From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bartlomiej Zolnierkiewicz Subject: Re: [PATCH 1/2 v4] video: fbdev: imxfb: support AUS mode Date: Fri, 21 Apr 2017 16:49:43 +0200 Message-ID: <8077683.5av1QGK6yz@amdc3058> References: <1488193030-13064-1-git-send-email-martin@kaiser.cx> <1492770549-7347-1-git-send-email-martin@kaiser.cx> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7Bit Return-path: In-reply-to: <1492770549-7347-1-git-send-email-martin-XxZfDwE/svGeZLLa646FqQ@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Martin Kaiser Cc: linux-fbdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Sascha Hauer , linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Rob Herring , Mark Rutland , devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org On Friday, April 21, 2017 12:29:08 PM Martin Kaiser wrote: > Some displays require setting AUS mode in the LDCD AUS Mode Control > Register to work with the imxfb driver. Like the value of the Panel > Configuration Register, the AUS mode setting depends on the display > mode. > > Allow setting AUS mode from the device tree by adding a boolean > property. Make this property optional to keep the DT ABI stable. > AUS mode can be set only on imx21 and compatible chipsets. > > Signed-off-by: Martin Kaiser Patch queued for 4.12, thanks. Best regards, -- Bartlomiej Zolnierkiewicz Samsung R&D Institute Poland Samsung Electronics -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html