Re: [PATCH v14 05/10] drm/mediatek: Add MT8195 Embedded DisplayPort driver

[CK Hu <ck.hu@mediatek.com>]

Hi, Bo-Chen:

On Thu, 2022-07-14 at 16:24 +0800, Rex-BC Chen wrote:
> On Wed, 2022-07-13 at 16:10 +0800, CK Hu wrote:
> > Hi, Bo-Chen:
> > 
> > On Tue, 2022-07-12 at 19:12 +0800, Bo-Chen Chen wrote:
> > > From: Markus Schneider-Pargmann <msp@baylibre.com>
> > > 
> > > This patch adds a embedded displayport driver for the MediaTek
> > > mt8195
> > > SoC.
> > > 
> > > It supports the MT8195, the embedded DisplayPort units. It offers
> > > DisplayPort 1.4 with up to 4 lanes.
> > > 
> > > The driver creates a child device for the phy. The child device
> > > will
> > > never exist without the parent being active. As they are sharing
> > > a
> > > register range, the parent passes a regmap pointer to the child
> > > so
> > > that
> > > both can work with the same register range. The phy driver sets
> > > device
> > > data that is read by the parent to get the phy device that can be
> > > used
> > > to control the phy properties.
> > > 
> > > This driver is based on an initial version by
> > > Jitao shi <jitao.shi@mediatek.com>
> > > 
> > > Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
> > > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
> > > Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
> > > ---
> > 
> > [snip]
> > 
> > > +
> > > +struct mtk_dp_timings {
> > > +	struct videomode vm;
> > > +};
> > > +
> > > +struct mtk_dp_irq_sta {
> > > +	bool hpd_inerrupt;
> > > +};
> > > +
> > > +struct mtk_dp_train_info {
> > > +	bool tps3;
> > > +	bool tps4;
> > > +	bool sink_ssc;
> > > +	bool cable_plugged_in;
> > > +	bool cable_state_change;
> > > +	bool cr_done;
> > > +	bool eq_done;
> > > +	/* link_rate is in multiple of 0.27Gbps */
> > > +	int link_rate;
> > > +	int lane_count;
> > > +	struct mtk_dp_irq_sta irq_sta;
> > 
> > There is only one member in struct mtk_dp_irq_sta, so drop struct
> > mtk_dp_irq_sta and use bool hpd_inerrupt directly here.
> > 
> 
> Hello CK,
> 
> ok, I will drop this.
> 
> > > +};
> > > +
> > > +struct mtk_dp_info {
> > > +	u32 depth;
> > > +	enum dp_pixelformat format;
> > > +	struct mtk_dp_timings timings;
> > 
> > There is only one member in struct mtk_dp_timings, so drop struct
> > mtk_dp_timings and use struct videomode vm directly here.
> > 
> 
> This structure will add more variable in following patch.
> whole struct is like,
> struct mtk_dp_timings {
> 	struct videomode vm;
> 	u8 frame_rate;
> 	u32 pix_rate_khz;
> };
> 
> I want to keep this.

I think we could just drop struct mtk_dp_timings and place these member
directly in struct mtk_dp_info.

Regards,
CK

> 
> BRs,
> Bo-Chen
> 
> 
> > Regards,
> > CK
> > 
> > > +};
> > > +
> > 
> > 
> 
>