devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Viresh Kumar <viresh.kumar-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: Rafael Wysocki <rjw-LthD3rsA81gm4RdzfppkhA@public.gmane.org>,
	Viresh Kumar <vireshk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Nishanth Menon <nm-l0cyMroinI0@public.gmane.org>,
	Stephen Boyd <sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Cc: linaro-kernel-cunTk1MwBs8s++Sfvej+rw@public.gmane.org,
	linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Vincent Guittot
	<vincent.guittot-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
	robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	d-gerlach-l0cyMroinI0@public.gmane.org,
	broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Viresh Kumar
	<viresh.kumar-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Subject: [PATCH V7 05/10] PM / OPP: Pass struct dev_pm_opp_supply to _set_opp_voltage()
Date: Thu,  1 Dec 2016 16:28:18 +0530	[thread overview]
Message-ID: <7d55d96e37b04b207c5bf4b17395f95e7ecc19d9.1480564564.git.viresh.kumar@linaro.org> (raw)
In-Reply-To: <cover.1480564564.git.viresh.kumar-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
In-Reply-To: <cover.1480564564.git.viresh.kumar-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>

Pass the entire supply structure instead of all of its fields.

Signed-off-by: Viresh Kumar <viresh.kumar-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Tested-by: Dave Gerlach <d-gerlach-l0cyMroinI0@public.gmane.org>
Reviewed-by: Stephen Boyd <sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
---
 drivers/base/power/opp/core.c | 44 +++++++++++++++++--------------------------
 1 file changed, 17 insertions(+), 27 deletions(-)

diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c
index 188048d3d203..46ad8470c438 100644
--- a/drivers/base/power/opp/core.c
+++ b/drivers/base/power/opp/core.c
@@ -542,8 +542,7 @@ static struct clk *_get_opp_clk(struct device *dev)
 }
 
 static int _set_opp_voltage(struct device *dev, struct regulator *reg,
-			    unsigned long u_volt, unsigned long u_volt_min,
-			    unsigned long u_volt_max)
+			    struct dev_pm_opp_supply *supply)
 {
 	int ret;
 
@@ -554,14 +553,15 @@ static int _set_opp_voltage(struct device *dev, struct regulator *reg,
 		return 0;
 	}
 
-	dev_dbg(dev, "%s: voltages (mV): %lu %lu %lu\n", __func__, u_volt_min,
-		u_volt, u_volt_max);
+	dev_dbg(dev, "%s: voltages (mV): %lu %lu %lu\n", __func__,
+		supply->u_volt_min, supply->u_volt, supply->u_volt_max);
 
-	ret = regulator_set_voltage_triplet(reg, u_volt_min, u_volt,
-					    u_volt_max);
+	ret = regulator_set_voltage_triplet(reg, supply->u_volt_min,
+					    supply->u_volt, supply->u_volt_max);
 	if (ret)
 		dev_err(dev, "%s: failed to set voltage (%lu %lu %lu mV): %d\n",
-			__func__, u_volt_min, u_volt, u_volt_max, ret);
+			__func__, supply->u_volt_min, supply->u_volt,
+			supply->u_volt_max, ret);
 
 	return ret;
 }
@@ -583,8 +583,7 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
 	struct regulator *reg;
 	struct clk *clk;
 	unsigned long freq, old_freq;
-	unsigned long u_volt, u_volt_min, u_volt_max;
-	unsigned long old_u_volt, old_u_volt_min, old_u_volt_max;
+	struct dev_pm_opp_supply old_supply, new_supply;
 	int ret;
 
 	if (unlikely(!target_freq)) {
@@ -634,17 +633,12 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
 		return ret;
 	}
 
-	if (IS_ERR(old_opp)) {
-		old_u_volt = 0;
-	} else {
-		old_u_volt = old_opp->supply.u_volt;
-		old_u_volt_min = old_opp->supply.u_volt_min;
-		old_u_volt_max = old_opp->supply.u_volt_max;
-	}
+	if (IS_ERR(old_opp))
+		old_supply.u_volt = 0;
+	else
+		memcpy(&old_supply, &old_opp->supply, sizeof(old_supply));
 
-	u_volt = opp->supply.u_volt;
-	u_volt_min = opp->supply.u_volt_min;
-	u_volt_max = opp->supply.u_volt_max;
+	memcpy(&new_supply, &opp->supply, sizeof(new_supply));
 
 	reg = opp_table->regulator;
 
@@ -652,8 +646,7 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
 
 	/* Scaling up? Scale voltage before frequency */
 	if (freq > old_freq) {
-		ret = _set_opp_voltage(dev, reg, u_volt, u_volt_min,
-				       u_volt_max);
+		ret = _set_opp_voltage(dev, reg, &new_supply);
 		if (ret)
 			goto restore_voltage;
 	}
@@ -672,8 +665,7 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
 
 	/* Scaling down? Scale voltage after frequency */
 	if (freq < old_freq) {
-		ret = _set_opp_voltage(dev, reg, u_volt, u_volt_min,
-				       u_volt_max);
+		ret = _set_opp_voltage(dev, reg, &new_supply);
 		if (ret)
 			goto restore_freq;
 	}
@@ -686,10 +678,8 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
 			__func__, old_freq);
 restore_voltage:
 	/* This shouldn't harm even if the voltages weren't updated earlier */
-	if (old_u_volt) {
-		_set_opp_voltage(dev, reg, old_u_volt, old_u_volt_min,
-				 old_u_volt_max);
-	}
+	if (old_supply.u_volt)
+		_set_opp_voltage(dev, reg, &old_supply);
 
 	return ret;
 }
-- 
2.7.1.410.g6faf27b

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2016-12-01 10:58 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-01 10:58 [PATCH V7 00/10] PM / OPP: Multiple regulator support Viresh Kumar
2016-12-01 10:58 ` [PATCH V7 02/10] PM / OPP: Reword binding supporting multiple regulators per device Viresh Kumar
2016-12-01 10:58 ` [PATCH V7 06/10] PM / OPP: Add infrastructure to manage multiple regulators Viresh Kumar
2016-12-07  0:39   ` Stephen Boyd
2016-12-01 10:58 ` [PATCH V7 08/10] PM / OPP: Allow platform specific custom set_opp() callbacks Viresh Kumar
2016-12-01 10:58 ` [PATCH V7 09/10] PM / OPP: Don't WARN on multiple calls to dev_pm_opp_set_regulators() Viresh Kumar
     [not found] ` <cover.1480564564.git.viresh.kumar-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2016-12-01 10:58   ` [PATCH V7 01/10] PM / OPP: Fix incorrect cpu-supply property in binding Viresh Kumar
2016-12-01 10:58   ` [PATCH V7 03/10] PM / OPP: Don't use OPP structure outside of rcu protected section Viresh Kumar
2016-12-01 10:58   ` [PATCH V7 04/10] PM / OPP: Manage supply's voltage/current in a separate structure Viresh Kumar
2016-12-01 10:58   ` Viresh Kumar [this message]
2016-12-01 10:58   ` [PATCH V7 07/10] PM / OPP: Separate out _generic_set_opp() Viresh Kumar
2016-12-01 10:58   ` [PATCH V7 10/10] PM / OPP: Don't assume platform doesn't have regulators Viresh Kumar
2016-12-05 14:21 ` [PATCH V7 00/10] PM / OPP: Multiple regulator support Viresh Kumar
     [not found]   ` <CAKohpokXXhcrhzqs+iW+1kTYjyF47bHF0TupMxP=4cSqXOThtA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-12-06  1:34     ` Rafael J. Wysocki
     [not found]       ` <CAJZ5v0gykH+UwMvgU3SCVgxg9Ufe23zQ1o9bEvnjtafVqjLa8Q-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-12-06  3:15         ` Viresh Kumar
2016-12-07  0:37           ` Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=7d55d96e37b04b207c5bf4b17395f95e7ecc19d9.1480564564.git.viresh.kumar@linaro.org \
    --to=viresh.kumar-qsej5fyqhm4dnm+yrofe0a@public.gmane.org \
    --cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=d-gerlach-l0cyMroinI0@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linaro-kernel-cunTk1MwBs8s++Sfvej+rw@public.gmane.org \
    --cc=linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=nm-l0cyMroinI0@public.gmane.org \
    --cc=rjw-LthD3rsA81gm4RdzfppkhA@public.gmane.org \
    --cc=robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=vincent.guittot-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=vireshk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).