Re: [PATCH v1 2/3] arm64: dts: qcom: sm8450: Add opp table support to PCIe

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 15/08/2023 14:26, Krishna chaitanya chundru wrote:
> PCIe needs to choose the appropriate performance state of RPMH power
> domain based upon the PCIe gen speed.

This explanation should be also in bindings patch, otherwise why would
we consider the bindings patch?

> 
> So, let's add the OPP table support to specify RPMH performance states.
> 
> Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/sm8450.dtsi | 47 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 47 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> index 595533a..681ea9c 100644
> --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> @@ -381,6 +381,49 @@
>  		};
>  	};
>  
> +	pcie0_opp_table: opp-table-pcie0 {
> +		compatible = "operating-points-v2";
> +
> +		opp-2500000 {
> +			opp-hz = /bits/ 64 <2500000>;
> +			opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
> +		};
> +
> +		opp-5000000 {
> +			opp-hz = /bits/ 64 <5000000>;
> +			opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
> +		};
> +
> +		opp-8000000 {
> +			opp-hz = /bits/ 64 <8000000>;
> +			opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
> +		};
> +	};
> +
> +	pcie1_opp_table: opp-table-pcie1 {
> +		compatible = "operating-points-v2";
> +
> +		opp-2500000 {
> +			opp-hz = /bits/ 64 <2500000>;
> +			opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
> +		};
> +
> +		opp-5000000 {
> +			opp-hz = /bits/ 64 <5000000>;
> +			opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
> +		};
> +
> +		opp-8000000 {
> +			opp-hz = /bits/ 64 <8000000>;
> +			opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
> +		};
> +
> +		opp-16000000 {
> +			opp-hz = /bits/ 64 <16000000>;
> +			opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
> +		};
> +	};
> +
>  	reserved_memory: reserved-memory {
>  		#address-cells = <2>;
>  		#size-cells = <2>;
> @@ -1803,6 +1846,8 @@
>  			pinctrl-names = "default";
>  			pinctrl-0 = <&pcie0_default_state>;
>  
> +			operating-points-v2 = <&pcie0_opp_table>;

Why the table is not here? Is it shared with multiple devices?

Best regards,
Krzysztof