Re: [PATCH 2/4] ARM: dts: omap: omap4-epson-embt2ws: wire up regulators

[Roger Quadros <rogerq@kernel.org>]

On 01/10/2024 00:30, Andreas Kemnade wrote:
> Wire up the regulators where usage is plausible. Do not
> wire them if purpose/usage is unclear like 5V for
> many things requiring lower voltages.
> 
> Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
> ---
>  arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts | 11 ++++-------
>  1 file changed, 4 insertions(+), 7 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts b/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts
> index d6b0abba19f6..cc1b6080bf95 100644
> --- a/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts
> +++ b/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts
> @@ -20,13 +20,13 @@ memory@80000000 {
>  	backlight-left {
>  		compatible = "pwm-backlight";
>  		pwms = <&twl_pwm 1 7812500>;
> -		power-supply = <&unknown_supply>;
> +		power-supply = <&lb_v50>;

This is probably wrong. I noticed this while reviewing patch 3.

you probably want to wire this to blc_l?

>  	};
>  
>  	backlight-right {
>  		compatible = "pwm-backlight";
>  		pwms = <&twl_pwm 0 7812500>;
> -		power-supply = <&unknown_supply>;
> +		power-supply = <&lb_v50>;

this one should be wired to blc_r?

>  	};
>  
>  	cb_v18: cb-v18 {
> @@ -95,11 +95,6 @@ lb_v50: lb-v50 {
>  		enable-active-high;
>  	};
>  
> -	unknown_supply: unknown-supply {
> -		compatible = "regulator-fixed";
> -		regulator-name = "unknown";
> -	};
> -
>  	wl12xx_pwrseq: wl12xx-pwrseq {
>  		compatible = "mmc-pwrseq-simple";
>  		clocks = <&twl 1>;
> @@ -308,6 +303,8 @@ mpu9150: imu@68 {
>  		pinctrl-0 = <&mpu9150_pins>;
>  		interrupt-parent = <&gpio2>;
>  		interrupt = <7 IRQ_TYPE_LEVEL_HIGH>;
> +		vddio-supply = <&cb_v18>;
> +		vdd-supply = <&cb_v33>;
>  		invensense,level-shifter;
>  	};
>  };

-- 
cheers,
-roger