devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Heiko Stübner" <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
To: Jeffy Chen <jeffy.chen-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Cc: linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
	Ian Campbell
	<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
	Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
	Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Subject: Re: [PATCH v1 7/8] ARM: dts: rockchip: add core rk3228 dtsi
Date: Fri, 11 Dec 2015 11:12:10 +0100	[thread overview]
Message-ID: <7783766.YsX4m8bWe1@diego> (raw)
In-Reply-To: <566A2CB7.4050801-TNX95d0MmH7DzftRWevZcw@public.gmane.org>

Hi Jeffy,

Am Freitag, 11. Dezember 2015, 09:53:59 schrieb Jeffy Chen:
> On 2015-12-10 8:32, Heiko Stuebner wrote:
> > Am Mittwoch, 9. Dezember 2015, 17:04:12 schrieb Jeffy Chen:
> >> Initial release for rk3228 shared dtsi.
> >> 
> >> Signed-off-by: Jeffy Chen <jeffy.chen-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
> >> ---
> >> 
> >>   arch/arm/boot/dts/rk3228.dtsi | 478
> >>   ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 478
> >>   insertions(+)
> >>   create mode 100644 arch/arm/boot/dts/rk3228.dtsi
> >> 
> >> diff --git a/arch/arm/boot/dts/rk3228.dtsi
> >> b/arch/arm/boot/dts/rk3228.dtsi
> >> new file mode 100644
> >> index 0000000..d6b3e40
> >> --- /dev/null
> >> +++ b/arch/arm/boot/dts/rk3228.dtsi
> >> @@ -0,0 +1,478 @@
> >> +/*
> >> + * This file is dual-licensed: you can use it either under the terms
> >> + * of the GPL or the X11 license, at your option. Note that this dual
> >> + * licensing only applies to this file, and not this project as a
> >> + * whole.
> >> + *
> >> + *  a) This file is free software; you can redistribute it and/or
> >> + *     modify it under the terms of the GNU General Public License as
> >> + *     published by the Free Software Foundation; either version 2 of
> >> the
> >> + *     License, or (at your option) any later version.
> >> + *
> >> + *     This file is distributed in the hope that it will be useful,
> >> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> >> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> >> + *     GNU General Public License for more details.
> >> + *
> >> + * Or, alternatively,
> >> + *
> >> + *  b) Permission is hereby granted, free of charge, to any person
> >> + *     obtaining a copy of this software and associated documentation
> >> + *     files (the "Software"), to deal in the Software without
> >> + *     restriction, including without limitation the rights to use,
> >> + *     copy, modify, merge, publish, distribute, sublicense, and/or
> >> + *     sell copies of the Software, and to permit persons to whom the
> >> + *     Software is furnished to do so, subject to the following
> >> + *     conditions:
> >> + *
> >> + *     The above copyright notice and this permission notice shall be
> >> + *     included in all copies or substantial portions of the Software.
> >> + *
> >> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> >> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> >> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> >> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> >> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> >> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> >> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> >> + *     OTHER DEALINGS IN THE SOFTWARE.
> >> + */
> >> +
> >> +#include <dt-bindings/gpio/gpio.h>
> >> +#include <dt-bindings/interrupt-controller/irq.h>
> >> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> >> +#include <dt-bindings/pinctrl/rockchip.h>
> >> +#include <dt-bindings/clock/rk3228-cru.h>
> >> +#include "skeleton.dtsi"
> >> +
> >> +/ {
> >> +	compatible = "rockchip,rk3228";
> >> +
> >> +	interrupt-parent = <&gic>;
> >> +
> >> +	aliases {
> >> +		serial0 = &uart0;
> >> +		serial1 = &uart1;
> >> +		serial2 = &uart2;
> >> +	};
> >> +
> >> +	memory {
> >> +		device_type = "memory";
> >> +		reg = <0x60000000 0x40000000>;
> >> +	};
> > 
> > The amount of memory is a property of the board
> 
> done.
> 
> >> +
> >> +	cpus {
> >> +		#address-cells = <1>;
> >> +		#size-cells = <0>;
> > 
> > no enable-method?
> > 
> > As the rk3228 also does not have a pmu, does the newly created
> > "rockchip,rk3036-smp" work for you?
> 
> unlucky, that doesn't work...and our 3.10 kernel is using psci for
> rk3228's smp ops, maybe i should check that too, but i know nothing
> about psci for now :(

Using PSCI on more rockchip socs will make the ARM people very happy ;-) .

So definitly no argument from me against it. I guess you should only need the 
enable-method and psci node you should already have in your 3.10 dts, to 
actually enable it.

cpu@xxx {
		enable-method = "psci";
};

psci {
	compatible = "arm,psci-0.2";
	...
};


But we can of course add that in a later patch as well.


Heiko
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2015-12-11 10:12 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-09  9:04 [PATCH v1 0/8] This serial of patches add dts/pinctrl/clock-tree/doc for rk3228 Jeffy Chen
2015-12-09  9:04 ` [PATCH v1 1/8] pinctrl: rockchip: add support for the rk3228 Jeffy Chen
2015-12-09 11:30   ` Heiko Stübner
2015-12-09 20:09   ` Rob Herring
2015-12-11 18:10   ` Linus Walleij
2015-12-09  9:04 ` [PATCH v1 2/8] clk: rockchip: add dt-binding header for rk3228 Jeffy Chen
     [not found]   ` <1449651853-1667-3-git-send-email-jeffy.chen-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2015-12-09 23:17     ` Heiko Stuebner
     [not found] ` <1449651853-1667-1-git-send-email-jeffy.chen-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2015-12-09  9:04   ` [PATCH v1 4/8] dt-bindings: add documentation of rk3228 clock controller Jeffy Chen
2015-12-09 20:12     ` Rob Herring
2015-12-09 23:11       ` Heiko Stuebner
     [not found]     ` <1449651853-1667-5-git-send-email-jeffy.chen-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2015-12-09 23:17       ` Heiko Stuebner
2015-12-09  9:04   ` [PATCH v1 7/8] ARM: dts: rockchip: add core rk3228 dtsi Jeffy Chen
2015-12-10  0:32     ` Heiko Stuebner
2015-12-11  1:53       ` Jeffy Chen
     [not found]         ` <566A2CB7.4050801-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2015-12-11 10:12           ` Heiko Stübner [this message]
2015-12-12  2:34             ` Jeffy Chen
2015-12-09  9:04   ` [PATCH v1 8/8] ARM: dts: rockchip: add rk3228-evb board Jeffy Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=7783766.YsX4m8bWe1@diego \
    --to=heiko-4mtyjxux2i+zqb+pc5nmwq@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
    --cc=jeffy.chen-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
    --cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).