From mboxrd@z Thu Jan 1 00:00:00 1970 From: Suzuki K Poulose Subject: Re: [PATCH v4 3/4] dt-bindings: arm: coresight: Unify funnel DT binding Date: Mon, 8 Apr 2019 11:51:16 +0100 Message-ID: <7f63abef-76fc-a767-723d-caacc8da29ae@arm.com> References: <20190406112145.15184-1-leo.yan@linaro.org> <20190406112145.15184-4-leo.yan@linaro.org> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20190406112145.15184-4-leo.yan@linaro.org> Content-Language: en-US Sender: linux-kernel-owner@vger.kernel.org To: leo.yan@linaro.org, mathieu.poirier@linaro.org, robh+dt@kernel.org, mark.rutland@arm.com, alexander.shishkin@linux.intel.com, shiwanglai@hisilicon.com, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org List-Id: devicetree@vger.kernel.org On 04/06/2019 12:21 PM, Leo Yan wrote: > Following the same fashion with replicator DT binding, this patch is to > unify the DT binding for funnel to support static and dynamic modes; > finally we get the funnel DT binding as below: > > Before patch: > > Static funnel, aka. non-configurable funnel: > Not supported; > > Dynamic funnel, aka. configurable funnel: > "arm,coresight-funnel", "arm,primecell"; > > After patch: > > Static funnel: > "arm,coresight-static-funnel"; > > Dynamic funnel: > "arm,coresight-funnel", "arm,primecell"; (obsolete) > "arm,coresight-dynamic-funnel", "arm,primecell"; > > At the end of this patch, it gives an example for static funnel DT > binding, and updates the dynamic funnel example. > > Cc: Mathieu Poirier > Cc: Suzuki K Poulose > Cc: Wanglai Shi > Signed-off-by: Leo Yan > --- > .../devicetree/bindings/arm/coresight.txt | 52 +++++++++++++++++-- > 1 file changed, 48 insertions(+), 4 deletions(-) > > diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt > index f8f794869af2..f8ad11a17cd5 100644 > --- a/Documentation/devicetree/bindings/arm/coresight.txt > +++ b/Documentation/devicetree/bindings/arm/coresight.txt > @@ -8,7 +8,8 @@ through the intermediate links connecting the source to the currently selected > sink. Each CoreSight component device should use these properties to describe > its hardware characteristcs. > > -* Required properties for all components *except* non-configurable replicators: > +* Required properties for all components *except* non-configurable replicators > + and non-configurable funnels: > > * compatible: These have to be supplemented with "arm,primecell" as > drivers are using the AMBA bus interface. Possible values include: > @@ -24,8 +25,11 @@ its hardware characteristcs. > discovered at boot time when the device is probed. > "arm,coresight-tmc", "arm,primecell"; > > - - Trace Funnel: > + - Trace Programmable Funnel, the compatible string > + "arm,coresight-funnel" is obsolete, keep it to support > + the old DT bindings: > "arm,coresight-funnel", "arm,primecell"; > + "arm,coresight-dynamic-funnel", "arm,primecell"; Same comments as the first patch here. > + funnel { > + /* > + * non-configurable funnel don't show up on the AMBA > + * bus. As such no need to add "arm,primecell". > + */ > + compatible = "arm,coresight-static-funnel"; > + clocks = <&crg_ctrl HI3660_PCLK>; > + clock-names = "apb_pclk"; > + > + out-ports { > + port { > + combo_funnel_out: endpoint { > + remote-endpoint = <&top_funnel_in>; > + }; > + }; > + }; > + > + in-ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + combo_funnel_in0: endpoint { > + remote-endpoint = <&cluster0_etf_out>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + combo_funnel_in1: endpoint { > + remote-endpoint = <&cluster1_etf_out>; > + }; > + }; > + }; > + }; > + > funnel@20040000 { Should we rename this to say dynamic_funnel@2004000 { ? > - compatible = "arm,coresight-funnel", "arm,primecell"; > + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; > reg = <0 0x20040000 0 0x1000>; Rest looks fine to me. Suzuki