From mboxrd@z Thu Jan 1 00:00:00 1970 From: Pierre Yves MORDRET Subject: Re: [PATCH 1/2] dt-bindings: i2c-stm32: remove extra spaces Date: Thu, 21 Mar 2019 09:28:28 +0100 Message-ID: <7ed05148-7719-0fed-989f-21428b9a7d88@st.com> References: <1551885100-22207-1-git-send-email-bich.hemon@st.com> <1551885100-22207-2-git-send-email-bich.hemon@st.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1551885100-22207-2-git-send-email-bich.hemon@st.com> Content-Language: en-US List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Bich HEMON , Rob Herring , Mark Rutland , Maxime Coquelin , Alexandre TORGUE , Wolfram Sang , "linux-i2c@vger.kernel.org" , "devicetree@vger.kernel.org" , "linux-stm32@st-md-mailman.stormreply.com" , "linux-arm-kernel@lists.infradead.org" , "linux-kernel@vger.kernel.org" List-Id: devicetree@vger.kernel.org Reviewed-by: Pierre-Yves MORDRET On 3/6/19 4:11 PM, Bich HEMON wrote: > Remove extra spaces before colons. > > Signed-off-by: Bich Hemon > --- > .../devicetree/bindings/i2c/i2c-stm32.txt | 26 +++++++++++----------- > 1 file changed, 13 insertions(+), 13 deletions(-) > > diff --git a/Documentation/devicetree/bindings/i2c/i2c-stm32.txt b/Documentation/devicetree/bindings/i2c/i2c-stm32.txt > index 69240e1..7d054f1 100644 > --- a/Documentation/devicetree/bindings/i2c/i2c-stm32.txt > +++ b/Documentation/devicetree/bindings/i2c/i2c-stm32.txt > @@ -1,11 +1,11 @@ > * I2C controller embedded in STMicroelectronics STM32 I2C platform > > -Required properties : > -- compatible : Must be one of the following > +Required properties: > +- compatible: Must be one of the following > - "st,stm32f4-i2c" > - "st,stm32f7-i2c" > -- reg : Offset and length of the register set for the device > -- interrupts : Must contain the interrupt id for I2C event and then the > +- reg: Offset and length of the register set for the device > +- interrupts: Must contain the interrupt id for I2C event and then the > interrupt id for I2C error. > - resets: Must contain the phandle to the reset controller. > - clocks: Must contain the input clock of the I2C instance. > @@ -14,25 +14,25 @@ Required properties : > - #address-cells = <1>; > - #size-cells = <0>; > > -Optional properties : > -- clock-frequency : Desired I2C bus clock frequency in Hz. If not specified, > +Optional properties: > +- clock-frequency: Desired I2C bus clock frequency in Hz. If not specified, > the default 100 kHz frequency will be used. > For STM32F4 SoC Standard-mode and Fast-mode are supported, possible values are > 100000 and 400000. > For STM32F7 SoC, Standard-mode, Fast-mode and Fast-mode Plus are supported, > possible values are 100000, 400000 and 1000000. > -- i2c-scl-rising-time-ns : Only for STM32F7, I2C SCL Rising time for the board > +- i2c-scl-rising-time-ns: Only for STM32F7, I2C SCL Rising time for the board > (default: 25) > -- i2c-scl-falling-time-ns : Only for STM32F7, I2C SCL Falling time for the board > +- i2c-scl-falling-time-ns: Only for STM32F7, I2C SCL Falling time for the board > (default: 10) > I2C Timings are derived from these 2 values > -- st,syscfg-fmp: Only for STM32F7, use to set Fast Mode Plus bit within SYSCFG > +- st,syscfg-fmp: Only for STM32F7, use to set Fast Mode Plus bit within SYSCFG > whether Fast Mode Plus speed is selected by slave. > - 1st cell : phandle to syscfg > - 2nd cell : register offset within SYSCFG > - 3rd cell : register bitmask for FMP bit > + 1st cell: phandle to syscfg > + 2nd cell: register offset within SYSCFG > + 3rd cell: register bitmask for FMP bit > > -Example : > +Example: > > i2c@40005400 { > compatible = "st,stm32f4-i2c"; >