* [PATCH v2] arm64: dts: meson-axg: Enable GPIO interrupt controller
@ 2018-12-01 16:43 Carlo Caione
2018-12-05 14:50 ` Jerome Brunet
0 siblings, 1 reply; 3+ messages in thread
From: Carlo Caione @ 2018-12-01 16:43 UTC (permalink / raw)
To: robh+dt, khilman, devicetree, linux-arm-kernel, linux-amlogic,
jbrunet
Cc: Carlo Caione
Enable the GPIO interrupt controller for the AXG SoCs.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
---
Tested on a custom board derived from S400.
@Jerome: I know you had problems with this. I tested this on the apollo
board with the PHY IRQ and it seems to work fine. You probably want to
N/ACK this.
---
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index df017dbd2e57..a7d8219f7373 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -1414,12 +1414,12 @@
};
gpio_intc: interrupt-controller@f080 {
- compatible = "amlogic,meson-gpio-intc";
+ compatible = "amlogic,meson-axg-gpio-intc",
+ "amlogic,meson-gpio-intc";
reg = <0x0 0xf080 0x0 0x10>;
interrupt-controller;
#interrupt-cells = <2>;
amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
- status = "disabled";
};
pwm_ab: pwm@1b000 {
--
2.19.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-12-05 17:09 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-12-01 16:43 [PATCH v2] arm64: dts: meson-axg: Enable GPIO interrupt controller Carlo Caione
2018-12-05 14:50 ` Jerome Brunet
2018-12-05 17:09 ` Kevin Hilman
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).