[PATCH 3/3] arm64: dts: meson-gx: Make mmc host controller interrupts level-sensitive

[Heiner Kallweit <hkallweit1@gmail.com>]

The usage of edge-triggered interrupts lead to lost interrupts under load,
see [0]. This was confirmed to be fixed by using level-triggered
interrupts.
The report was about SDIO. However, as the host controller is the same
for SD and MMC, apply the change to all mmc controller instances.

[0] https://www.spinics.net/lists/linux-mmc/msg73991.html

Fixes: ef8d2ffedf18 ("ARM64: dts: meson-gxbb: add MMC support")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
 arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index e3c12e0be..5eed15035 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -603,21 +603,21 @@ apb: apb@d0000000 {
 			sd_emmc_a: mmc@70000 {
 				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
 				reg = <0x0 0x70000 0x0 0x800>;
-				interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>;
+				interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			sd_emmc_b: mmc@72000 {
 				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
 				reg = <0x0 0x72000 0x0 0x800>;
-				interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
+				interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			sd_emmc_c: mmc@74000 {
 				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
 				reg = <0x0 0x74000 0x0 0x800>;
-				interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
+				interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 		};
-- 
2.39.1