[PATCH v3 0/4] arm64: dts: qcom: enable sa8540p-ride rtc

[PATCH v3 0/4] arm64: dts: qcom: enable sa8540p-ride rtc

[Eric Chanudet]

Enable sa8540p-ride rtc on pmic@0.

sa8540p base boards share the same pmics description, currently in
pm8450a.dtsi. Rename the file to make this explicit and use it in both
sa8540p-ride.dts and sa8295p-adp.dts.
Add the missing offset where appropriate for the alarm register bank in
other qcom,pm8941-rtc description.

Changes since v2:
- rename pm8450a.dtsi to sa8540p-pmics.dtsi.

Changes since v1:
- Add "alarm" register bank offset at 0x6100 in qcom,pm8941-rtc
  descriptions.

Eric Chanudet (4):
  arm64: dts: qcom: rename pm8450a dtsi to sa8540p-pmics
  arm64: dts: qcom: sa8450p-pmics: add rtc node
  arm64: dts: qcom: sa8295p-adp: use sa8540p-pmics
  arm64: dts: qcom: pm8941-rtc add alarm register

 arch/arm64/boot/dts/qcom/pm8150.dtsi          |  2 +-
 arch/arm64/boot/dts/qcom/pm8916.dtsi          |  3 +-
 arch/arm64/boot/dts/qcom/pm8950.dtsi          |  2 +-
 arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi     |  2 +-
 arch/arm64/boot/dts/qcom/pmp8074.dtsi         |  2 +-
 arch/arm64/boot/dts/qcom/pms405.dtsi          |  2 +-
 arch/arm64/boot/dts/qcom/sa8295p-adp.dts      | 79 +------------------
 .../qcom/{pm8450a.dtsi => sa8540p-pmics.dtsi} |  8 ++
 arch/arm64/boot/dts/qcom/sa8540p-ride.dts     |  2 +-
 9 files changed, 17 insertions(+), 85 deletions(-)
 rename arch/arm64/boot/dts/qcom/{pm8450a.dtsi => sa8540p-pmics.dtsi} (90%)

-- 
2.38.1

[PATCH v3 1/4] arm64: dts: qcom: rename pm8450a dtsi to sa8540p-pmics

[Eric Chanudet]

pm8450a.dtsi was introduced for the descriptions of sa8540p based boards.
Rename the dtsi to make this relationship explicit.

Signed-off-by: Eric Chanudet <echanude@redhat.com>
---
 arch/arm64/boot/dts/qcom/{pm8450a.dtsi => sa8540p-pmics.dtsi} | 0
 arch/arm64/boot/dts/qcom/sa8540p-ride.dts                     | 2 +-
 2 files changed, 1 insertion(+), 1 deletion(-)
 rename arch/arm64/boot/dts/qcom/{pm8450a.dtsi => sa8540p-pmics.dtsi} (100%)

diff --git a/arch/arm64/boot/dts/qcom/pm8450a.dtsi b/arch/arm64/boot/dts/qcom/sa8540p-pmics.dtsi
similarity index 100%
rename from arch/arm64/boot/dts/qcom/pm8450a.dtsi
rename to arch/arm64/boot/dts/qcom/sa8540p-pmics.dtsi
diff --git a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
index 6c547f1b13dc..77d499702ea8 100644
--- a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
@@ -10,7 +10,7 @@
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 
 #include "sa8540p.dtsi"
-#include "pm8450a.dtsi"
+#include "sa8540p-pmics.dtsi"
 
 / {
 	model = "Qualcomm SA8540P Ride";
-- 
2.38.1

Re: [PATCH v3 1/4] arm64: dts: qcom: rename pm8450a dtsi to sa8540p-pmics

[Konrad Dybcio]

On 17.12.2022 00:26, Eric Chanudet wrote:
> pm8450a.dtsi was introduced for the descriptions of sa8540p based boards.
> Rename the dtsi to make this relationship explicit.
> 
For the descriptions of PMICs used on SA8540p based boards, I suppose?
> Signed-off-by: Eric Chanudet <echanude@redhat.com>
> ---
The change itself looks perfectly fine though!

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  arch/arm64/boot/dts/qcom/{pm8450a.dtsi => sa8540p-pmics.dtsi} | 0
>  arch/arm64/boot/dts/qcom/sa8540p-ride.dts                     | 2 +-
>  2 files changed, 1 insertion(+), 1 deletion(-)
>  rename arch/arm64/boot/dts/qcom/{pm8450a.dtsi => sa8540p-pmics.dtsi} (100%)
> 
> diff --git a/arch/arm64/boot/dts/qcom/pm8450a.dtsi b/arch/arm64/boot/dts/qcom/sa8540p-pmics.dtsi
> similarity index 100%
> rename from arch/arm64/boot/dts/qcom/pm8450a.dtsi
> rename to arch/arm64/boot/dts/qcom/sa8540p-pmics.dtsi
> diff --git a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
> index 6c547f1b13dc..77d499702ea8 100644
> --- a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
> +++ b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
> @@ -10,7 +10,7 @@
>  #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
>  
>  #include "sa8540p.dtsi"
> -#include "pm8450a.dtsi"
> +#include "sa8540p-pmics.dtsi"
>  
>  / {
>  	model = "Qualcomm SA8540P Ride";

Re: [PATCH v3 1/4] arm64: dts: qcom: rename pm8450a dtsi to sa8540p-pmics

[Eric Chanudet]

On Sat, Dec 17, 2022 at 03:36:58PM +0100, Konrad Dybcio wrote:
> On 17.12.2022 00:26, Eric Chanudet wrote:
> > pm8450a.dtsi was introduced for the descriptions of sa8540p based boards.
> > Rename the dtsi to make this relationship explicit.
> > 
> For the descriptions of PMICs used on SA8540p based boards, I suppose?

Absolutely, thanks! Amended in v4:
https://lore.kernel.org/linux-arm-msm/20221219191000.2570545-1-echanude@redhat.com

-- 
Eric Chanudet

[PATCH v3 2/4] arm64: dts: qcom: sa8450p-pmics: add rtc node

[Eric Chanudet]

Add the rtc block on the first pmic to enable the rtc for
sa8540p-ride.

Signed-off-by: Eric Chanudet <echanude@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sa8540p-pmics.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sa8540p-pmics.dtsi b/arch/arm64/boot/dts/qcom/sa8540p-pmics.dtsi
index 34fc72896761..c9b8da43b237 100644
--- a/arch/arm64/boot/dts/qcom/sa8540p-pmics.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8540p-pmics.dtsi
@@ -13,6 +13,14 @@ pm8450a: pmic@0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
+			wakeup-source;
+		};
+
 		pm8450a_gpios: gpio@c000 {
 			compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
-- 
2.38.1

[PATCH v3 3/4] arm64: dts: qcom: sa8295p-adp: use sa8540p-pmics

[Eric Chanudet]

Include the dtsi to use a single pmic descriptions.
Both sa8295p-adp and sa8540p-adp have the same spmi pmic apparently.

Signed-off-by: Eric Chanudet <echanude@redhat.com>
---
 arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 79 +-----------------------
 1 file changed, 1 insertion(+), 78 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
index 84cb6f3eeb56..c8437efe8235 100644
--- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
@@ -11,6 +11,7 @@
 #include <dt-bindings/spmi/spmi.h>
 
 #include "sa8540p.dtsi"
+#include "sa8540p-pmics.dtsi"
 
 / {
 	model = "Qualcomm SA8295P ADP";
@@ -260,84 +261,6 @@ &remoteproc_nsp1 {
 	status = "okay";
 };
 
-&spmi_bus {
-	pm8450a: pmic@0 {
-		compatible = "qcom,pm8150", "qcom,spmi-pmic";
-		reg = <0x0 SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rtc@6000 {
-			compatible = "qcom,pm8941-rtc";
-			reg = <0x6000>;
-			reg-names = "rtc", "alarm";
-			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
-			wakeup-source;
-		};
-
-		pm8450a_gpios: gpio@c000 {
-			compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
-			reg = <0xc000>;
-			gpio-controller;
-			gpio-ranges = <&pm8450a_gpios 0 0 10>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-
-	pm8450c: pmic@4 {
-		compatible = "qcom,pm8150", "qcom,spmi-pmic";
-		reg = <0x4 SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pm8450c_gpios: gpio@c000 {
-			compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
-			reg = <0xc000>;
-			gpio-controller;
-			gpio-ranges = <&pm8450c_gpios 0 0 10>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-
-	pm8450e: pmic@8 {
-		compatible = "qcom,pm8150", "qcom,spmi-pmic";
-		reg = <0x8 SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pm8450e_gpios: gpio@c000 {
-			compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
-			reg = <0xc000>;
-			gpio-controller;
-			gpio-ranges = <&pm8450e_gpios 0 0 10>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-
-	pm8450g: pmic@c {
-		compatible = "qcom,pm8150", "qcom,spmi-pmic";
-		reg = <0xc SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pm8450g_gpios: gpio@c000 {
-			compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
-			reg = <0xc000>;
-			gpio-controller;
-			gpio-ranges = <&pm8450g_gpios 0 0 10>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-};
-
 &ufs_mem_hc {
 	reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>;
 
-- 
2.38.1

Re: [PATCH v3 3/4] arm64: dts: qcom: sa8295p-adp: use sa8540p-pmics

[Konrad Dybcio]

On 17.12.2022 00:26, Eric Chanudet wrote:
> Include the dtsi to use a single pmic descriptions.
> Both sa8295p-adp and sa8540p-adp have the same spmi pmic apparently.
> 
> Signed-off-by: Eric Chanudet <echanude@redhat.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 79 +-----------------------
>  1 file changed, 1 insertion(+), 78 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
> index 84cb6f3eeb56..c8437efe8235 100644
> --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
> +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
> @@ -11,6 +11,7 @@
>  #include <dt-bindings/spmi/spmi.h>
>  
>  #include "sa8540p.dtsi"
> +#include "sa8540p-pmics.dtsi"
>  
>  / {
>  	model = "Qualcomm SA8295P ADP";
> @@ -260,84 +261,6 @@ &remoteproc_nsp1 {
>  	status = "okay";
>  };
>  
> -&spmi_bus {
> -	pm8450a: pmic@0 {
> -		compatible = "qcom,pm8150", "qcom,spmi-pmic";
> -		reg = <0x0 SPMI_USID>;
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -
> -		rtc@6000 {
> -			compatible = "qcom,pm8941-rtc";
> -			reg = <0x6000>;
> -			reg-names = "rtc", "alarm";
> -			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
> -			wakeup-source;
> -		};
> -
> -		pm8450a_gpios: gpio@c000 {
> -			compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
> -			reg = <0xc000>;
> -			gpio-controller;
> -			gpio-ranges = <&pm8450a_gpios 0 0 10>;
> -			#gpio-cells = <2>;
> -			interrupt-controller;
> -			#interrupt-cells = <2>;
> -		};
> -	};
> -
> -	pm8450c: pmic@4 {
> -		compatible = "qcom,pm8150", "qcom,spmi-pmic";
> -		reg = <0x4 SPMI_USID>;
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -
> -		pm8450c_gpios: gpio@c000 {
> -			compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
> -			reg = <0xc000>;
> -			gpio-controller;
> -			gpio-ranges = <&pm8450c_gpios 0 0 10>;
> -			#gpio-cells = <2>;
> -			interrupt-controller;
> -			#interrupt-cells = <2>;
> -		};
> -	};
> -
> -	pm8450e: pmic@8 {
> -		compatible = "qcom,pm8150", "qcom,spmi-pmic";
> -		reg = <0x8 SPMI_USID>;
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -
> -		pm8450e_gpios: gpio@c000 {
> -			compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
> -			reg = <0xc000>;
> -			gpio-controller;
> -			gpio-ranges = <&pm8450e_gpios 0 0 10>;
> -			#gpio-cells = <2>;
> -			interrupt-controller;
> -			#interrupt-cells = <2>;
> -		};
> -	};
> -
> -	pm8450g: pmic@c {
> -		compatible = "qcom,pm8150", "qcom,spmi-pmic";
> -		reg = <0xc SPMI_USID>;
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -
> -		pm8450g_gpios: gpio@c000 {
> -			compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
> -			reg = <0xc000>;
> -			gpio-controller;
> -			gpio-ranges = <&pm8450g_gpios 0 0 10>;
> -			#gpio-cells = <2>;
> -			interrupt-controller;
> -			#interrupt-cells = <2>;
> -		};
> -	};
> -};
> -
>  &ufs_mem_hc {
>  	reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>;
>  

[PATCH v3 4/4] arm64: dts: qcom: pm8941-rtc add alarm register

[Eric Chanudet]

A few descriptions including a qcom,pm8941-rtc describe two reg-names
for the "rtc" and "alarm" register banks, but only one offset. For
consistency with reg-names, add the "alarm" register offset. No
functional change is expected from this.

Signed-off-by: Eric Chanudet <echanude@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/pm8150.dtsi      | 2 +-
 arch/arm64/boot/dts/qcom/pm8916.dtsi      | 3 ++-
 arch/arm64/boot/dts/qcom/pm8950.dtsi      | 2 +-
 arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi | 2 +-
 arch/arm64/boot/dts/qcom/pmp8074.dtsi     | 2 +-
 arch/arm64/boot/dts/qcom/pms405.dtsi      | 2 +-
 6 files changed, 7 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi
index 574fa95a2871..db90c55fa2cf 100644
--- a/arch/arm64/boot/dts/qcom/pm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi
@@ -121,7 +121,7 @@ pm8150_adc_tm: adc-tm@3500 {
 
 		rtc@6000 {
 			compatible = "qcom,pm8941-rtc";
-			reg = <0x6000>;
+			reg = <0x6000>, <0x6100>;
 			reg-names = "rtc", "alarm";
 			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
 		};
diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi
index 08f9ca006e72..e2a6b66d8847 100644
--- a/arch/arm64/boot/dts/qcom/pm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi
@@ -93,7 +93,8 @@ adc-chan@f {
 
 		rtc@6000 {
 			compatible = "qcom,pm8941-rtc";
-			reg = <0x6000>;
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
 			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/pm8950.dtsi b/arch/arm64/boot/dts/qcom/pm8950.dtsi
index 07c3896bd36f..d7df4ad60509 100644
--- a/arch/arm64/boot/dts/qcom/pm8950.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8950.dtsi
@@ -126,7 +126,7 @@ xo-therm-buf@3c {
 
 		rtc@6000 {
 			compatible = "qcom,pm8941-rtc";
-			reg = <0x6000>;
+			reg = <0x6000>, <0x6100>;
 			reg-names = "rtc", "alarm";
 			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
 		};
diff --git a/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi b/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi
index 20c5d60c8c2c..ee1e428d3a6e 100644
--- a/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi
@@ -108,7 +108,7 @@ pmm8155au_1_adc_tm: adc-tm@3500 {
 
 		pmm8155au_1_rtc: rtc@6000 {
 			compatible = "qcom,pm8941-rtc";
-			reg = <0x6000>;
+			reg = <0x6000>, <0x6100>;
 			reg-names = "rtc", "alarm";
 			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
 
diff --git a/arch/arm64/boot/dts/qcom/pmp8074.dtsi b/arch/arm64/boot/dts/qcom/pmp8074.dtsi
index ceb2e6358b3d..580684411d74 100644
--- a/arch/arm64/boot/dts/qcom/pmp8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmp8074.dtsi
@@ -74,7 +74,7 @@ vph-pwr@131 {
 
 		pmp8074_rtc: rtc@6000 {
 			compatible = "qcom,pm8941-rtc";
-			reg = <0x6000>;
+			reg = <0x6000>, <0x6100>;
 			reg-names = "rtc", "alarm";
 			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
 			allow-set-time;
diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi
index ffe9e33808d0..22edb47c6a84 100644
--- a/arch/arm64/boot/dts/qcom/pms405.dtsi
+++ b/arch/arm64/boot/dts/qcom/pms405.dtsi
@@ -125,7 +125,7 @@ xo_therm: xo_temp@76 {
 
 		rtc@6000 {
 			compatible = "qcom,pm8941-rtc";
-			reg = <0x6000>;
+			reg = <0x6000>, <0x6100>;
 			reg-names = "rtc", "alarm";
 			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
 		};
-- 
2.38.1