From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sudeep Holla Subject: Re: [PATCH v5 6/8] Documentation: bindings: add compatible specific to legacy SCPI protocol Date: Tue, 8 Nov 2016 14:32:11 +0000 Message-ID: <7870a99c-c0a7-a39e-62c9-de1139d03846@arm.com> References: <1478148731-11712-1-git-send-email-sudeep.holla@arm.com> <1478148731-11712-7-git-send-email-sudeep.holla@arm.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; Format="flowed" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1478148731-11712-7-git-send-email-sudeep.holla@arm.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Rob Herring Cc: devicetree@vger.kernel.org, Neil Armstrong , linux-kernel@vger.kernel.org, Sudeep Holla , Olof Johansson , linux-amlogic@lists.infradead.org, linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org Hi Rob, On 03/11/16 04:52, Sudeep Holla wrote: > This patch adds specific compatible to support legacy SCPI protocol. > Sorry for messing it up before, I think this version is much better. Only this patch introduces new compatible, while 5,7,8/8 are just reorganization to move the platform specific stuff out of the generic SCPI bindings. It would be good if you can have a quick look and provide ack if you are happy with these patches. -- Regards, Sudeep > Cc: Rob Herring > Signed-off-by: Sudeep Holla > --- > Documentation/devicetree/bindings/arm/arm,scpi.txt | 4 +++- > 1 file changed, 3 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/arm/arm,scpi.txt b/Documentation/devicetree/bindings/arm/arm,scpi.txt > index d1882c4540d0..ebd03fc93135 100644 > --- a/Documentation/devicetree/bindings/arm/arm,scpi.txt > +++ b/Documentation/devicetree/bindings/arm/arm,scpi.txt > @@ -7,7 +7,9 @@ by Linux to initiate various system control and power operations. > > Required properties: > > -- compatible : should be "arm,scpi" > +- compatible : should be > + * "arm,scpi" : For implementations complying to SCPI v1.0 or above > + * "arm,legacy-scpi" : For implementations complying pre SCPI v1.0 > - mboxes: List of phandle and mailbox channel specifiers > All the channels reserved by remote SCP firmware for use by > SCPI message protocol should be specified in any order >