Re: [PATCH 05/12] arm64: dts: qcom: sm8650: move USB graph to the SoC dtsi

[neil.armstrong@linaro.org]

On 29/04/2024 14:43, Dmitry Baryshkov wrote:
> Move the graph connection between USB host, USB SS PHY and DP port to
> the SoC dtsi file. They are linked in hardware in this way.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>   arch/arm64/boot/dts/qcom/sm8650-qrd.dts | 13 -------------
>   arch/arm64/boot/dts/qcom/sm8650.dtsi    |  4 ++++
>   2 files changed, 4 insertions(+), 13 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts
> index 4e94f7fe4d2d..65ee00db5622 100644
> --- a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts
> @@ -832,7 +832,6 @@ &mdss_dp0 {
>   
>   &mdss_dp0_out {
>   	data-lanes = <0 1>;
> -	remote-endpoint = <&usb_dp_qmpphy_dp_in>;
>   };
>   
>   &pcie_1_phy_aux_clk {
> @@ -1211,10 +1210,6 @@ &usb_1_dwc3_hs {
>   	remote-endpoint = <&pmic_glink_hs_in>;
>   };
>   
> -&usb_1_dwc3_ss {
> -	remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
> -};
> -
>   &usb_1_hsphy {
>   	vdd-supply = <&vreg_l1i_0p88>;
>   	vdda12-supply = <&vreg_l3i_1p2>;
> @@ -1233,18 +1228,10 @@ &usb_dp_qmpphy {
>   	status = "okay";
>   };
>   
> -&usb_dp_qmpphy_dp_in {
> -	remote-endpoint = <&mdss_dp0_out>;
> -};
> -
>   &usb_dp_qmpphy_out {
>   	remote-endpoint = <&redriver_ss_in>;
>   };
>   
> -&usb_dp_qmpphy_usb_ss_in {
> -	remote-endpoint = <&usb_1_dwc3_ss>;
> -};
> -
>   &xo_board {
>   	clock-frequency = <76800000>;
>   };
> diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
> index 8e0c1841f748..4624ea4906d9 100644
> --- a/arch/arm64/boot/dts/qcom/sm8650.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
> @@ -3675,6 +3675,7 @@ port@1 {
>   						reg = <1>;
>   
>   						mdss_dp0_out: endpoint {
> +							remote-endpoint = <&usb_dp_qmpphy_dp_in>;
>   						};
>   					};
>   				};
> @@ -3767,6 +3768,7 @@ port@1 {
>   					reg = <1>;
>   
>   					usb_dp_qmpphy_usb_ss_in: endpoint {
> +						remote-endpoint = <&usb_1_dwc3_ss>;
>   					};
>   				};
>   
> @@ -3774,6 +3776,7 @@ port@2 {
>   					reg = <2>;
>   
>   					usb_dp_qmpphy_dp_in: endpoint {
> +						remote-endpoint = <&mdss_dp0_out>;
>   					};
>   				};
>   			};
> @@ -3864,6 +3867,7 @@ port@1 {
>   						reg = <1>;
>   
>   						usb_1_dwc3_ss: endpoint {
> +							remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
>   						};
>   					};
>   				};
> 

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>