From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kevin Hilman Subject: Re: [PATCH v5 0/6] arm64,hi6220: Enable Hisilicon Hi6220 SoC Date: Thu, 07 May 2015 13:30:25 -0700 Message-ID: <7ha8xgi10e.fsf@linaro.org> References: <1431007225-8513-1-git-send-email-bintian.wang@huawei.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1431007225-8513-1-git-send-email-bintian.wang@huawei.com> (Bintian Wang's message of "Thu, 7 May 2015 22:00:19 +0800") Sender: linux-kernel-owner@vger.kernel.org To: Bintian Wang Cc: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, catalin.marinas@arm.com, will.deacon@arm.com, devicetree@vger.kernel.org, robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, ijc+devicetree@hellion.org.uk, galak@codeaurora.org, mturquette@linaro.org, rob.herring@linaro.org, zhangfei.gao@linaro.org, haojian.zhuang@linaro.org, xuwei5@hisilicon.com, jh80.chung@samsung.com, olof@lixom.net, yanhaifeng@gmail.com, sboyd@codeaurora.org, xuejiancheng@huawei.com, sledge.yanwei@huawei.com, tomeu.vizoso@collabora.com, linux@arm.linux.org.uk, guodong.xu@linaro.org, jorge.ramirez-ortiz@linaro.org, tyler.baker@linaro.org, pebolle@tiscali.nl, arnd@arndb.de, marc.zyngier@arm.com, xuyiping@hisilicon.com, wangbinghui@hisilicon.com, zhenwei.wang@hisilicon.com, victor.lixin@hisilicon.com, puck.c List-Id: devicetree@vger.kernel.org Bintian Wang writes: > Hi6220 is one mobile solution of Hisilicon, this patchset contains > initial support for Hi6220 SoC and HiKey development board, which > supports octal ARM Cortex A53 cores. Initial support is minimal and > includes just the arch configuration, clock driver, device tree > configuration. > > PSCI is enabled in device tree and there is no problem to boot all the > octal cores, and the CPU hotplug is also working now, you can download > and compile the latest firmware based on the following link to run this > patch set: > https://github.com/96boards/documentation/wiki/UEFI Do you have any tips for booting this using the HiSi bootloader? It seems that I need to add the magic hisi,boardid property for dtbTool to work. Could you share what that magic value is? and maybe add it to the wiki someplace? Thanks, Kevin