Re: [PATCH 4/4] arm64: dts: qcom: sm8550: Add video clock controller

[Konrad Dybcio <konrad.dybcio@linaro.org>]

On 9.05.2023 18:12, Jagadeesh Kona wrote:
> Add device node for video clock controller on Qualcomm SM8550 platform.
> 
> Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
> Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/sm8550.dtsi | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> index 6e9bad8f6f33..e67e7c69dae6 100644
> --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> @@ -7,6 +7,7 @@
>  #include <dt-bindings/clock/qcom,sm8550-gcc.h>
>  #include <dt-bindings/clock/qcom,sm8550-tcsr.h>
>  #include <dt-bindings/clock/qcom,sm8550-dispcc.h>
> +#include <dt-bindings/clock/qcom,sm8550-videocc.h>
>  #include <dt-bindings/dma/qcom-gpi.h>
>  #include <dt-bindings/gpio/gpio.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
> @@ -759,6 +760,17 @@ gcc: clock-controller@100000 {
>  				 <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
>  		};
>  
> +		videocc: clock-controller@aaf0000 {
This node should be moved down. Nodes with unit addresses
should be sorted alphanumerically.

> +			compatible = "qcom,sm8550-videocc";
> +			reg = <0 0x0aaf0000 0 0x10000>;
> +			clocks = <&bi_tcxo_div2>, <&gcc GCC_VIDEO_AHB_CLK>;
One per line, please

Also, any reason the XO clock does not come from RPMhCC?

Konrad
> +			power-domains = <&rpmhpd SM8550_MMCX>;
> +			required-opps = <&rpmhpd_opp_low_svs>;
> +			#clock-cells = <1>;
> +			#reset-cells = <1>;
> +			#power-domain-cells = <1>;
> +		};
> +
>  		ipcc: mailbox@408000 {
>  			compatible = "qcom,sm8550-ipcc", "qcom,ipcc";
>  			reg = <0 0x00408000 0 0x1000>;