*', '^linux,.*', '^linx,.*', '^liontron,.*', '^liteon,.*', '^litex,.*', '^lltc,.*', '^logicpd,.*', '^logictechno,.*', '^longcheer,.*', '^lontium,.*', '^loongmasses,.*', '^loongson,.*', '^lsi,.*', '^lunzn,.*', '^luxul,.*', '^lwn,.*', '^lxa,.*', '^m5stack,.*', '^macnica,.*', '^mantix,.*', '^mapleboard,.*', '^marantec,.*', '^marvell,.*', '^maxbotix,.*', '^maxim,.*', '^maxlinear,.*', '^mbvl,.*', '^mcube,.*', '^meas,.*', '^mecer,.*', '^mediatek,.*', '^megachips,.*', '^mele,.*', '^melexis,.*', '^melfas,.*', '^mellanox,.*', '^memsensing,.*', '^memsic,.*', '^menlo,.*', '^mentor,.*', '^meraki,.*', '^merrii,.*', '^methode,.*', '^micrel,.*', '^microchip,.*', '^microcrystal,.*', '^micron,.*', '^microsoft,.*', '^microsys,.*', '^microtips,.*', '^mikroe,.*', '^mikrotik,.*', '^milkv,.*', '^miniand,.*', '^minix,.*', '^mips,.*', '^miramems,.*', '^mitsubishi,.*', '^mitsumi,.*', '^mixel,.*', '^miyoo,.*', '^mntre,.*', '^mobileye,.*', '^modtronix,.*', '^moortec,.*', '^mosaixtech,.*', '^motorcomm,.*', '^motorola,.*', '^moxa,.*', '^mpl,.*', '^mps,.*', '^mqmaker,.*', '^mrvl,.*', '^mscc,.*', '^msi,.*', '^mstar,.*', '^mti,.*', '^multi-inno,.*', '^mundoreader,.*', '^murata,.*', '^mxic,.*', '^mxicy,.*', '^myir,.*', '^national,.*', '^neardi,.*', '^nec,.*', '^neofidelity,.*', '^neonode,.*', '^netcube,.*', '^netgear,.*', '^netlogic,.*', '^netron-dy,.*', '^netronix,.*', '^netxeon,.*', '^neweast,.*', '^newhaven,.*', '^newvision,.*', '^nexbox,.*', '^nextthing,.*', '^ni,.*', '^nintendo,.*', '^nlt,.*', '^nokia,.*', '^nordic,.*', '^nothing,.*', '^novatek,.*', '^novtech,.*', '^numonyx,.*', '^nutsboard,.*', '^nuvoton,.*', '^nvd,.*', '^nvidia,.*', '^nxp,.*', '^oceanic,.*', '^ocs,.*', '^oct,.*', '^okaya,.*', '^oki,.*', '^olimex,.*', '^olpc,.*', '^oneplus,.*', '^onie,.*', '^onion,.*', '^onnn,.*', '^ontat,.*', '^opalkelly,.*', '^openailab,.*', '^opencores,.*', '^openembed,.*', '^openpandora,.*', '^openrisc,.*', '^openwrt,.*', '^option,.*', '^oranth,.*', '^orisetech,.*', '^ortustech,.*', '^osddisplays,.*', '^osmc,.*', '^ouya,.*', '^overkiz,.*', '^ovti,.*', '^oxsemi,.*', '^ozzmaker,.*', '^panasonic,.*', '^parade,.*', '^parallax,.*', '^pda,.*', '^pegatron,.*', '^pericom,.*', '^pervasive,.*', '^phicomm,.*', '^phytec,.*', '^picochip,.*', '^pinctrl-[0-9]+$', '^pine64,.*', '^pineriver,.*', '^pixcir,.*', '^plantower,.*', '^plathome,.*', '^plda,.*', '^plx,.*', '^ply,.*', '^pni,.*', '^pocketbook,.*', '^polaroid,.*', '^polyhex,.*', '^portwell,.*', '^poslab,.*', '^pov,.*', '^powertip,.*', '^powervr,.*', '^powkiddy,.*', '^pri,.*', '^primeview,.*', '^primux,.*', '^probox2,.*', '^prt,.*', '^pulsedlight,.*', '^purism,.*', '^puya,.*', '^qca,.*', '^qcom,.*', '^qemu,.*', '^qi,.*', '^qiaodian,.*', '^qihua,.*', '^qishenglong,.*', '^qnap,.*', '^quanta,.*', '^radxa,.*', '^raidsonic,.*', '^ralink,.*', '^ramtron,.*', '^raspberrypi,.*', '^raydium,.*', '^rda,.*', '^realtek,.*', '^relfor,.*', '^remarkable,.*', '^renesas,.*', '^rervision,.*', '^retronix,.*', '^revotics,.*', '^rex,.*', '^richtek,.*', '^ricoh,.*', '^rikomagic,.*', '^riot,.*', '^riscv,.*', '^rockchip,.*', '^rocktech,.*', '^rohm,.*', '^ronbo,.*', '^roofull,.*', '^roseapplepi,.*', '^rve,.*', '^saef,.*', '^samsung,.*', '^samtec,.*', '^sancloud,.*', '^sandisk,.*', '^satoz,.*', '^sbs,.*', '^schindler,.*', '^schneider,.*', '^sciosense,.*', '^seagate,.*', '^seeed,.*', '^seirobotics,.*', '^semtech,.*', '^senseair,.*', '^sensirion,.*', '^sensortek,.*', '^sercomm,.*', '^sff,.*', '^sgd,.*', '^sgmicro,.*', '^sgx,.*', '^sharp,.*', '^shift,.*', '^shimafuji,.*', '^shineworld,.*', '^shiratech,.*', '^si-en,.*', '^si-linux,.*', '^siemens,.*', '^sifive,.*', '^siflower,.*', '^sigma,.*', '^sii,.*', '^sil,.*', '^silabs,.*', '^silan,.*', '^silead,.*', '^silergy,.*', '^silex-insight,.*', '^siliconfile,.*', '^siliconmitus,.*', '^silvaco,.*', '^simtek,.*', '^sinlinx,.*', '^sinovoip,.*', '^sinowealth,.*', '^sipeed,.*', '^sirf,.*', '^sis,.*', '^sitronix,.*', '^skov,.*', '^skyworks,.*', '^smartlabs,.*', '^smartrg,.*', '^smi,.*', '^smsc,.*', '^snps,.*', '^sochip,.*', '^socionext,.*', '^solidrun,.*', '^solomon,.*', '^sony,.*', '^sophgo,.*', '^sourceparts,.*', '^spacemit,.*', '^spansion,.*', '^sparkfun,.*', '^spinalhdl,.*', '^sprd,.*', '^square,.*', '^ssi,.*', '^sst,.*', '^sstar,.*', '^st,.*', '^st-ericsson,.*', '^starfive,.*', '^starry,.*', '^startek,.*', '^starterkit,.*', '^ste,.*', '^stericsson,.*', '^storlink,.*', '^storm,.*', '^storopack,.*', '^summit,.*', '^sunchip,.*', '^sundance,.*', '^sunplus,.*', '^supermicro,.*', '^swir,.*', '^syna,.*', '^synology,.*', '^synopsys,.*', '^tbs,.*', '^tbs-biometrics,.*', '^tcg,.*', '^tcl,.*', '^tcs,.*', '^tcu,.*', '^tdo,.*', '^team-source-display,.*', '^technexion,.*', '^technologic,.*', '^techstar,.*', '^techwell,.*', '^teejet,.*', '^teltonika,.*', '^tempo,.*', '^terasic,.*', '^tesla,.*', '^test,.*', '^tfc,.*', '^thead,.*', '^thine,.*', '^thingyjp,.*', '^thundercomm,.*', '^thwc,.*', '^ti,.*', '^tianma,.*', '^tlm,.*', '^tmt,.*', '^topeet,.*', '^topic,.*', '^topland,.*', '^toppoly,.*', '^topwise,.*', '^toradex,.*', '^toshiba,.*', '^toumaz,.*', '^tpk,.*', '^tplink,.*', '^tpo,.*', '^tq,.*', '^transpeed,.*', '^traverse,.*', '^tronfy,.*', '^tronsmart,.*', '^truly,.*', '^tsd,.*', '^turing,.*', '^tyan,.*', '^tyhx,.*', '^u-blox,.*', '^u-boot,.*', '^ubnt,.*', '^ucrobotics,.*', '^udoo,.*', '^ufispace,.*', '^ugoos,.*', '^uni-t,.*', '^uniwest,.*', '^upisemi,.*', '^urt,.*', '^usi,.*', '^usr,.*', '^utoo,.*', '^v3,.*', '^vaisala,.*', '^vamrs,.*', '^variscite,.*', '^vdl,.*', '^vertexcom,.*', '^via,.*', '^vialab,.*', '^vicor,.*', '^videostrong,.*', '^virtio,.*', '^virtual,.*', '^vishay,.*', '^visionox,.*', '^vitesse,.*', '^vivante,.*', '^vivax,.*', '^vocore,.*', '^voipac,.*', '^voltafield,.*', '^vot,.*', '^vscom,.*', '^vxt,.*', '^wacom,.*', '^wanchanglong,.*', '^wand,.*', '^waveshare,.*', '^wd,.*', '^we,.*', '^welltech,.*', '^wetek,.*', '^wexler,.*', '^whwave,.*', '^wi2wi,.*', '^widora,.*', '^wiligear,.*', '^willsemi,.*', '^winbond,.*', '^wingtech,.*', '^winlink,.*', '^winsen,.*', '^winstar,.*', '^wirelesstag,.*', '^wits,.*', '^wlf,.*', '^wm,.*', '^wobo,.*', '^wolfvision,.*', '^x-powers,.*', '^xen,.*', '^xes,.*', '^xiaomi,.*', '^xillybus,.*', '^xingbangda,.*', '^xinpeng,.*', '^xiphera,.*', '^xlnx,.*', '^xnano,.*', '^xunlong,.*', '^xylon,.*', '^yadro,.*', '^yamaha,.*', '^yes-optoelectronics,.*', '^yic,.*', '^yiming,.*', '^ylm,.*', '^yna,.*', '^yones-toptech,.*', '^ys,.*', '^ysoft,.*', '^yuridenki,.*', '^yuzukihd,.*', '^zarlink,.*', '^zealz,.*', '^zeitec,.*', '^zidoo,.*', '^zii,.*', '^zinitix,.*', '^zkmagic,.*', '^zte,.*', '^zyxel,.*' from schema $id: http://devicetree.org/schemas/vendor-prefixes.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: ethernet@1e690000 (aspeed,ast2600-mac): Unevaluated properties are not allowed ('ncsi-ctrl,start-redo-probe', 'ncsi-package' were unexpected) from schema $id: http://devicetree.org/schemas/net/faraday,ftgmac100.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: ethernet@1e690000 (aspeed,ast2600-mac): 'ncsi-ctrl,start-redo-probe' does not match any of the regexes: '^#.*', '^(at25|bm|devbus|dmacap|dsa|exynos|fsi[ab]|gpio-fan|gpio-key|gpio|gpmc|hdmi|i2c-gpio),.*', '^(keypad|m25p|max8952|max8997|max8998|mpmc),.*', '^(pciclass|pinctrl-single|#pinctrl-single|PowerPC),.*', '^(pl022|pxa-mmc|rcar_sound|rotary-encoder|s5m8767|sdhci),.*', '^(simple-audio-card|st-plgpio|st-spics|ts),.*', '^100ask,.*', '^70mai,.*', '^8dev,.*', '^GEFanuc,.*', '^IBM,.*', '^ORCL,.*', '^SUNW,.*', '^[a-zA-Z0-9#_][a-zA-Z0-9+\-._@]{0,63}$', '^[a-zA-Z0-9+\-._]*@[0-9a-zA-Z,]*$', '^abb,.*', '^abilis,.*', '^abracon,.*', '^abt,.*', '^acbel,.*', '^acelink,.*', '^acer,.*', '^acme,.*', '^actions,.*', '^active-semi,.*', '^ad,.*', '^adafruit,.*', '^adapteva,.*', '^adaptrum,.*', '^adh,.*', '^adi,.*', '^adieng,.*', '^admatec,.*', '^advantech,.*', '^aeroflexgaisler,.*', '^aesop,.*', '^airoha,.*', '^al,.*', '^alcatel,.*', '^aldec,.*', '^alfa-network,.*', '^allegro,.*', '^allegromicro,.*', '^alliedvision,.*', '^allo,.*', '^allwinner,.*', '^alphascale,.*', '^alps,.*', '^alt,.*', '^altr,.*', '^amarula,.*', '^amazon,.*', '^amcc,.*', '^amd,.*', '^amediatech,.*', '^amlogic,.*', '^ampere,.*', '^amphenol,.*', '^ampire,.*', '^ams,.*', '^amstaos,.*', '^analogix,.*', '^anbernic,.*', '^andestech,.*', '^anvo,.*', '^aoly,.*', '^aosong,.*', '^apm,.*', '^apple,.*', '^aptina,.*', '^arasan,.*', '^archermind,.*', '^arcom,.*', '^arctic,.*', '^arcx,.*', '^ariaboard,.*', '^aries,.*', '^arm,.*', '^armadeus,.*', '^armsom,.*', '^arrow,.*', '^artesyn,.*', '^asahi-kasei,.*', '^asc,.*', '^asix,.*', '^aspeed,.*', '^asrock,.*', '^asteralabs,.*', '^asus,.*', '^atheros,.*', '^atlas,.*', '^atmel,.*', '^auo,.*', '^auvidea,.*', '^avago,.*', '^avia,.*', '^avic,.*', '^avnet,.*', '^awinic,.*', '^axentia,.*', '^axis,.*', '^azoteq,.*', '^azw,.*', '^baikal,.*', '^bananapi,.*', '^beacon,.*', '^beagle,.*', '^belling,.*', '^bhf,.*', '^bigtreetech,.*', '^bitmain,.*', '^blaize,.*', '^blutek,.*', '^boe,.*', '^bosch,.*', '^boundary,.*', '^brcm,.*', '^broadmobi,.*', '^bsh,.*', '^bticino,.*', '^buffalo,.*', '^bur,.*', '^bytedance,.*', '^calamp,.*', '^calao,.*', '^calaosystems,.*', '^calxeda,.*', '^cameo,.*', '^canaan,.*', '^caninos,.*', '^capella,.*', '^cascoda,.*', '^catalyst,.*', '^cavium,.*', '^cct,.*', '^cdns,.*', '^cdtech,.*', '^cellwise,.*', '^ceva,.*', '^chargebyte,.*', '^checkpoint,.*', '^chefree,.*', '^chipidea,.*', '^chipone,.*', '^chipspark,.*', '^chongzhou,.*', '^chrontel,.*', '^chrp,.*', '^chunghwa,.*', '^chuwi,.*', '^ciaa,.*', '^cirrus,.*', '^cisco,.*', '^clockwork,.*', '^cloos,.*', '^cloudengines,.*', '^cnm,.*', '^cnxt,.*', '^colorfly,.*', '^compulab,.*', '^comvetia,.*', '^congatec,.*', '^coolpi,.*', '^coreriver,.*', '^corpro,.*', '^cortina,.*', '^cosmic,.*', '^crane,.*', '^creative,.*', '^crystalfontz,.*', '^csky,.*', '^csot,.*', '^csq,.*', '^ctera,.*', '^ctu,.*', '^cubietech,.*', '^cudy,.*', '^cui,.*', '^cypress,.*', '^cyx,.*', '^cznic,.*', '^dallas,.*', '^dataimage,.*', '^davicom,.*', '^deepcomputing,.*', '^dell,.*', '^delta,.*', '^densitron,.*', '^denx,.*', '^devantech,.*', '^dfi,.*', '^dfrobot,.*', '^dh,.*', '^difrnce,.*', '^digi,.*', '^digilent,.*', '^dimonoff,.*', '^diodes,.*', '^dioo,.*', '^dlc,.*', '^dlg,.*', '^dlink,.*', '^dmo,.*', '^domintech,.*', '^dongwoon,.*', '^dptechnics,.*', '^dragino,.*', '^dream,.*', '^ds,.*', '^dserve,.*', '^dynaimage,.*', '^ea,.*', '^ebang,.*', '^ebbg,.*', '^ebs-systart,.*', '^ebv,.*', '^eckelmann,.*', '^econet,.*', '^edgeble,.*', '^edimax,.*', '^edt,.*', '^ees,.*', '^eeti,.*', '^einfochips,.*', '^eink,.*', '^elan,.*', '^element14,.*', '^elgin,.*', '^elida,.*', '^elimo,.*', '^elpida,.*', '^embedfire,.*', '^embest,.*', '^emcraft,.*', '^emlid,.*', '^emmicro,.*', '^empire-electronix,.*', '^emtrion,.*', '^enclustra,.*', '^endless,.*', '^ene,.*', '^energymicro,.*', '^engicam,.*', '^engleder,.*', '^epcos,.*', '^epfl,.*', '^epson,.*', '^esp,.*', '^est,.*', '^ettus,.*', '^eukrea,.*', '^everest,.*', '^everspin,.*', '^evervision,.*', '^exar,.*', '^excito,.*', '^exegin,.*', '^ezchip,.*', '^facebook,.*', '^fairchild,.*', '^fairphone,.*', '^faraday,.*', '^fascontek,.*', '^fastrax,.*', '^fcs,.*', '^feixin,.*', '^feiyang,.*', '^fii,.*', '^firefly,.*', '^focaltech,.*', '^forlinx,.*', '^freebox,.*', '^freecom,.*', '^frida,.*', '^friendlyarm,.*', '^fsl,.*', '^fujitsu,.*', '^fxtec,.*', '^galaxycore,.*', '^gameforce,.*', '^gardena,.*', '^gateway,.*', '^gateworks,.*', '^gcw,.*', '^ge,.*', '^geekbuying,.*', '^gef,.*', '^gehc,.*', '^gemei,.*', '^gemtek,.*', '^genesys,.*', '^genexis,.*', '^geniatech,.*', '^giantec,.*', '^giantplus,.*', '^glinet,.*', '^globalscale,.*', '^globaltop,.*', '^gmt,.*', '^gocontroll,.*', '^goldelico,.*', '^goodix,.*', '^google,.*', '^goramo,.*', '^gplus,.*', '^grinn,.*', '^grmn,.*', '^gumstix,.*', '^gw,.*', '^hannstar,.*', '^haochuangyi,.*', '^haoyu,.*', '^hardkernel,.*', '^hechuang,.*', '^hideep,.*', '^himax,.*', '^hirschmann,.*', '^hisi,.*', '^hisilicon,.*', '^hit,.*', '^hitex,.*', '^holt,.*', '^holtek,.*', '^honestar,.*', '^honeywell,.*', '^hoperf,.*', '^hoperun,.*', '^hp,.*', '^hpe,.*', '^hsg,.*', '^htc,.*', '^huawei,.*', '^hugsun,.*', '^hwacom,.*', '^hxt,.*', '^hycon,.*', '^hydis,.*', '^hynitron,.*', '^hynix,.*', '^hyundai,.*', '^i2se,.*', '^ibm,.*', '^icplus,.*', '^idt,.*', '^iei,.*', '^ifi,.*', '^ilitek,.*', '^imagis,.*', '^img,.*', '^imi,.*', '^inanbo,.*', '^incircuit,.*', '^indiedroid,.*', '^inet-tek,.*', '^infineon,.*', '^inforce,.*', '^ingenic,.*', '^ingrasys,.*', '^injoinic,.*', '^innocomm,.*', '^innolux,.*', '^inside-secure,.*', '^insignal,.*', '^inspur,.*', '^intel,.*', '^intercontrol,.*', '^invensense,.*', '^inventec,.*', '^inversepath,.*', '^iom,.*', '^irondevice,.*', '^isee,.*', '^isil,.*', '^issi,.*', '^ite,.*', '^itead,.*', '^itian,.*', '^ivo,.*', '^iwave,.*', '^jadard,.*', '^jasonic,.*', '^jdi,.*', '^jedec,.*', '^jenson,.*', '^jesurun,.*', '^jethome,.*', '^jianda,.*', '^jide,.*', '^joz,.*', '^kam,.*', '^karo,.*', '^keithkoep,.*', '^keymile,.*', '^khadas,.*', '^kiebackpeter,.*', '^kinetic,.*', '^kingdisplay,.*', '^kingnovel,.*', '^kionix,.*', '^kobo,.*', '^kobol,.*', '^koe,.*', '^kontron,.*', '^kosagi,.*', '^kvg,.*', '^kyo,.*', '^lacie,.*', '^laird,.*', '^lamobo,.*', '^lantiq,.*', '^lattice,.*', '^lckfb,.*', '^lctech,.*', '^leadtek,.*', '^leez,.*', '^lego,.*', '^lemaker,.*', '^lenovo,.*', '^lg,.*', '^lgphilips,.*', '^libretech,.*', '^licheepi,.*', '^linaro,.*', '^lincolntech,.*', '^lineartechnology,.*', '^linksprite,.*', '^linksys,.*', '^linutronix,.*', '^linux,.*', '^linx,.*', '^liontron,.*', '^liteon,.*', '^litex,.*', '^lltc,.*', '^logicpd,.*', '^logictechno,.*', '^longcheer,.*', '^lontium,.*', '^loongmasses,.*', '^loongson,.*', '^lsi,.*', '^lunzn,.*', '^luxul,.*', '^lwn,.*', '^lxa,.*', '^m5stack,.*', '^macnica,.*', '^mantix,.*', '^mapleboard,.*', '^marantec,.*', '^marvell,.*', '^maxbotix,.*', '^maxim,.*', '^maxlinear,.*', '^mbvl,.*', '^mcube,.*', '^meas,.*', '^mecer,.*', '^mediatek,.*', '^megachips,.*', '^mele,.*', '^melexis,.*', '^melfas,.*', '^mellanox,.*', '^memsensing,.*', '^memsic,.*', '^menlo,.*', '^mentor,.*', '^meraki,.*', '^merrii,.*', '^methode,.*', '^micrel,.*', '^microchip,.*', '^microcrystal,.*', '^micron,.*', '^microsoft,.*', '^microsys,.*', '^microtips,.*', '^mikroe,.*', '^mikrotik,.*', '^milkv,.*', '^miniand,.*', '^minix,.*', '^mips,.*', '^miramems,.*', '^mitsubishi,.*', '^mitsumi,.*', '^mixel,.*', '^miyoo,.*', '^mntre,.*', '^mobileye,.*', '^modtronix,.*', '^moortec,.*', '^mosaixtech,.*', '^motorcomm,.*', '^motorola,.*', '^moxa,.*', '^mpl,.*', '^mps,.*', '^mqmaker,.*', '^mrvl,.*', '^mscc,.*', '^msi,.*', '^mstar,.*', '^mti,.*', '^multi-inno,.*', '^mundoreader,.*', '^murata,.*', '^mxic,.*', '^mxicy,.*', '^myir,.*', '^national,.*', '^neardi,.*', '^nec,.*', '^neofidelity,.*', '^neonode,.*', '^netcube,.*', '^netgear,.*', '^netlogic,.*', '^netron-dy,.*', '^netronix,.*', '^netxeon,.*', '^neweast,.*', '^newhaven,.*', '^newvision,.*', '^nexbox,.*', '^nextthing,.*', '^ni,.*', '^nintendo,.*', '^nlt,.*', '^nokia,.*', '^nordic,.*', '^nothing,.*', '^novatek,.*', '^novtech,.*', '^numonyx,.*', '^nutsboard,.*', '^nuvoton,.*', '^nvd,.*', '^nvidia,.*', '^nxp,.*', '^oceanic,.*', '^ocs,.*', '^oct,.*', '^okaya,.*', '^oki,.*', '^olimex,.*', '^olpc,.*', '^oneplus,.*', '^onie,.*', '^onion,.*', '^onnn,.*', '^ontat,.*', '^opalkelly,.*', '^openailab,.*', '^opencores,.*', '^openembed,.*', '^openpandora,.*', '^openrisc,.*', '^openwrt,.*', '^option,.*', '^oranth,.*', '^orisetech,.*', '^ortustech,.*', '^osddisplays,.*', '^osmc,.*', '^ouya,.*', '^overkiz,.*', '^ovti,.*', '^oxsemi,.*', '^ozzmaker,.*', '^panasonic,.*', '^parade,.*', '^parallax,.*', '^pda,.*', '^pegatron,.*', '^pericom,.*', '^pervasive,.*', '^phicomm,.*', '^phytec,.*', '^picochip,.*', '^pinctrl-[0-9]+$', '^pine64,.*', '^pineriver,.*', '^pixcir,.*', '^plantower,.*', '^plathome,.*', '^plda,.*', '^plx,.*', '^ply,.*', '^pni,.*', '^pocketbook,.*', '^polaroid,.*', '^polyhex,.*', '^portwell,.*', '^poslab,.*', '^pov,.*', '^powertip,.*', '^powervr,.*', '^powkiddy,.*', '^pri,.*', '^primeview,.*', '^primux,.*', '^probox2,.*', '^prt,.*', '^pulsedlight,.*', '^purism,.*', '^puya,.*', '^qca,.*', '^qcom,.*', '^qemu,.*', '^qi,.*', '^qiaodian,.*', '^qihua,.*', '^qishenglong,.*', '^qnap,.*', '^quanta,.*', '^radxa,.*', '^raidsonic,.*', '^ralink,.*', '^ramtron,.*', '^raspberrypi,.*', '^raydium,.*', '^rda,.*', '^realtek,.*', '^relfor,.*', '^remarkable,.*', '^renesas,.*', '^rervision,.*', '^retronix,.*', '^revotics,.*', '^rex,.*', '^richtek,.*', '^ricoh,.*', '^rikomagic,.*', '^riot,.*', '^riscv,.*', '^rockchip,.*', '^rocktech,.*', '^rohm,.*', '^ronbo,.*', '^roofull,.*', '^roseapplepi,.*', '^rve,.*', '^saef,.*', '^samsung,.*', '^samtec,.*', '^sancloud,.*', '^sandisk,.*', '^satoz,.*', '^sbs,.*', '^schindler,.*', '^schneider,.*', '^sciosense,.*', '^seagate,.*', '^seeed,.*', '^seirobotics,.*', '^semtech,.*', '^senseair,.*', '^sensirion,.*', '^sensortek,.*', '^sercomm,.*', '^sff,.*', '^sgd,.*', '^sgmicro,.*', '^sgx,.*', '^sharp,.*', '^shift,.*', '^shimafuji,.*', '^shineworld,.*', '^shiratech,.*', '^si-en,.*', '^si-linux,.*', '^siemens,.*', '^sifive,.*', '^siflower,.*', '^sigma,.*', '^sii,.*', '^sil,.*', '^silabs,.*', '^silan,.*', '^silead,.*', '^silergy,.*', '^silex-insight,.*', '^siliconfile,.*', '^siliconmitus,.*', '^silvaco,.*', '^simtek,.*', '^sinlinx,.*', '^sinovoip,.*', '^sinowealth,.*', '^sipeed,.*', '^sirf,.*', '^sis,.*', '^sitronix,.*', '^skov,.*', '^skyworks,.*', '^smartlabs,.*', '^smartrg,.*', '^smi,.*', '^smsc,.*', '^snps,.*', '^sochip,.*', '^socionext,.*', '^solidrun,.*', '^solomon,.*', '^sony,.*', '^sophgo,.*', '^sourceparts,.*', '^spacemit,.*', '^spansion,.*', '^sparkfun,.*', '^spinalhdl,.*', '^sprd,.*', '^square,.*', '^ssi,.*', '^sst,.*', '^sstar,.*', '^st,.*', '^st-ericsson,.*', '^starfive,.*', '^starry,.*', '^startek,.*', '^starterkit,.*', '^ste,.*', '^stericsson,.*', '^storlink,.*', '^storm,.*', '^storopack,.*', '^summit,.*', '^sunchip,.*', '^sundance,.*', '^sunplus,.*', '^supermicro,.*', '^swir,.*', '^syna,.*', '^synology,.*', '^synopsys,.*', '^tbs,.*', '^tbs-biometrics,.*', '^tcg,.*', '^tcl,.*', '^tcs,.*', '^tcu,.*', '^tdo,.*', '^team-source-display,.*', '^technexion,.*', '^technologic,.*', '^techstar,.*', '^techwell,.*', '^teejet,.*', '^teltonika,.*', '^tempo,.*', '^terasic,.*', '^tesla,.*', '^test,.*', '^tfc,.*', '^thead,.*', '^thine,.*', '^thingyjp,.*', '^thundercomm,.*', '^thwc,.*', '^ti,.*', '^tianma,.*', '^tlm,.*', '^tmt,.*', '^topeet,.*', '^topic,.*', '^topland,.*', '^toppoly,.*', '^topwise,.*', '^toradex,.*', '^toshiba,.*', '^toumaz,.*', '^tpk,.*', '^tplink,.*', '^tpo,.*', '^tq,.*', '^transpeed,.*', '^traverse,.*', '^tronfy,.*', '^tronsmart,.*', '^truly,.*', '^tsd,.*', '^turing,.*', '^tyan,.*', '^tyhx,.*', '^u-blox,.*', '^u-boot,.*', '^ubnt,.*', '^ucrobotics,.*', '^udoo,.*', '^ufispace,.*', '^ugoos,.*', '^uni-t,.*', '^uniwest,.*', '^upisemi,.*', '^urt,.*', '^usi,.*', '^usr,.*', '^utoo,.*', '^v3,.*', '^vaisala,.*', '^vamrs,.*', '^variscite,.*', '^vdl,.*', '^vertexcom,.*', '^via,.*', '^vialab,.*', '^vicor,.*', '^videostrong,.*', '^virtio,.*', '^virtual,.*', '^vishay,.*', '^visionox,.*', '^vitesse,.*', '^vivante,.*', '^vivax,.*', '^vocore,.*', '^voipac,.*', '^voltafield,.*', '^vot,.*', '^vscom,.*', '^vxt,.*', '^wacom,.*', '^wanchanglong,.*', '^wand,.*', '^waveshare,.*', '^wd,.*', '^we,.*', '^welltech,.*', '^wetek,.*', '^wexler,.*', '^whwave,.*', '^wi2wi,.*', '^widora,.*', '^wiligear,.*', '^willsemi,.*', '^winbond,.*', '^wingtech,.*', '^winlink,.*', '^winsen,.*', '^winstar,.*', '^wirelesstag,.*', '^wits,.*', '^wlf,.*', '^wm,.*', '^wobo,.*', '^wolfvision,.*', '^x-powers,.*', '^xen,.*', '^xes,.*', '^xiaomi,.*', '^xillybus,.*', '^xingbangda,.*', '^xinpeng,.*', '^xiphera,.*', '^xlnx,.*', '^xnano,.*', '^xunlong,.*', '^xylon,.*', '^yadro,.*', '^yamaha,.*', '^yes-optoelectronics,.*', '^yic,.*', '^yiming,.*', '^ylm,.*', '^yna,.*', '^yones-toptech,.*', '^ys,.*', '^ysoft,.*', '^yuridenki,.*', '^yuzukihd,.*', '^zarlink,.*', '^zealz,.*', '^zeitec,.*', '^zidoo,.*', '^zii,.*', '^zinitix,.*', '^zkmagic,.*', '^zte,.*', '^zyxel,.*' from schema $id: http://devicetree.org/schemas/vendor-prefixes.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: syscon@1e6e2000 (aspeed,ast2600-scu): 'smp-memram@180' does not match any of the regexes: '^interrupt-controller@[0-9a-f]+$', '^p2a-control@[0-9a-f]+$', '^pinctrl(@[0-9a-f]+)?$', '^pinctrl-[0-9]+$', '^silicon-id@[0-9a-f]+$' from schema $id: http://devicetree.org/schemas/mfd/aspeed,ast2x00-scu.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /ahb/apb@1e6e0000/syscon@1e6e2000/smp-memram@180: failed to match any schema with compatible: ['aspeed,ast2600-smpmem'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /ahb/apb@1e6e0000/display@1e6e6000: failed to match any schema with compatible: ['aspeed,ast2600-gfx', 'syscon'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: adc@1e6e9000 (aspeed,ast2600-adc0): 'interrupts' does not match any of the regexes: '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: adc@1e6e9100 (aspeed,ast2600-adc1): 'interrupts' does not match any of the regexes: '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: crypto@1e6fa000 (aspeed,ast2600-acry): 'aspeed,ahbc' does not match any of the regexes: '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/crypto/aspeed,ast2600-acry.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: sdc@1e740000 (aspeed,ast2600-sd-controller): sdhci@1e740100:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: sdc@1e740000 (aspeed,ast2600-sd-controller): sdhci@1e740200:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /ahb/sdc@1e740000/sdhci@1e740100: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /ahb/sdc@1e740000/sdhci@1e740200: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /ahb/apb@1e780000/timer@1e782000: failed to match any schema with compatible: ['aspeed,ast2600-timer'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: lpc@1e789000 (aspeed,ast2600-lpc-v2): reg-io-width: 4 is not of type 'object' from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: lpc@1e789000 (aspeed,ast2600-lpc-v2): lpc-snoop@80: 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: kcs@24 (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: kcs@28 (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: kcs@2c (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: kcs@114 (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /ahb/apb@1e780000/lpc@1e789000/lhc@a0: failed to match any schema with compatible: ['aspeed,ast2600-lhc'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /ahb/apb@1e780000/lpc@1e789000/ibt@140: failed to match any schema with compatible: ['aspeed,ast2600-ibt-bmc'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: fan-controller@21 (maxim,max31790): '#address-cells', '#size-cells', 'channel@2', 'channel@5' do not match any of the regexes: '^fan-[0-9]+$', '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: fan-controller@27 (maxim,max31790): '#address-cells', '#size-cells', 'channel@2', 'channel@5' do not match any of the regexes: '^fan-[0-9]+$', '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: i2c@400 (aspeed,ast2600-i2c-bus): Unevaluated properties are not allowed ('aspeed,hw-timeout-ms' was unexpected) from schema $id: http://devicetree.org/schemas/i2c/aspeed,i2c.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: ssif-bmc@10 (ssif-bmc): 'alert-gpios', 'timeout-ms' do not match any of the regexes: '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/ipmi/ssif-bmc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /ahb/apb@1e780000/serial@1e78e000: failed to match any schema with compatible: ['aspeed,ast2600-uart'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: fsi@1e79b000 (aspeed,ast2600-fsi-master): compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /ahb/apb@1e790000/fsi@1e79b000: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: fsi@1e79b100 (aspeed,ast2600-fsi-master): compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /ahb/apb@1e790000/fsi@1e79b100: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /ahb/apb@1e790000/dma-controller@1e79e000: failed to match any schema with compatible: ['aspeed,ast2600-udma'] ^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2025-06-20 6:52 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-06-18 9:40 [PATCH 0/2] ARM: dts: Add support for Meta Clemente BMC Leo Wang
2025-06-18 9:40 ` [PATCH 1/2] Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml Leo Wang
2025-06-20 6:25 ` Andrew Jeffery
2025-06-20 6:37 ` Krzysztof Kozlowski
2025-06-20 6:51 ` Geert Uytterhoeven
2025-06-18 9:40 ` [PATCH 2/2] ARM: dts: aspeed: clemente: add Meta Clemente BMC Leo Wang
2025-06-20 6:39 ` Andrew Jeffery
2025-06-18 13:36 ` [PATCH 0/2] ARM: dts: Add support for " Rob Herring (Arm)
[not found] <20250513031010.267994-1-LeoWang>
2025-05-13 3:10 ` [PATCH 2/2] ARM: dts: aspeed: clemente: add " leo.jt.wang
2025-05-13 7:44 ` Krzysztof Kozlowski
2025-05-13 12:38 ` Andrew Lunn
2025-05-14 13:11 ` Rob Herring (Arm)
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).