From: <Tudor.Ambarus@microchip.com>
To: <sai.krishna.potthuri@amd.com>, <pratyush@kernel.org>,
<michael@walle.cc>, <miquel.raynal@bootlin.com>, <richard@nod.at>,
<vigneshr@ti.com>, <robh+dt@kernel.org>,
<krzysztof.kozlowski+dt@linaro.org>
Cc: <devicetree@vger.kernel.org>, <linux-mtd@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <saikrishna12468@gmail.com>,
<git@amd.com>
Subject: Re: [PATCH v3 2/2] mtd: spi-nor: Add support for flash reset
Date: Mon, 3 Oct 2022 09:43:14 +0000 [thread overview]
Message-ID: <7777b2fc-8c22-22dd-1ffd-dfe8a21ea0d4@microchip.com> (raw)
In-Reply-To: <20220908064428.2962-3-sai.krishna.potthuri@amd.com>
On 9/8/22 09:44, Sai Krishna Potthuri wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> Add support for spi-nor flash reset via GPIO controller by reading the
> reset-gpio property. If there is a valid GPIO specifier then reset will
> be performed by asserting and deasserting the GPIO using gpiod APIs
> otherwise it will not perform any operation.
>
> Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
> Reviewed-by: Michael Walle <michael@walle.cc>
> ---
> drivers/mtd/spi-nor/core.c | 25 +++++++++++++++++++++++++
> 1 file changed, 25 insertions(+)
>
> diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
> index f2c64006f8d7..a78ab9bae2be 100644
> --- a/drivers/mtd/spi-nor/core.c
> +++ b/drivers/mtd/spi-nor/core.c
> @@ -2933,6 +2933,27 @@ static void spi_nor_set_mtd_info(struct spi_nor *nor)
> mtd->_put_device = spi_nor_put_device;
> }
>
> +static int spi_nor_hw_reset(struct spi_nor *nor)
> +{
> + struct gpio_desc *reset;
> +
> + reset = devm_gpiod_get_optional(nor->dev, "reset", GPIOD_OUT_LOW);
> + if (IS_ERR_OR_NULL(reset))
> + return PTR_ERR_OR_ZERO(reset);
> +
> + /*
> + * Experimental delay values by looking at different flash device
> + * vendors datasheets.
> + */
> + usleep_range(1, 5);
> + gpiod_set_value_cansleep(reset, 1);
> + usleep_range(100, 150);
> + gpiod_set_value_cansleep(reset, 0);
> + usleep_range(1000, 1200);
> +
> + return 0;
> +}
> +
> int spi_nor_scan(struct spi_nor *nor, const char *name,
> const struct spi_nor_hwcaps *hwcaps)
> {
> @@ -2965,6 +2986,10 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
> if (!nor->bouncebuf)
> return -ENOMEM;
>
> + ret = spi_nor_hw_reset(nor);
Should we condition the calling of this method by the absence of the "broken-flash-reset"
dt prop?
> + if (ret)
> + return ret;
> +
> info = spi_nor_get_flash_info(nor, name);
> if (IS_ERR(info))
> return PTR_ERR(info);
> --
> 2.17.1
>
--
Cheers,
ta
next prev parent reply other threads:[~2022-10-03 9:46 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-08 6:44 [PATCH v3 0/2] mtd: spi-nor: Add flash device reset support Sai Krishna Potthuri
2022-09-08 6:44 ` [PATCH v3 1/2] dt-bindings: mtd: spi-nor: Add reset-gpios property Sai Krishna Potthuri
2022-09-08 11:05 ` Krzysztof Kozlowski
2022-09-08 6:44 ` [PATCH v3 2/2] mtd: spi-nor: Add support for flash reset Sai Krishna Potthuri
2022-10-03 9:43 ` Tudor.Ambarus [this message]
2022-10-03 10:06 ` Potthuri, Sai Krishna
2022-10-05 5:48 ` Tudor.Ambarus
2022-10-25 2:32 ` [PATCH v3 0/2] mtd: spi-nor: Add flash device reset support Tudor Ambarus
2022-10-25 2:40 ` Tudor Ambarus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7777b2fc-8c22-22dd-1ffd-dfe8a21ea0d4@microchip.com \
--to=tudor.ambarus@microchip.com \
--cc=devicetree@vger.kernel.org \
--cc=git@amd.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=michael@walle.cc \
--cc=miquel.raynal@bootlin.com \
--cc=pratyush@kernel.org \
--cc=richard@nod.at \
--cc=robh+dt@kernel.org \
--cc=sai.krishna.potthuri@amd.com \
--cc=saikrishna12468@gmail.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox