From mboxrd@z Thu Jan 1 00:00:00 1970 From: Florian Fainelli Subject: Re: [PATCH 0/9] AHCI and SATA PHY support for BCM63138 Date: Thu, 20 Sep 2018 12:19:41 -0700 Message-ID: <7b6e1671-8efe-20d2-d3a2-51a521ce7f22@gmail.com> References: <20180920191646.18198-1-f.fainelli@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20180920191646.18198-1-f.fainelli@gmail.com> Content-Language: en-US Sender: linux-kernel-owner@vger.kernel.org To: Florian Fainelli , linux-kernel@vger.kernel.org Cc: Jens Axboe , Rob Herring , Mark Rutland , Kishon Vijay Abraham I , Al Cooper , Ray Jui , Tejun Heo , Fengguang Wu , Arnd Bergmann , "open list:LIBATA SUBSYSTEM (Serial and Parallel ATA drivers)" , "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" , bcm-kernel-feedback-list@broadcom.com List-Id: devicetree@vger.kernel.org On 09/20/2018 12:16 PM, Florian Fainelli wrote: > Hi Kishon, Tejun, > > This patch series adds support for the SATA AHCI and PHY found on the > ARM-basd BCM63138 DSL SoCs. > > It would probably make sense for patches 1-3 to go through Kishon's > tree, patches 4-7 through Tejun's tree, and I would be merging the last > two patches through the Broadcom ARM-SoC tree. > > Let me know if this is not a workable plan, thank you very much! Looks like I had left patches with the incorrect subject, please disregard the following patches: [PATCH 2/9] phy: broadcom: allow PHY_BRCM_SATA driver to be built for DSL SoCs [PATCH 5/9] ata: sata_brcmstb: Allow optional reset controller to be used [PATCH 6/9] ata: ahci_brcmstb: Match 63138 compatible strings since they have incorrect/inconsistent titles, the other patches are fine though. Sorry about that. > > Florian Fainelli (9): > dt-bindings: phy: Document BCM63138 compatible string > phy: brcm-sata: allow PHY_BRCM_SATA driver to be built for DSL SoCs > phy: brcm-sata: Add BCM63138 (DSL) PHY init sequence > dt-bindings: ata: Document BCM63138 compatible string > ata: ahci_brcm: Allow optional reset controller to be used > ata: ahci_brcm: Match BCM63138 compatible strings > ata: ahci_brcm: Allow using driver or DSL SoCs > ARM: dts: BCM63xx: enable SATA PHY and AHCI controller > ARM: bcm63138: Enable SATA AHCI and PHY > > .../bindings/ata/brcm,sata-brcm.txt | 1 + > .../devicetree/bindings/phy/brcm-sata-phy.txt | 1 + > arch/arm/boot/dts/bcm63138.dtsi | 30 ++++++++ > arch/arm/boot/dts/bcm963138dvt.dts | 8 +++ > drivers/ata/Kconfig | 3 +- > drivers/ata/ahci_brcm.c | 10 +++ > drivers/phy/broadcom/Kconfig | 3 +- > drivers/phy/broadcom/phy-brcm-sata.c | 70 +++++++++++++++++++ > 8 files changed, 124 insertions(+), 2 deletions(-) > -- Florian