From mboxrd@z Thu Jan 1 00:00:00 1970 From: Amit Kucheria Subject: [PATCH v2 07/13] arm64: dts: msm8998: thermal: GPU has two sensors, add the second Date: Fri, 29 Mar 2019 15:42:13 +0530 Message-ID: <7af19b6468b6e10f0a24c40b7a467a71ae9bee65.1553853990.git.amit.kucheria@linaro.org> References: Return-path: In-Reply-To: In-Reply-To: References: Sender: linux-kernel-owner@vger.kernel.org To: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, bjorn.andersson@linaro.org, edubezval@gmail.com, andy.gross@linaro.org, David Brown Cc: devicetree@vger.kernel.org List-Id: devicetree@vger.kernel.org The first sensor is on top and the second sensor below the GPU Signed-off-by: Amit Kucheria --- arch/arm64/boot/dts/qcom/msm8998.dtsi | 25 ++++++++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 56ca9ecdb0bf..b368da235663 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -506,11 +506,34 @@ }; }; - gpu-thermal { + gpu-thermal-bottom { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 12>; + + trips { + gpu1_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + gpu-thermal-top { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsens0 13>; + + trips { + gpu2_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; }; }; -- 2.17.1