From mboxrd@z Thu Jan  1 00:00:00 1970
From: Kevin Hilman <khilman@baylibre.com>
Subject: Re: [PATCH] arm64: dts: meson: sm1: set gpio interrupt controller compatible
Date: Thu, 05 Sep 2019 13:40:09 -0700
Message-ID: <7hpnkeqxxy.fsf@baylibre.com>
References: <20190902160334.14321-1-jbrunet@baylibre.com>
Mime-Version: 1.0
Content-Type: text/plain
Return-path: <linux-kernel-owner@vger.kernel.org>
In-Reply-To: <20190902160334.14321-1-jbrunet@baylibre.com>
Sender: linux-kernel-owner@vger.kernel.org
Cc: Jerome Brunet <jbrunet@baylibre.com>, linux-amlogic@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
List-Id: devicetree@vger.kernel.org

Jerome Brunet <jbrunet@baylibre.com> writes:

> Set the appropriate gpio interrupt controller compatible for the
> sm1 SoC family. This newer version of the controller can now
> trig irq on both edge of the input signal
>
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>

Queued.

I may do a late round for the dev cycle of v5.4, otherwise this will go
for v5.5.  If it goes for v5.5, it should probably have a Fixes tag, no?

Kevin

> ---
>  arch/arm64/boot/dts/amlogic/meson-sm1.dtsi | 5 +++++
>  1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
> index 521573f3a5ba..6152e928aef2 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
> @@ -134,6 +134,11 @@
>  	power-domains = <&pwrc PWRC_SM1_ETH_ID>;
>  };
>  
> +&gpio_intc {
> +	compatible = "amlogic,meson-sm1-gpio-intc",
> +		     "amlogic,meson-gpio-intc";
> +};
> +
>  &pwrc {
>  	compatible = "amlogic,meson-sm1-pwrc";
>  };
> -- 
> 2.21.0