From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Tengfei Fan <quic_tengfan@quicinc.com>,
will@kernel.org, robin.murphy@arm.com, joro@8bytes.org,
robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
conor+dt@kernel.org, agross@kernel.org, andersson@kernel.org,
konrad.dybcio@linaro.org, catalin.marinas@arm.com
Cc: geert+renesas@glider.be, arnd@arndb.de,
neil.armstrong@linaro.org, nfraprado@collabora.com,
rafal@milecki.pl, peng.fan@nxp.com,
linux-arm-kernel@lists.infradead.org, iommu@lists.linux.dev,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-msm@vger.kernel.org, quic_tsoni@quicinc.com,
quic_shashim@quicinc.com, quic_kaushalk@quicinc.com,
quic_tdas@quicinc.com, quic_tingweiz@quicinc.com,
quic_aiquny@quicinc.com, kernel@quicinc.com
Subject: Re: [PATCH v2 7/8] arm64: dts: qcom: add uart console support for SM4450
Date: Fri, 15 Sep 2023 09:14:10 +0200 [thread overview]
Message-ID: <7c94e075-1702-daa8-41f2-b74aa7c11a11@linaro.org> (raw)
In-Reply-To: <20230915021509.25773-9-quic_tengfan@quicinc.com>
On 15/09/2023 04:15, Tengfei Fan wrote:
> Add base description of UART, TLMM, interconnect, TCSRCC and SMMU nodes
> which helps SM4450 boot to shell with console on boards with this SoC.
>
> Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
> ---
> arch/arm64/boot/dts/qcom/sm4450-qrd.dts | 18 +-
> arch/arm64/boot/dts/qcom/sm4450.dtsi | 313 +++++++++++++++++++++---
> 2 files changed, 301 insertions(+), 30 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm4450-qrd.dts b/arch/arm64/boot/dts/qcom/sm4450-qrd.dts
> index 00a1c81ca397..0f253a2ba170 100644
> --- a/arch/arm64/boot/dts/qcom/sm4450-qrd.dts
> +++ b/arch/arm64/boot/dts/qcom/sm4450-qrd.dts
> @@ -10,9 +10,23 @@
> model = "Qualcomm Technologies, Inc. SM4450 QRD";
> compatible = "qcom,sm4450-qrd", "qcom,sm4450";
>
> - aliases { };
> + aliases {
> + serial0 = &uart7;
> + };
>
> chosen {
> - bootargs = "console=hvc0";
> + stdout-path = "serial0:115200n8";
> };
> };
> +
> +&qupv3_id_0 {
> + status = "okay";
> +};
> +
> +&tlmm {
> + gpio-reserved-ranges = <0 4>, <136 1>;
> +};
> +
> +&uart7 {
> + status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/qcom/sm4450.dtsi b/arch/arm64/boot/dts/qcom/sm4450.dtsi
> index df59027a2f93..3af976478d0d 100644
> --- a/arch/arm64/boot/dts/qcom/sm4450.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm4450.dtsi
> @@ -7,6 +7,8 @@
> #include <dt-bindings/clock/qcom,sm4450-gcc.h>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/interconnect/qcom,icc.h>
> +#include <dt-bindings/interconnect/qcom,sm4450.h>
> #include <dt-bindings/soc/qcom,rpmh-rsc.h>
>
> / {
> @@ -262,6 +264,26 @@
> };
> };
>
> + firmware {
> + scm: scm {
> + compatible = "qcom,scm-sm4450", "qcom,scm";
> + interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
> + #reset-cells = <1>;
> + };
> + };
> +
> + clk_virt: interconnect-0 {
> + compatible = "qcom,sm4450-clk-virt";
> + #interconnect-cells = <2>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + mc_virt: interconnect-1 {
> + compatible = "qcom,sm4450-mc-virt";
> + #interconnect-cells = <2>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> memory@a0000000 {
> device_type = "memory";
> /* We expect the bootloader to fill in the size */
> @@ -350,34 +372,6 @@
> dma-ranges = <0 0 0 0 0x10 0>;
> compatible = "simple-bus";
>
> - apps_rsc: rsc@17a00000 {
> - compatible = "qcom,rpmh-rsc";
You just added this entire node few patches ago. This does not make any
sense.
> - reg = <0 0x17a00000 0 0x10000>,
> - <0 0x17a10000 0 0x10000>,
> - <0 0x17a20000 0 0x10000>;
> - reg-names = "drv-0", "drv-1", "drv-2";
> - interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
> - label = "apps_rsc";
> - qcom,tcs-offset = <0xd00>;
> - qcom,drv-id = <2>;
> - qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>,
> - <WAKE_TCS 3>, <CONTROL_TCS 0>;
> - power-domains = <&CLUSTER_PD>;
> -
> - apps_bcm_voter: bcm-voter {
> - compatible = "qcom,bcm-voter";
> - };
> -
> - rpmhcc: clock-controller {
> - compatible = "qcom,sm4450-rpmh-clk";
> - #clock-cells = <1>;
> - clock-names = "xo";
> - clocks = <&xo_board>;
> - };
> - };
> -
> gcc: clock-controller@100000 {
> compatible = "qcom,sm4450-gcc";
> reg = <0x0 0x00100000 0x0 0x1f4200>;
> @@ -387,12 +381,111 @@
> clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
> };
>
> + qupv3_id_0: geniqup@ac0000 {
> + compatible = "qcom,geni-se-qup";
> + reg = <0x0 0x00ac0000 0x0 0x2000>;
> + ranges;
> + clock-names = "m-ahb", "s-ahb";
> + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
> + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
> + iommus = <&apps_smmu 0x163 0x0>;
> + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>;
> + interconnect-names = "qup-core";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + status = "disabled";
> +
> + uart7: serial@a88000 {
> + compatible = "qcom,geni-debug-uart";
> + reg = <0 0x00a88000 0 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
> + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
> + status = "disabled";
> + };
> + };
> +
> + cnoc2: interconnect@1500000 {
> + compatible = "qcom,sm4450-cnoc2";
> + reg = <0 0x1500000 0 0x6200>;
> + #interconnect-cells = <2>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + cnoc3: interconnect@1510000 {
> + compatible = "qcom,sm4450-cnoc3";
> + reg = <0 0x01510000 0 0xF200>;
> + #interconnect-cells = <2>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + system_noc: interconnect@1680000 {
> + compatible = "qcom,sm4450-system-noc";
> + reg = <0 0x1680000 0 0x19080>;
> + #interconnect-cells = <2>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + pcie_anoc: interconnect@16c0000 {
> + compatible = "qcom,sm4450-pcie-anoc";
> + reg = <0 0x16C0000 0 0x7080>;
> + #interconnect-cells = <2>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + clocks = <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>,
> + <&gcc GCC_CFG_NOC_PCIE_ANOC_AHB_CLK>;
> + };
> +
> + aggre1_noc: interconnect@16e0000 {
> + tible = "qcom,sm4450-aggre1-noc";
> + reg = <0 0x016e0000 0 0x1c080>;
> + #interconnect-cells = <2>;
> + clocks = <&gcc GCC_SDCC2_AHB_CLK>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + aggre2_noc: interconnect@1700000 {
> + compatible = "qcom,sm4450-aggre2-noc";
> + reg = <0 0x01700000 0 0x31080>;
> + #interconnect-cells = <2>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + clocks = <&rpmhcc RPMH_IPA_CLK>,
> + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
> + };
> +
> + mmss_noc: interconnect@1740000 {
> + compatible = "qcom,sm4450-mmss-noc";
> + reg = <0 0x1740000 0 0x19080>;
> + #interconnect-cells = <2>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + video_aggre_noc: interconnect@1760000 {
> + compatible = "qcom,sm4450-video-aggre-noc";
> + reg = <0 0x1760000 0 0x1100>;
> + #interconnect-cells = <2>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> tcsr_mutex: hwlock@1f40000 {
> compatible = "qcom,tcsr-mutex";
> reg = <0x0 0x01f40000 0x0 0x40000>;
> #hwlock-cells = <1>;
> };
>
> + tcsr: syscon@1fc0000 {
> + compatible = "qcom,sm4450-tcsr", "syscon";
> + reg = <0x0 0x1fc0000 0x0 0x30000>;
> + };
> +
> + lpass_ag_noc: interconnect@3c40000 {
> + compatible = "qcom,sm4450-lpass-ag-noc";
> + reg = <0 0x3C40000 0 0x17200>;
> + #interconnect-cells = <2>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> pdc: interrupt-controller@b220000 {
> compatible = "qcom,sm4450-pdc", "qcom,pdc";
> reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
> @@ -403,6 +496,135 @@
> interrupt-controller;
> };
>
> + tlmm: pinctrl@f100000 {
> + compatible = "qcom,sm4450-tlmm";
> + reg = <0 0x0f100000 0 0x300000>;
> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + gpio-ranges = <&tlmm 0 0 137>;
> + wakeup-parent = <&pdc>;
> +
> + qup_uart7_rx: qup-uart7-rx-state {
> + pins = "gpio22";
> + function = "qup1_se2_l2";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + qup_uart7_tx: qup-uart7-tx-state {
> + pins = "gpio22";
> + function = "qup1_se2_l2";
> + drive-strength = <2>;
> + bias-disable;
> + };
> + };
> +
> + apps_smmu: iommu@15000000 {
> + compatible = "qcom,sm4450-smmu-500", "qcom,smmu-500", "arm,mmu-500";
> + reg = <0 0x15000000 0 0x100000>;
> + #iommu-cells = <2>;
> + #global-interrupts = <1>;
> + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 670 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> intc: interrupt-controller@17200000 {
> compatible = "arm,gic-v3";
> reg = <0x0 0x17200000 0x0 0x10000>, /* GICD */
> @@ -471,6 +693,41 @@
> status = "disabled";
> };
> };
> +
> + apps_rsc: rsc@17a00000 {
> + compatible = "qcom,rpmh-rsc";
> + reg = <0 0x17a00000 0 0x10000>,
No, you added it already in previous patch.
Best regards,
Krzysztof
next prev parent reply other threads:[~2023-09-15 7:14 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-15 2:15 [PATCH v2 0/8] soc: qcom: Add uart console support for SM4450 Tengfei Fan
2023-09-15 2:15 ` [PATCH v2 1/8] dt-bindings: firmware: document Qualcomm SM4450 SCM Tengfei Fan
2023-09-15 2:15 ` [PATCH v2 4/8] dt-bindings: arm-smmu: Add compatible for SM4450 SoC Tengfei Fan
2023-09-15 7:11 ` Krzysztof Kozlowski
2023-09-15 7:15 ` Tengfei Fan
2023-09-15 9:10 ` Krzysztof Kozlowski
2023-09-15 8:52 ` Tengfei Fan
2023-09-15 9:10 ` Krzysztof Kozlowski
2023-09-15 2:15 ` [PATCH v2 2/8] dt-bindings: mfd: qcom,tcsr: Add compatible for sm4450 Tengfei Fan
2023-09-15 2:15 ` [PATCH v2 3/8] dt-bindings: interrupt-controller: qcom,pdc: document qcom,sm4450-pdc Tengfei Fan
2023-09-15 2:15 ` [PATCH v2 4/8] dt-bindings: arm-smmu: Add compatible for SM4450 SoC Tengfei Fan
2023-09-15 7:12 ` Krzysztof Kozlowski
2023-09-15 2:15 ` [PATCH v2 5/8] arm64: dts: qcom: sm4450: Add apps_rsc and cmd_db node Tengfei Fan
2023-09-20 3:49 ` Bjorn Andersson
2023-09-22 1:16 ` Tengfei Fan
2023-09-15 2:15 ` [PATCH v2 6/8] arm64: dts: qcom: sm4450: Add RPMH and Global clock controller Tengfei Fan
2023-09-15 7:22 ` Krzysztof Kozlowski
2023-09-18 10:34 ` Tengfei Fan
2023-09-18 11:54 ` Krzysztof Kozlowski
2023-09-15 2:15 ` [PATCH v2 7/8] arm64: dts: qcom: add uart console support for SM4450 Tengfei Fan
2023-09-15 7:14 ` Krzysztof Kozlowski [this message]
2023-09-15 12:12 ` Konrad Dybcio
2023-09-18 10:40 ` Tengfei Fan
2023-09-20 3:47 ` Bjorn Andersson
2023-09-20 5:46 ` Tengfei Fan
2023-09-15 2:15 ` [PATCH v2 8/8] arm64: defconfig: enable interconnect and pinctrl " Tengfei Fan
2023-09-15 7:21 ` Krzysztof Kozlowski
2023-09-15 9:12 ` Tengfei Fan
2023-09-15 9:16 ` Krzysztof Kozlowski
2023-09-15 11:18 ` Tengfei Fan
2023-09-15 11:29 ` Krzysztof Kozlowski
2023-09-16 2:21 ` Trilok Soni
2023-09-16 2:25 ` Trilok Soni
2023-09-16 15:13 ` Georgi Djakov
2023-09-16 20:32 ` Krzysztof Kozlowski
2023-09-16 22:55 ` Georgi Djakov
2023-09-17 7:35 ` Krzysztof Kozlowski
2023-09-18 0:53 ` Tengfei Fan
2023-09-16 20:30 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7c94e075-1702-daa8-41f2-b74aa7c11a11@linaro.org \
--to=krzysztof.kozlowski@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=arnd@arndb.de \
--cc=catalin.marinas@arm.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=iommu@lists.linux.dev \
--cc=joro@8bytes.org \
--cc=kernel@quicinc.com \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=nfraprado@collabora.com \
--cc=peng.fan@nxp.com \
--cc=quic_aiquny@quicinc.com \
--cc=quic_kaushalk@quicinc.com \
--cc=quic_shashim@quicinc.com \
--cc=quic_tdas@quicinc.com \
--cc=quic_tengfan@quicinc.com \
--cc=quic_tingweiz@quicinc.com \
--cc=quic_tsoni@quicinc.com \
--cc=rafal@milecki.pl \
--cc=robh+dt@kernel.org \
--cc=robin.murphy@arm.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).