From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bartlomiej Zolnierkiewicz Subject: Re: [PATCH 1/2 v3 resend] video: fbdev: imxfb: support AUS mode Date: Fri, 21 Apr 2017 11:33:13 +0200 Message-ID: <7991281.N2SBFgRzh8@amdc3058> References: <1488193030-13064-1-git-send-email-martin@kaiser.cx> <1492760753-8374-1-git-send-email-martin@kaiser.cx> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7Bit Return-path: In-reply-to: <1492760753-8374-1-git-send-email-martin-XxZfDwE/svGeZLLa646FqQ@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Martin Kaiser Cc: linux-fbdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Sascha Hauer , linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Rob Herring , Mark Rutland , devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org Hi, On Friday, April 21, 2017 09:45:52 AM Martin Kaiser wrote: > Some displays require setting AUS mode in the LDCD AUS Mode Control > Register to work with the imxfb driver. Like the value of the Panel > Configuration Register, the AUS mode setting depends on the display > mode. > > Allow setting AUS mode from the device tree by adding a boolean > property. Make this property optional to keep the DT ABI stable. > AUS mode can be set only on imx21 and compatible chipsets. > > Signed-off-by: Martin Kaiser > --- > re-sending v3, rebased against current linux-next > it seems this got lost along the way, there was a bit of confusion > whether to split this in two patches or not It hadn't been lost, I've been waiting on v4, please see: https://lkml.org/lkml/2017/3/15/709 [ Rob has requested rename of the property to "fsl,aus-mode". ] Best regards, -- Bartlomiej Zolnierkiewicz Samsung R&D Institute Poland Samsung Electronics -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html