Re: [PATCH net-next 1/2] dt-bindings: net: airoha,en8811h: Add en8811h serdes polarity

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 06/02/2024 20:47, Eric Woudstra wrote:
> The en8811h phy can be set with serdes polarity reversed on rx and/or tx.
> 
> Changed from rfc patch:
> 
> Explicitly say what -rx and -tx means.

I don't know what does it mean. This is v1, so we don't expect
changelog. If this is v2 (because there was RFC/RFT/RFkisses/RFhugs
which are states of patchsets, not versions), then please mark it as v2
and put changelog under ---.

> 
> Signed-off-by: Eric Woudstra <ericwouds@gmail.com>
> ---
>  .../bindings/net/airoha,en8811h.yaml          | 44 +++++++++++++++++++
>  1 file changed, 44 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/airoha,en8811h.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/airoha,en8811h.yaml b/Documentation/devicetree/bindings/net/airoha,en8811h.yaml
> new file mode 100644
> index 000000000000..99898e2bed64
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/airoha,en8811h.yaml
> @@ -0,0 +1,44 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/airoha,en8811h.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Airoha EN8811H PHY
> +
> +maintainers:
> +  - Eric Woudstra <ericwouds@gmail.com>
> +
> +description:
> +  Bindings for Airoha EN8811H PHY

Drop "Bindings for" and instead describe the hardware. You are
duplicating now title.


> +
> +allOf:
> +  - $ref: ethernet-phy.yaml#
> +
> +properties:

This won't match to anything... missing compatible. You probably want to
align with ongoing work on the lists.


> +  airoha,pnswap-rx:
> +    type: boolean
> +    description:
> +      Reverse rx polarity of the SERDES. This is the receiving
> +      side of the lines from the MAC towards the EN881H.
> +
> +

Only one blank line.

> +  airoha,pnswap-tx:
> +    type: boolean
> +    description:
> +      Reverse tx polarity of SERDES. This is the transmitting
> +      side of the lines from EN8811H towards the MAC.
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    mdio {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        ethphy1: ethernet-phy@1 {
> +                reg = <1>;
> +                airoha,pnswap-rx;

You have broken indentation.

Use 4 spaces for example indentation.

> +        };
> +    };

Best regards,
Krzysztof