From: "Kathpalia, Tanmay" <tanmay.kathpalia@altera.com>
To: Krzysztof Kozlowski <krzk@kernel.org>
Cc: linux-mmc@vger.kernel.org, ulf.hansson@linaro.org,
Dinh Nguyen <dinguyen@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 5/9] arm64: dts: agilex5: add SOCDK eMMC daughter board support
Date: Thu, 2 Jul 2026 14:37:30 +0530 [thread overview]
Message-ID: <75f7416b-c75a-4785-a310-b3ce2638aa2d@altera.com> (raw)
In-Reply-To: <20260629-wild-dramatic-clam-80eb5c@quoll>
On 6/29/2026 12:37 PM, Krzysztof Kozlowski wrote:
> On Sat, Jun 27, 2026 at 01:14:50PM -0700, Tanmay Kathpalia wrote:
>> Add socfpga_agilex5_socdk_emmc.dts for the Agilex5 SoCDK eMMC daughter
>> board variant. Define board-specific regulators at the DTS root: a
>> fixed 3.3V supply for card power and a fixed 1.8V supply for eMMC I/O
>> voltage.
>>
>> Enable the shared SD/eMMC controller for eMMC-only operation with an
>> 8-bit bus, HS200 and HS400 modes at 1.8V signaling, and a 200 MHz
>> maximum clock frequency.
>>
>> Signed-off-by: Tanmay Kathpalia <tanmay.kathpalia@altera.com>
>> ---
>> arch/arm64/boot/dts/intel/Makefile | 1 +
>> .../dts/intel/socfpga_agilex5_socdk_emmc.dts | 120 ++++++++++++++++++
>> 2 files changed, 121 insertions(+)
>> create mode 100644 arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_emmc.dts
>>
>> diff --git a/arch/arm64/boot/dts/intel/Makefile b/arch/arm64/boot/dts/intel/Makefile
>> index 33fcc55d0cb9..5bbbcfda1f48 100644
>> --- a/arch/arm64/boot/dts/intel/Makefile
>> +++ b/arch/arm64/boot/dts/intel/Makefile
>> @@ -8,5 +8,6 @@ dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_agilex_n6000.dtb \
>> socfpga_agilex5_socdk_013b.dtb \
>> socfpga_agilex5_socdk_modular.dtb \
>> socfpga_agilex5_socdk_nand.dtb \
>> + socfpga_agilex5_socdk_emmc.dtb \
> Same mistakes... Do not introduce random order.
Ack.
>
>
prev parent reply other threads:[~2026-07-02 9:07 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20260627201457.12318-1-tanmay.kathpalia@altera.com>
2026-06-27 20:14 ` [PATCH v2 1/9] dt-bindings: reset: altr: add COMBOPHY_RESET for Agilex5 Tanmay Kathpalia
2026-07-02 15:53 ` (subset) " Philipp Zabel
2026-06-27 20:14 ` [PATCH v2 2/9] dt-bindings: mmc: cdns,sdhci: add SD6HC support and PHY properties Tanmay Kathpalia
2026-06-27 20:26 ` sashiko-bot
2026-06-28 9:46 ` Kathpalia, Tanmay
2026-06-29 7:04 ` Krzysztof Kozlowski
2026-07-02 8:58 ` Kathpalia, Tanmay
2026-06-27 20:14 ` [PATCH v2 3/9] arm64: dts: agilex5: add Cadence SD6HC controller and SOCDK enablement Tanmay Kathpalia
2026-06-27 20:24 ` sashiko-bot
2026-06-28 9:55 ` Kathpalia, Tanmay
2026-06-29 7:06 ` Krzysztof Kozlowski
2026-07-02 9:01 ` Kathpalia, Tanmay
2026-06-27 20:14 ` [PATCH v2 4/9] dt-bindings: arm: intel: add Agilex5 SOCDK eMMC board variant Tanmay Kathpalia
2026-06-29 7:06 ` Krzysztof Kozlowski
2026-07-02 9:07 ` Kathpalia, Tanmay
2026-06-27 20:14 ` [PATCH v2 5/9] arm64: dts: agilex5: add SOCDK eMMC daughter board support Tanmay Kathpalia
2026-06-29 7:07 ` Krzysztof Kozlowski
2026-07-02 9:07 ` Kathpalia, Tanmay [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=75f7416b-c75a-4785-a310-b3ce2638aa2d@altera.com \
--to=tanmay.kathpalia@altera.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dinguyen@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=krzk@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=robh@kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox