[PATCH v3 00/12] Add R8A7792/Blanche board support

[PATCH v3 00/12] Add R8A7792/Blanche board support

[Sergei Shtylyov]

Hello.

   Here's the set of 12 patches against Simon Horman's 'renesas.git' repo,
'renesas-devel-20160606-v4.7-rc2' tag. We add the device tree support for
the R8A7792-based Blanche board. Added in this version is the SMP support.
The R-Car 'clk' driver patch was posted separately and 2 'clk' binding patches
were split from this series...

[01/12] ARM: shmobile: r8a7792: add clock index macros
[02/12] ARM: shmobile: r8a7792: add power domain index macros
[03/12] soc: renesas: rcar-sysc: add R8A7792 support
[04/12] ARM: shmobile: r8a7792: basic SoC support
[05/12] ARM: shmobile: r8a7792: add SMP support
[06/12] ARM: dts: r8a7792: initial SoC device tree
[07/12] ARM: dts: r8a7792: add SYS-DMAC support
[08/12] ARM: dts: r8a7792: add [H]SCIF support
[09/12] ARM dts: r8a7792: add IRQC support
[10/12] DT: arm: shmobile: document Blanche board
[11/12] ARM: dts: blanche: initial device tree
[12/12] ARM: dts: blanche: add Ethernet support

WBR, Sergei

[PATCH v3 01/12] ARM: shmobile: r8a7792: add clock index macros

[Sergei Shtylyov]

Add macros usable by the device tree sources to reference the R8A7792
clocks  by index.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
Changes in version 2:
- removed the SDH, SD0, and SD1 clocks;
- added RCAN and ADSP clock indeces;
- fixed SYS-DMAC0/1 clock indeces.

 include/dt-bindings/clock/r8a7792-clock.h |  103 ++++++++++++++++++++++++++++++
 1 file changed, 103 insertions(+)

Index: renesas/include/dt-bindings/clock/r8a7792-clock.h
===================================================================
--- /dev/null
+++ renesas/include/dt-bindings/clock/r8a7792-clock.h
@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_R8A7792_H__
+#define __DT_BINDINGS_CLOCK_R8A7792_H__
+
+/* CPG */
+#define R8A7792_CLK_MAIN		0
+#define R8A7792_CLK_PLL0		1
+#define R8A7792_CLK_PLL1		2
+#define R8A7792_CLK_PLL3		3
+#define R8A7792_CLK_LB			4
+#define R8A7792_CLK_QSPI		5
+#define R8A7792_CLK_Z			6
+#define R8A7792_CLK_RCAN		7
+#define R8A7792_CLK_ADSP		8
+
+/* MSTP0 */
+#define R8A7792_CLK_MSIOF0		0
+
+/* MSTP1 */
+#define R8A7792_CLK_TMU1		11
+#define R8A7792_CLK_TMU3		21
+#define R8A7792_CLK_TMU2		22
+#define R8A7792_CLK_CMT0		24
+#define R8A7792_CLK_TMU0		25
+#define R8A7792_CLK_VSP1DU1		27
+#define R8A7792_CLK_VSP1DU0		28
+#define R8A7792_CLK_VSP1_SY		31
+
+/* MSTP2 */
+#define R8A7792_CLK_MSIOF1		8
+#define R8A7792_CLK_SYS_DMAC1		18
+#define R8A7792_CLK_SYS_DMAC0		19
+
+/* MSTP3 */
+#define R8A7792_CLK_TPU0		4
+#define R8A7792_CLK_SDHI0		14
+#define R8A7792_CLK_CMT1		29
+
+/* MSTP4 */
+#define R8A7792_CLK_IRQC		7
+
+/* MSTP5 */
+#define R8A7792_CLK_AUDIO_DMAC0		2
+#define R8A7792_CLK_THERMAL		22
+#define R8A7792_CLK_PWM			23
+
+/* MSTP7 */
+#define R8A7792_CLK_HSCIF1		16
+#define R8A7792_CLK_HSCIF0		17
+#define R8A7792_CLK_SCIF3		18
+#define R8A7792_CLK_SCIF2		19
+#define R8A7792_CLK_SCIF1		20
+#define R8A7792_CLK_SCIF0		21
+#define R8A7792_CLK_DU1			23
+#define R8A7792_CLK_DU0			24
+
+/* MSTP8 */
+#define R8A7792_CLK_VIN5		4
+#define R8A7792_CLK_VIN4		5
+#define R8A7792_CLK_VIN3		8
+#define R8A7792_CLK_VIN2		9
+#define R8A7792_CLK_VIN1		10
+#define R8A7792_CLK_VIN0		11
+#define R8A7792_CLK_ETHERAVB		12
+
+/* MSTP9 */
+#define R8A7792_CLK_GPIO7		4
+#define R8A7792_CLK_GPIO6		5
+#define R8A7792_CLK_GPIO5		7
+#define R8A7792_CLK_GPIO4		8
+#define R8A7792_CLK_GPIO3		9
+#define R8A7792_CLK_GPIO2		10
+#define R8A7792_CLK_GPIO1		11
+#define R8A7792_CLK_GPIO0		12
+#define R8A7792_CLK_GPIO11		13
+#define R8A7792_CLK_GPIO10		14
+#define R8A7792_CLK_CAN1		15
+#define R8A7792_CLK_CAN0		16
+#define R8A7792_CLK_QSPI_MOD		17
+#define R8A7792_CLK_GPIO9		19
+#define R8A7792_CLK_GPIO8		21
+#define R8A7792_CLK_I2C5		25
+#define R8A7792_CLK_IICDVFS		26
+#define R8A7792_CLK_I2C4		27
+#define R8A7792_CLK_I2C3		28
+#define R8A7792_CLK_I2C2		29
+#define R8A7792_CLK_I2C1		30
+#define R8A7792_CLK_I2C0		31
+
+/* MSTP10 */
+#define R8A7792_CLK_SSI_ALL		5
+#define R8A7792_CLK_SSI4		11
+#define R8A7792_CLK_SSI3		12
+
+#endif /* __DT_BINDINGS_CLOCK_R8A7792_H__ */

[PATCH v3 02/12] ARM: shmobile: r8a7792: add power domain index macros

[Sergei Shtylyov]

Add macros usable by the device tree sources to reference R8A7792 SYSC power
domains by index.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

---
Changes in version 2:
- added Geert's tag.

 include/dt-bindings/power/r8a7792-sysc.h |   26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

Index: renesas/include/dt-bindings/power/r8a7792-sysc.h
===================================================================
--- /dev/null
+++ renesas/include/dt-bindings/power/r8a7792-sysc.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2016 Cogent Embedded Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+#ifndef __DT_BINDINGS_POWER_R8A7792_SYSC_H__
+#define __DT_BINDINGS_POWER_R8A7792_SYSC_H__
+
+/*
+ * These power domain indices match the numbers of the interrupt bits
+ * representing the power areas in the various Interrupt Registers
+ * (e.g. SYSCISR, Interrupt Status Register)
+ */
+
+#define R8A7792_PD_CA15_CPU0		0
+#define R8A7792_PD_CA15_CPU1		1
+#define R8A7792_PD_CA15_SCU		12
+#define R8A7792_PD_SGX			20
+#define R8A7792_PD_IMP			24
+
+/* Always-on power area */
+#define R8A7792_PD_ALWAYS_ON		32
+
+#endif /* __DT_BINDINGS_POWER_R8A7792_SYSC_H__ */

[PATCH v3 06/12] ARM: dts: r8a7792: initial SoC device tree

[Sergei Shtylyov]

The initial R8A7792 SoC device tree including CPU cores, GIC, timer, SYSC,
and the required  clock descriptions.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
Changes in version 3:
- moved the fixed factor clocks under the "soc" node;
- added back the CPU1 node, adjusted the changelog.

Changes in version 2:
- explicitly included the IRQ header;
- removed the CPU1 node;
- removed the audio and PCIe bus clocks;
- removed the SDH, SD0, and SD1 CPG clocks;
- added RCAN and ADSP CPG clocks;
- removed the PLL1/2, Z2, ZS, I, B, P, CL, M2, RCLK, OSCCLK, ZB3, ZB3D2, DDR,
  and MP fixed factor clocks;
- fixed up the parent and divisor for the CP fixed factor clock;
- swapped  the SYS-DMAC0/1 clocks;
- removed  all gated clocks except the [H]SCIF, IRQC, and SYS-DMAC ones;
- created  the "soc" subnode, moving the SoC  device  nodes there;
- removed  the "clocks" node, moving its fixed clock  subnodes to the root and
  the MSTP subnodes into the "soc" node.

 arch/arm/boot/dts/r8a7792.dtsi |  180 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 180 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7792.dtsi
===================================================================
--- /dev/null
+++ renesas/arch/arm/boot/dts/r8a7792.dtsi
@@ -0,0 +1,180 @@
+/*
+ * Device Tree Source for the r8a7792 SoC
+ *
+ * Copyright (C) 2016 Cogent Embedded Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/clock/r8a7792-clock.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a7792-sysc.h>
+
+/ {
+	compatible = "renesas,r8a7792";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+			clock-frequency = <1000000000>;
+			clocks = <&cpg_clocks R8A7792_CLK_Z>;
+			power-domains = <&sysc R8A7792_PD_CA15_CPU0>;
+			next-level-cache = <&L2_CA15>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+			clock-frequency = <1000000000>;
+			power-domains = <&sysc R8A7792_PD_CA15_CPU1>;
+			next-level-cache = <&L2_CA15>;
+		};
+
+		L2_CA15: cache-controller@0 {
+			compatible = "cache";
+			reg = <0>;
+			cache-unified;
+			cache-level = <2>;
+			power-domains = <&sysc R8A7792_PD_CA15_SCU>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@f1001000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0 0xf1001000 0 0x1000>,
+			      <0 0xf1002000 0 0x1000>,
+			      <0 0xf1004000 0 0x2000>,
+			      <0 0xf1006000 0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+				      IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		timer {
+			compatible = "arm,armv7-timer";
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+				      IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+				      IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
+				      IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
+				      IRQ_TYPE_LEVEL_LOW)>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a7792-sysc";
+			reg = <0 0xe6180000 0 0x0200>;
+			#power-domain-cells = <1>;
+		};
+
+		/* Special CPG clocks */
+		cpg_clocks: cpg_clocks@e6150000 {
+			compatible = "renesas,r8a7792-cpg-clocks",
+				     "renesas,rcar-gen2-cpg-clocks";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>;
+			#clock-cells = <1>;
+			clock-output-names = "main", "pll0", "pll1", "pll3",
+					     "lb", "qspi", "z", "rcan", "adsp";
+			#power-domain-cells = <0>;
+		};
+
+		/* Fixed factor clocks */
+		zs_clk: zs {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <6>;
+			clock-mult = <1>;
+		};
+		p_clk: p {
+		compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <24>;
+			clock-mult = <1>;
+		};
+		cp_clk: cp {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <3>;
+			clock-mult = <1>;
+		};
+
+		/* Gate clocks */
+		mstp2_clks: mstp2_clks@e6150138 {
+			compatible = "renesas,r8a7792-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
+			clocks = <&zs_clk>, <&zs_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7792_CLK_SYS_DMAC1 R8A7792_CLK_SYS_DMAC0
+			>;
+			clock-output-names = "sys-dmac1", "sys-dmac0";
+		};
+		mstp4_clks: mstp4_clks@e6150140 {
+			compatible = "renesas,r8a7792-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>;
+			clocks = <&cp_clk>;
+			#clock-cells = <1>;
+			clock-indices = <R8A7792_CLK_IRQC>;
+			clock-output-names = "irqc";
+		};
+		mstp7_clks: mstp7_clks@e615014c {
+			compatible = "renesas,r8a7792-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
+			clocks = <&zs_clk>, <&zs_clk>, <&p_clk>, <&p_clk>,
+				 <&p_clk>, <&p_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7792_CLK_HSCIF1 R8A7792_CLK_HSCIF0
+				R8A7792_CLK_SCIF3 R8A7792_CLK_SCIF2
+				R8A7792_CLK_SCIF1 R8A7792_CLK_SCIF0
+			>;
+			clock-output-names = "hscif1", "hscif0", "scif3",
+					     "scif2", "scif1", "scif0",
+					     "du1", "du0";
+		};
+	};
+
+	/* External root clock */
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	/* External SCIF clock */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+};

[PATCH v3 07/12] ARM: dts: r8a7792: add SYS-DMAC support

[Sergei Shtylyov]

Describe SYS-DMAC0/1 in the R8A7792 device tree.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

---
Changes in version 3:
- refreshed the patch.

Changes in version 2:
- resolved reject, indenting the device nodes that are now under the "soc" node;
- added Simon's ACK and Geert's tag too.

 arch/arm/boot/dts/r8a7792.dtsi |   64 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 64 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7792.dtsi
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7792.dtsi
+++ renesas/arch/arm/boot/dts/r8a7792.dtsi
@@ -88,6 +88,70 @@
 			#power-domain-cells = <1>;
 		};
 
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a7792",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x20000>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14";
+			clocks = <&mstp2_clks R8A7792_CLK_SYS_DMAC0>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		dmac1: dma-controller@e6720000 {
+			compatible = "renesas,dmac-r8a7792",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6720000 0 0x20000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14";
+			clocks = <&mstp2_clks R8A7792_CLK_SYS_DMAC1>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
 		/* Special CPG clocks */
 		cpg_clocks: cpg_clocks@e6150000 {
 			compatible = "renesas,r8a7792-cpg-clocks",

[PATCH v3 08/12] ARM: dts: r8a7792: add [H]SCIF support

[Sergei Shtylyov]

Describe [H]SCIFs in the R8A7792 device tree.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

---
Changes in version 3:
- refreshed the patch.

Changes in version 2:
- resolved reject, indenting the device nodes that are now under the "soc" node;
- added Geert's tag.

 arch/arm/boot/dts/r8a7792.dtsi |   90 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 90 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7792.dtsi
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7792.dtsi
+++ renesas/arch/arm/boot/dts/r8a7792.dtsi
@@ -152,6 +152,96 @@
 			dma-channels = <15>;
 		};
 
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a7792",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp7_clks R8A7792_CLK_SCIF0>, <&zs_clk>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+			       <&dmac1 0x29>, <&dmac1 0x2a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a7792",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp7_clks R8A7792_CLK_SCIF1>, <&zs_clk>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+			       <&dmac1 0x2d>, <&dmac1 0x2e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e58000 {
+			compatible = "renesas,scif-r8a7792",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e58000 0 64>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp7_clks R8A7792_CLK_SCIF2>, <&zs_clk>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+			       <&dmac1 0x2b>, <&dmac1 0x2c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6ea8000 {
+			compatible = "renesas,scif-r8a7792",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ea8000 0 64>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp7_clks R8A7792_CLK_SCIF3>, <&zs_clk>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+			       <&dmac1 0x2f>, <&dmac1 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		hscif0: serial@e62c0000 {
+			compatible = "renesas,hscif-r8a7792",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c0000 0 96>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp7_clks R8A7792_CLK_HSCIF0>, <&zs_clk>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+			       <&dmac1 0x39>, <&dmac1 0x3a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e62c8000 {
+			compatible = "renesas,hscif-r8a7792",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c8000 0 96>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp7_clks R8A7792_CLK_HSCIF1>, <&zs_clk>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+			       <&dmac1 0x4d>, <&dmac1 0x4e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
 		/* Special CPG clocks */
 		cpg_clocks: cpg_clocks@e6150000 {
 			compatible = "renesas,r8a7792-cpg-clocks",

[PATCH v3 09/12] ARM: dts: r8a7792: add IRQC support

[Sergei Shtylyov]

Describe the IRQC interrupt controller in the R8A7792 device tree.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

---
Changes in version 3:
- refreshed the patch.

Changes in version 2:
- resolved reject, indenting the IRQC node that is now under the "soc" node;
- added Geert's tag.

 arch/arm/boot/dts/r8a7792.dtsi |   13 +++++++++++++
 1 file changed, 13 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7792.dtsi
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7792.dtsi
+++ renesas/arch/arm/boot/dts/r8a7792.dtsi
@@ -70,6 +70,19 @@
 				      IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
+		irqc: interrupt-controller@e61c0000 {
+			compatible = "renesas,irqc-r8a7792", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp4_clks R8A7792_CLK_IRQC>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
 		timer {
 			compatible = "arm,armv7-timer";
 			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |

[PATCH v3 10/12] DT: arm: shmobile: document Blanche board

[Sergei Shtylyov]

Document the Blanche device tree bindings, listing it as a supported board.

This allows to use checkpatch.pl to validate .dts files referring to the
Blanche board.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Rob Herring <robh@kernel.org>

---
Changes in version 2:
- added Rob's ACK.

Documentation/devicetree/bindings/arm/shmobile.txt |    2 ++
 Documentation/devicetree/bindings/arm/shmobile.txt |    2 ++
 1 file changed, 2 insertions(+)

Index: renesas/Documentation/devicetree/bindings/arm/shmobile.txt
===================================================================
--- renesas.orig/Documentation/devicetree/bindings/arm/shmobile.txt
+++ renesas/Documentation/devicetree/bindings/arm/shmobile.txt
@@ -39,6 +39,8 @@ Boards:
     compatible = "renesas,ape6evm", "renesas,r8a73a4"
   - Atmark Techno Armadillo-800 EVA
     compatible = "renesas,armadillo800eva"
+  - Blanche (RTP0RC7792SEB00010S)
+    compatible = "renesas,blanche", "renesas,r8a7792"
   - BOCK-W
     compatible = "renesas,bockw", "renesas,r8a7778"
   - Genmai (RTK772100BC00000BR)

[PATCH v3 11/12] ARM: dts: blanche: initial device tree

[Sergei Shtylyov]

Add the initial device  tree for the R8A7792 SoC based Blanche board.
The board has 2 debug serial ports: SCIF0 and SCIF3; include support for
them,  so that  the serial console  can  work.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

---
Changes in version 3:
- added Renesas Electronics' copyright.

Changes in version 2:
- added Simon's ACK and Geert's tag too.

 arch/arm/boot/dts/Makefile            |    1 
 arch/arm/boot/dts/r8a7792-blanche.dts |   45 ++++++++++++++++++++++++++++++++++
 2 files changed, 46 insertions(+)

Index: renesas/arch/arm/boot/dts/Makefile
===================================================================
--- renesas.orig/arch/arm/boot/dts/Makefile
+++ renesas/arch/arm/boot/dts/Makefile
@@ -638,6 +638,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
 	r8a7790-lager.dtb \
 	r8a7791-koelsch.dtb \
 	r8a7791-porter.dtb \
+	r8a7792-blanche.dtb \
 	r8a7793-gose.dtb \
 	r8a7794-alt.dtb \
 	r8a7794-silk.dtb \
Index: renesas/arch/arm/boot/dts/r8a7792-blanche.dts
===================================================================
--- /dev/null
+++ renesas/arch/arm/boot/dts/r8a7792-blanche.dts
@@ -0,0 +1,45 @@
+/*
+ * Device Tree Source for the Blanche board
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ * Copyright (C) 2016 Cogent  Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7792.dtsi"
+
+/ {
+	model = "Blanche";
+	compatible = "renesas,blanche", "renesas,r8a7792";
+
+	aliases {
+		serial0 = &scif0;
+		serial1 = &scif3;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&scif0 {
+	status = "okay";
+};
+
+&scif3 {
+	status = "okay";
+};

[PATCH v3 12/12] ARM: dts: blanche: add Ethernet support

[Sergei Shtylyov]

R8A7792  SoC  doesn't have the EtherMAC core, so SMSC  LAN89218  Ethernet
chip was used instead on the Blanche board; this chip  is compatible with
SMSC LAN9115  for  which there's a (device tree aware) driver. Describe
the  chip in  the  Blanche device tree;  enable DHCP and NFS root in the
kernel command line for the kernel booting.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>

---
Changes in version 3:
- refreshed the patch.

Changes in version 2:
- added Simon's ACK.

 arch/arm/boot/dts/r8a7792-blanche.dts |   23 ++++++++++++++++++++++-
 1 file changed, 22 insertions(+), 1 deletion(-)

Index: renesas/arch/arm/boot/dts/r8a7792-blanche.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7792-blanche.dts
+++ renesas/arch/arm/boot/dts/r8a7792-blanche.dts
@@ -22,7 +22,7 @@
 	};
 
 	chosen {
-		bootargs = "ignore_loglevel";
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
 		stdout-path = "serial0:115200n8";
 	};
 
@@ -30,6 +30,27 @@
 		device_type = "memory";
 		reg = <0 0x40000000 0 0x40000000>;
 	};
+
+	d3_3v: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "D3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	ethernet@18000000 {
+		compatible = "smsc,lan89218", "smsc,lan9115";
+		reg = <0 0x18000000 0 0x100>;
+		phy-mode = "mii";
+		interrupt-parent = <&irqc>;
+		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+		smsc,irq-push-pull;
+		reg-io-width = <4>;
+		vddvario-supply = <&d3_3v>;
+		vdd33a-supply = <&d3_3v>;
+	};
 };
 
 &extal_clk {

Re: [PATCH v3 01/12] ARM: shmobile: r8a7792: add clock index macros

[Geert Uytterhoeven]

On Wed, Jun 8, 2016 at 11:04 PM, Sergei Shtylyov
<sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org> wrote:
> Add macros usable by the device tree sources to reference the R8A7792
> clocks  by index.
>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>

Reviewed-by: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v3 06/12] ARM: dts: r8a7792: initial SoC device tree

[Geert Uytterhoeven]

Hi Sergei,

On Wed, Jun 8, 2016 at 11:17 PM, Sergei Shtylyov
<sergei.shtylyov@cogentembedded.com> wrote:
> The initial R8A7792 SoC device tree including CPU cores, GIC, timer, SYSC,
> and the required  clock descriptions.
>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>
> ---
> Changes in version 3:

Thanks for the update!

> --- /dev/null
> +++ renesas/arch/arm/boot/dts/r8a7792.dtsi
> @@ -0,0 +1,180 @@
> +/*
> + * Device Tree Source for the r8a7792 SoC
> + *
> + * Copyright (C) 2016 Cogent Embedded Inc.
> + *
> + * This file is licensed under the terms of the GNU General Public License
> + * version 2.  This program is licensed "as is" without any warranty of any
> + * kind, whether express or implied.
> + */
> +
> +#include <dt-bindings/clock/r8a7792-clock.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/power/r8a7792-sysc.h>
> +
> +/ {
> +       compatible = "renesas,r8a7792";
> +       #address-cells = <2>;
> +       #size-cells = <2>;
> +
> +       cpus {
> +               #address-cells = <1>;
> +               #size-cells = <0>;

This is gonna need

                enable-method = "renesas,apmu";

soon.

> +       soc {

> +               p_clk: p {
> +               compatible = "fixed-factor-clock";

Missing TAB.

> +                       clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
> +                       #clock-cells = <0>;
> +                       clock-div = <24>;
> +                       clock-mult = <1>;
> +               };
> +               cp_clk: cp {
> +                       compatible = "fixed-factor-clock";
> +                       clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
> +                       #clock-cells = <0>;
> +                       clock-div = <3>;

48

(did you check /sys/kernel/debug/clk/clk_summary matches Table 7.2c?)

> +                       clock-mult = <1>;
> +               };
> +
> +               /* Gate clocks */

> +               mstp7_clks: mstp7_clks@e615014c {
> +                       compatible = "renesas,r8a7792-mstp-clocks",
> +                                    "renesas,cpg-mstp-clocks";
> +                       reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
> +                       clocks = <&zs_clk>, <&zs_clk>, <&p_clk>, <&p_clk>,
> +                                <&p_clk>, <&p_clk>;
> +                       #clock-cells = <1>;
> +                       clock-indices = <
> +                               R8A7792_CLK_HSCIF1 R8A7792_CLK_HSCIF0
> +                               R8A7792_CLK_SCIF3 R8A7792_CLK_SCIF2
> +                               R8A7792_CLK_SCIF1 R8A7792_CLK_SCIF0
> +                       >;
> +                       clock-output-names = "hscif1", "hscif0", "scif3",
> +                                            "scif2", "scif1", "scif0",
> +                                            "du1", "du0";

You forgot to drop "du1" and "du0".

> +               };

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH v3 06/12] ARM: dts: r8a7792: initial SoC device tree

[Sergei Shtylyov]

On 06/09/2016 01:05 PM, Geert Uytterhoeven wrote:

>> The initial R8A7792 SoC device tree including CPU cores, GIC, timer, SYSC,
>> and the required  clock descriptions.
>>
>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>>
>> ---
>> Changes in version 3:
>
> Thanks for the update!
>
>> --- /dev/null
>> +++ renesas/arch/arm/boot/dts/r8a7792.dtsi
>> @@ -0,0 +1,180 @@
>> +/*
>> + * Device Tree Source for the r8a7792 SoC
>> + *
>> + * Copyright (C) 2016 Cogent Embedded Inc.
>> + *
>> + * This file is licensed under the terms of the GNU General Public License
>> + * version 2.  This program is licensed "as is" without any warranty of any
>> + * kind, whether express or implied.
>> + */
>> +
>> +#include <dt-bindings/clock/r8a7792-clock.h>
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include <dt-bindings/power/r8a7792-sysc.h>
>> +
>> +/ {
>> +       compatible = "renesas,r8a7792";
>> +       #address-cells = <2>;
>> +       #size-cells = <2>;
>> +
>> +       cpus {
>> +               #address-cells = <1>;
>> +               #size-cells = <0>;
>
> This is gonna need
>
>                 enable-method = "renesas,apmu";
>
> soon.

    When Magnus' patchset lands, we'll see...

>> +       soc {
>
>> +               p_clk: p {
>> +               compatible = "fixed-factor-clock";
>
> Missing TAB.

    Argh!

>> +                       clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
>> +                       #clock-cells = <0>;
>> +                       clock-div = <24>;
>> +                       clock-mult = <1>;
>> +               };
>> +               cp_clk: cp {
>> +                       compatible = "fixed-factor-clock";
>> +                       clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
>> +                       #clock-cells = <0>;
>> +                       clock-div = <3>;
>
> 48

    Thank you.

>
> (did you check /sys/kernel/debug/clk/clk_summary matches Table 7.2c?)

    Now I have! Only the Z clock seem to be out of range -- 1.5 GHz vs 1 GHz max.

>> +                       clock-mult = <1>;
>> +               };
>> +
>> +               /* Gate clocks */
>
>> +               mstp7_clks: mstp7_clks@e615014c {
>> +                       compatible = "renesas,r8a7792-mstp-clocks",
>> +                                    "renesas,cpg-mstp-clocks";
>> +                       reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
>> +                       clocks = <&zs_clk>, <&zs_clk>, <&p_clk>, <&p_clk>,
>> +                                <&p_clk>, <&p_clk>;
>> +                       #clock-cells = <1>;
>> +                       clock-indices = <
>> +                               R8A7792_CLK_HSCIF1 R8A7792_CLK_HSCIF0
>> +                               R8A7792_CLK_SCIF3 R8A7792_CLK_SCIF2
>> +                               R8A7792_CLK_SCIF1 R8A7792_CLK_SCIF0
>> +                       >;
>> +                       clock-output-names = "hscif1", "hscif0", "scif3",
>> +                                            "scif2", "scif1", "scif0",
>> +                                            "du1", "du0";
>
> You forgot to drop "du1" and "du0".

    Argh again...

>> +               };
>
> Gr{oetje,eeting}s,
>
>                         Geert

MBR, Sergei