From: Krzysztof Kozlowski <krzk@kernel.org>
To: Vicentiu Galanopulo <vicentiu.galanopulo@remote-tech.co.uk>,
pavel@ucw.cz, lee@kernel.org, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org,
linux-leds@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 1/2] dt-bindings: leds: Add LED1202 LED Controller
Date: Mon, 24 Jun 2024 07:02:12 +0200 [thread overview]
Message-ID: <7a080980-a247-4d17-88f7-19899379e1a1@kernel.org> (raw)
In-Reply-To: <ZniNdGgKyUMV-hjq@admins-Air>
On 23/06/2024 23:02, Vicentiu Galanopulo wrote:
> The LED1202 is a 12-channel low quiescent current LED driver with:
> * Supply range from 2.6 V to 5 V
> * 20 mA current capability per channel
> * 1.8 V compatible I2C control interface
> * 8-bit analog dimming individual control
> * 12-bit local PWM resolution
> * 8 programmable patterns
>
> Signed-off-by: Vicentiu Galanopulo <vicentiu.galanopulo@remote-tech.co.uk>
> ---
>
> Changes in v2:
> - renamed label to remove color from it
> - add color property for each node
> - add function and function-enumerator property for each node
Fix your email setup, because your broken or non-existing threading
messes with review process. See:
b4 diff '<ZniNdGgKyUMV-hjq@admins-Air>'
Grabbing thread from
lore.kernel.org/all/ZniNdGgKyUMV-hjq@admins-Air/t.mbox.gz
Checking for older revisions
Grabbing search results from lore.kernel.org
Added from v1: 1 patches
---
Analyzing 3 messages in the thread
Looking for additional code-review trailers on lore.kernel.org
Preparing fake-am for v1: dt-bindings: leds: Add LED1202 LED Controller
ERROR: v1 series incomplete; unable to create a fake-am range
---
Could not create fake-am range for lower series v1
>
> .../devicetree/bindings/leds/st,led1202.yml | 162 ++++++++++++++++++
> 1 file changed, 162 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/leds/st,led1202.yml
yaml, not yml
>
> diff --git a/Documentation/devicetree/bindings/leds/st,led1202.yml b/Documentation/devicetree/bindings/leds/st,led1202.yml
> new file mode 100644
> index 000000000000..1484b09c8eeb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/st,led1202.yml
> @@ -0,0 +1,162 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds/st,led1202.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ST LED1202 LED controllers
> +
> +maintainers:
> + - Vicentiu Galanopulo <vicentiu.galanopulo@remote-tech.co.uk>
> +
> +description:
> + The LED1202 is a 12-channel low quiescent current LED controller
> + programmable via I2C; The output current can be adjusted separately
> + for each channel by 8-bit analog and 12-bit digital dimming control.
> +
> + Datasheet available at
> + https://www.st.com/en/power-management/led1202.html
> +
> +properties:
> + compatible:
> + enum:
> + - st,led1202
> +
> + reg:
> + maxItems: 1
> +
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 0
> +
> +patternProperties:
> + "^led@[0-9a-f]+$":
> + type: object
> + $ref: common.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + reg:
> + minimum: 0
> + maximum: 11
> +
> + required:
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/leds/common.h>
> +
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + led-controller@58 {
> + compatible = "st,led1202";
> + reg = <0x58>;
> + address-cells = <1>;
> + size-cells = <0>;
> +
> + led@0 {
> + reg = <0>;
> + label = "led1";
> + function = LED_FUNCTION_STATUS;
> + color = <LED_COLOR_ID_RED>;
> + function-enumerator = <1>;
> + active = <1>;
This did not improve. First, which binding defines this field?
Second this was never tested.
Third, where did you give me any chance to reply to your comment before
posting new version?
Best regards,
Krzysztof
next prev parent reply other threads:[~2024-06-24 5:02 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-23 21:02 [PATCH v2 1/2] dt-bindings: leds: Add LED1202 LED Controller Vicentiu Galanopulo
2024-06-24 5:02 ` Krzysztof Kozlowski [this message]
2024-06-24 13:06 ` Vicentiu Galanopulo
2024-06-24 13:08 ` Krzysztof Kozlowski
2024-06-24 13:44 ` Vicentiu Galanopulo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7a080980-a247-4d17-88f7-19899379e1a1@kernel.org \
--to=krzk@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lee@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=pavel@ucw.cz \
--cc=robh@kernel.org \
--cc=vicentiu.galanopulo@remote-tech.co.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).